Loading
Loading…
Loading…
Tender Value
₹16.9 L
EMD Value
₹42,370
Closing Date
28 May 2026, 10:30 pmClosed
North Western Karnataka Road Transport Corporation
Sommappa V Anagadi
Repairs to existing Tyre retreading plant building and replacing AC roof sheets to metacular sheet at DWS Sirsi. (SC Category)
NWKRTC/2026-27/OW/WORK_INDENT78
NWKRTC/2026-27/OW/WORK_INDENT78
Open
Other Works
Two Tender Document System(Two Cover)
North Western Karnataka Road Transport Corporation Head Office
4 documents required · 4 mandatory
To Qualify for award of this contract the Tenderer must have valid Class - 4 and above Civil Contractors Registration Certificate, registered in KPWD / MES / CPWD as on the Date of Tender Notification. Scanned copy of Valid contractors Registration Certificate.
To qualify for award of this contract, the tenderer must have a Schedule Cast Certificate. Scanned copy of self attested valid Schedule Cast certificate issued by competent authority.
To qualify for award of this contract, the tenderer must have a financial turnover Certificate. Scanned copy of year wise financial turnover. (Certified by Chartered Accountant only. Statement issued by others will not qualify for eligibility).
To Qualify for award of this contract the assessed available tender capacity of the tenderer should be more than the amount put to tender. Note: The bid capacity of the tenderer is calculated based on the formula. Assessed Available Tender Capacity : ( (A X N x 5) - B) Where A : Maximum value of Civil Engineering works, updated to 2025-26 price level, executed in any one year during the last five years.( Completed as well as works in progress ). B : Value at 2025-26 price level of existing commitments and ongoing works to be completed during the next two years. N : Number of years prescribed for completion of the work for which tender is invited. 5 : Multiplying factor for assessing the available tender capacity for works costing upto Rs.100.00Lakhs. The Bidder/Contractor must upload the Scanned copy of details of existing commitments and ongoing works to be completed in the prescribed format only (Annexure-B) duly signed. In case the Bidder does not have any existing commitments, the same should be indicated as NIL in the prescribed format, duly signed. Details uploaded in any other format or uploaded documents in which the Bidder himself has calculated the Bid capacity will not be considered for evaluation and also will not qualify for eligibility.
Not Applicable
₹500
₹42,370
20 May 2026
20 May 2026
30 May 2026
22 May 2026
Repairs to existing Tyre retreading plant building and replacing AC roof sheets to metacular sheet at DWS Sirsi. (SC Category)
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material t. (CSR-2023-24-Vol 2 P no 187,/ I no19.7.3)
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge. (CSR-2023-24-Vol 2 P no 189,/ I...
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge. (CSR-2023-24-Vol 2 P no 189,/ I...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming c...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Eng...
Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. ( CSR 2023-24 V2 Pg 187/ Ino 19.2.1)
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engi...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing and fixing M.S. grills of required pattern in frames of win- dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to op...
Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elasto...
Providing Honne wood wrought and putup for purlins, common rafter sand similar work including cost of materials, labour, usage charges complete as per specifications. SRP- Vol-2 (99/12.2)
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS a...
Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doo...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. as pe...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pain...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Supplying labour for removing Debries and cleaning CSR 2023-24 V1 P A 50/IV
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. Vol-2/132/12.68.2) 100x58x1.9mm
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : Vol-2/132/12.72)
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : Vol-2/132/12.73.1) 125mm
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Tender notification Sirsi TRP.docx
Instructions to Tenderers • 0.56 MB
Annexure B Bid Capacity.doc
Others - Annexure B Format • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .