Construction of Dada Dadi park at Inder Nagar near Jamalta House in ward No 20 Dhalli (SH Construction of Park Providing and Fixing Playing instruments and open air GYM Equipments with defect liability Period of three years) under Shimla Smart City

Amount

Cutting in earth work in all kinds of soil including spade work, pick work, jumper work and blasting work and disposal of excavated earth up to all leads and lifts as directed by Engineer-in-Charge. (Disposal of earth/muck in MC dumping site at Bharyal free of cost, transportation charges will be paid extra)

Excavation in earth work in all kinds of earth work including spade work, pick work, jumper work, B/work chiseling wedging out of rock etc. up to all lifts in earth work including dressing of sides and bed and disposing of excavated earth to be leveled and neatly dressed as directed by the Engineer-in-charge. (Disposal of earth/muck in MC dumping site at Bharyal free of cost, transportation charges will be paid extra)

Providing and laying cement concrete 1:6:12 (1 cement: 6 sand: 12 graded stone aggregate 40mm nominal size) and curing complete excluding cost of centring and shuttering in Foundation and plinth

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling upto all heights and removal of the same for insitu-reinforced concrete & plain concrete work in Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters buttresses, plinth and string courses and the like

Providing and laying cement concrete 1:5;10 (1cement :5sand :10 graded stone aggregate 40mm. nominal size) with 15 % plum and curing complete excluding cost of form work in retaining walls/ Breast walls, the size of plums shall usually be 150mm. to 300mm. as per H.P.P.W.D.Specification.

Stone filling behind retaining walls :

P/L PVC Pipe 100mm dia for weep holes.

Random rubble maonsry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement: 6 sand; 12 graded stone aggregate 20mm nominal size) at plinth level in cement mortar 1:6 (1 cement: 6 sand)

P/L heavy duty out door Grass concrete Pavers for parks and ground etc. (Size 450x500x80mm) ISI mark

P/F M.S. Rest Benches Three Seater Size 1.65x0.75mtr with C.I. Rest Arms weight not less than 65kg (inc carriage of materials within all leads and lifts)

Providing and Fixing FRP Monkey Dustbin for approved quality Size 3'6" height (inc carriage of materials within all leads and lifts)

Providing and fixing heavy duty Standard See saw Arc swing Area 9.6 ft x 5.5 ft 2.4 meter high around level consisting of top bar of swing made by 80mm dia MS pipes and 2 nos. chain should be minimum 6mm thick electro galvanized tested with in built 2 nosfor safe and comfortable swing. Antiskid chequred reinforced FRP belt should be Heavy duty only. Net is made up of 16 mm six stranded terylene rope. Each strand consist of 1.5 mm steel core wire in terylene fibrecore of sisal & hemp is given in the rope for adequate flexibility, rope end is secured with GI sleeve 16 mm crimped on both end , and proper fixed in cement concrete block of size 0.60x0.60x0.75mtr. (inc carriage of materials within all leads and lifts All material of the euipment/instruments should be ISI marked)

Providing and fixing heavy duty Double ARC swing slide 12'x6' slide made out of fiber structure with centre support. The ROTO is required 4mm thick and GI C CLASS pipe used. Landing module is support with 20mm pipe. The ladder M.S railing made up 20mm pipes with triangular /straight steps 16 SWG sheets. Net is made up of 16 mm six stranded terylene rope, consist of 1.5 mm steel core wire in terylene fibrecore of sisal & hemp is given in the rope for adequate flexibilityend is secured with GI sleeve 16 mm crimped on both end . PULL OUT LOAD TEST OF ROPE CONFIRMING MINIMUM 16000 NEWTON FORCE Should be Submitted AS WHEN REQUIRED. The pure polyster powder coating /PU coating done on the pipes extends the life of equipments. Also the foundation is done as per ISI Standard. (inc carriage of materials within all leads and lifts All material of the euipment/instruments should be ISI marked)

Providing and fixing heavy duty FRP ( Fibre reinforced plastic Double wave slide) Double wave slider revolving plateform are made up of Fibre and steel. Net is made up of 16 mm six stranded terylene rope core of sisal & hemp is given in the rope for adequate flexibility, end is secured with GI sleeve 16 mm crimped on both end, consist of 1.5 mm steel core wire in terylene fibre PULL OUT LOAD TEST OF ROPE CONFIRMING MINIMUM 16000 NEWTON FORCE Should be Submitted AS WHEN REQUIRED.The platform of this consists of non skid fibre made with 6mm thickness. The platform frame is made in 25x5x and 40x5 MS angle. It is provide with handrails of 20mm MS. Pipes (Product Area 13.5 ft x8.3 ft. Save PLay Area 19.5 ftx14.3 ft) (inc carriage of materials within all leads and lifts All material of the euipment/instruments should be ISI marked)

Chest Press :- Providing designing and fixing heavy duty chest press having Dimension:• Area : 12 ft x8 ft, Age group: 13 above yrs Functions: STRENGTHENS GLUTES, CHEST, SHOULDER,UPPER AND MID ABS, FOREARM AND TRICEPS. (All material of the euipment/instruments should be ISI marked) TECHNICAL SPECIFICATIONS:-CENTER FRAME : 140 NB GI C-CLASS PIPE- MAIN FRAME : 32 NB GI C-CLASS PIPE - HANDLE FRAME : 32 NB GI C-CLASS PIPE -,SEAT FRAME : 32 NB & 25 NB & 40 NB GI C-CLASS PIPE -.SEAT & BACK REST: LLDP ROTOMOULDED SEAT WITH SINGLE FRAME OF BACK REST WITH INBUILT BOLTS 3/8" X 1.5"PIPE CAP: GALVANISED CAP. BEARING SYSTEMS: SELF LOCKING SYSTEMS. IT WILL RESTRICT ITS MOVEMENT IN 120° ANGLE WITH INBUILT LOCK IN BUSH TO MAINTAINITS MOVEMENT.BEARING HOUSING AND PIN :SEAMLESS PIPE & ROUND BAR.BEARINGS : REPUTED MAKE (FAG/SKF)NUT BOLTS: GALVANISED NUT BOLTS.NUT BOLTS CAP: NYLON 66 INJECTION MOULDED WITH SS M6 FASTNERS.POWDER COAT: DONE BY FIRST COAT OF PRIMER – JOTUN BRAND 50-70 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 80-90 MICRON THICKNESS. TOTAL THICKNESS IS 120-140 MICRON. The equipment shall be fixed on ground with concrete of minimum strength M-25 with J-bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete with Defect Liability Period of Three years. (inc carriage of materials within all leads and lifts)

Step Trainer :-Providing, designing and fixing heavy duty Step Trainer Machine having Dimension:• Area : 11 ft x 8 ft,• Age Group: 13 Above yrs.Functions: Strengthen Leg Muscles,Increase CardioVascular endurance, & improves Reflexes. (All material of the euipment/instruments should be ISI marked) TECHNICAL SPECIFICATIONS:-MAIN FRAME : 140 NB G.I.C- CLASS PIPES - FOOT REST PIPE : 40 NB G.I. C CLASS PIPE FOOT REST: LLDP ROTOMOULDED SEATOF SINGLE FRAME WITH BACK REST WITH INBUILT BOLTS 3/8" X 1.5".HANDLE : 40 NB & 25 NB GI C CLASS PIPE . HANDLE COVER: NEOPRENE RUBBER. BEARINGS : REPUTED MAKE (FAG/SKF) PIPE CAP: GALVANISED CAP.NUT BOLTS: GALVANISED NUT BOLTS.NUT BOLTS CAP: NYLON 66 INJECTION MOULDED WITH SS M6 FASTNERS. SELF LOCKING BEARING SYSTEMS. IT WILL RESTRICT ITS MOVEMENT IN 120° ANGLE. PU RING IS PROVIDED FOR SMOOOTH AND IMPACT FREE MOVEMENT OF LEG FRAME.POWDER COAT: DONE BY FIRST COAT OF PRIMER – JOTUN BRAND 50-70 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 80 - 90 MICRON THICKNESS. TOTAL THICKNESS IS 120-140 MICRON. The equipment shall be fixed on ground with concrete of minimum strength M-25 with J-bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete with Defect Liability Period of Three years. (inc carriage of materials within all leads and lifts)

Fun Rover :- Providing, designing and fixing heavy duty Fun Rover having Dimension:- Area : 10 ft X 8 ft,• Age Group: 13 Above yrs.Functions: Strengthens back muscles, shoulder armmuscles and abdomen, also improves cardio vascularendurance. (All material of the euipment/instruments should be ISI marked) TECHNICAL SPECIFICATIONS:-MAIN FRAME: 140 NB GI C-CLASS PIPE SEAT FRAME: 50 NB GI C-CLASS PIPE - HANDLE FRAME: 32 NB GI C-CLASS PIPE - PIPE CAP: GALVANISED CAP.BEARING CAP: NYLON 66 INJECTION MOULDED. BEARING SYSTEMS: SELF LOCKING SYSTEMS. IT WILL RESTRICT ITS MOVEMENT IN 120° ANGLE WITH INBUILT LOCK IN BUSH TO MAINTAINITS MOVEMENT. PU RING IS PROVIDED FOR SMOOOTH AND IMPACT FREE MOVEMENT OF LEG FRAME. HOUSING AND PIN: SEAMLESS PIPE & ROUND BAR.NUT BOLTS: GALVANISED NUT BOLTS.NUT BOLTS CAP: NYLON 66 INJECTION MOULDED WITH SS M6 FASTNERS.BEARINGS:PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) POWDER COAT: DONE BY FIRST COAT OF PRIMER – JOTUN BRAND 50-70 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 80 - 90 MICRON THICKNESS. TOTAL THICKNESS IS 120 - 140 MICRON. The equipment shall be fixed on ground with concrete of minimum strength M-25 with J-bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete with Defect Liability Period of Three years. (inc carriage of materials within all leads and lifts)

shoulder Twirl Double :-Providing, designing and fixing heavy duty Big wheel having Dimension:-Area : 8 ft X 8 ft,• Age Group: 13 Above yrs.Functions: Strengthen Shoulder and Improves body consistency & eligibility. (All material of the euipment/instruments should be ISI marked) TECHNICAL SPECIFICATIONS:-MAIN FRAME: 140 NB GI C-CLASS PIPE -WHEEL FRAME: 25 NB & 20 NB GI C-CLASS PIPE -PIPE CAP:-GALVANISED CAP.BEARING CAP: NYLON 66 INJECTION MOULDED.BEARING HOUSING AND PIN: SEAMLESS PIPE & ROUND BAR. NUT BOLTS: GALVANISED NUT BOLTS. NUT BOLTS CAP: NYLON 66 INJECTION MOULDED WITH SS M6 FASTNERS.BEARINGS: PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) POWDER COAT: DONE BY FIRST COAT OF PRIMER – JOTUN BRAND 50-70 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 80-90 MICRON THICKNESS. TOTAL THICKNESS IS 120-140 MICRON. The equipment shall be fixed on ground with concrete of minimum strength M-25 with J-bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete with Defect Liability Period of Three years. (inc carriage of materials within all leads and lifts)

suresh jagta

SATISH KUMAR JAGTA

Durgesh Singh