CONSTRUCTION OF PRIMARY HEALTH CENTER WITH RESIDENTAIL ACCOMENDATION AT VILLAGE BHANBORI IN DISTT HISSAR(PDG. STREET LIGHT ONLY)

Amount

Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections. ake: L&T/ Siemens/ ABB/ Legrand/ C&S. (HSR 31.12 (a) a) Double pole switch 16 amp. 240 Volts,Cat-C

Miniature Circuit Breaker and Isolator: Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. Make: L&T/ Siemens/ ABB/ Legrand/ C&S/ Havell's. (HSR 31.17). Miniature circuit breakers of 9 KA breaking capacity. ii) SP MCB 6 amp. to 32 amp.

viii) SPN MCB of 9 KA breaking capacity 40 amp. to 63 amp.

Pipe Laying: Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. (HSR 31.21).

xii) Galvanized iron pipe 40 mm dia on flushed xxvii) Galvanized iron flexible pipe complete with socket nipples and check nuts etc. at both ends ( upto length of 1 meter.) b) Size 20 mm dia

(Q) Earthing (HSR 31.22): i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . .

ii) Extra for using salt and charcoal / coke for pipe earth electrode as required

xii) Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required .

Supply and erection of under ground cable 1 metre below ground level covered with sand and bricks including necessary connections, digging and refiling of trenches. Make: Havell's/ RR Kabel/ Polycab/ Plaza/ Kent. (HSR 31.25). v) 16 Sq. mm 2 Core Cable . Ard.

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections. Make: Havell's/ RR Kabel/ Polycab/ Plaza/ Kent. (HSR 31.26). iv) 10 Sq. mm 2 Core Cable.Ard.

v) 16 Sq. mm 2 Core Ard. Cable.

Supply and erection of suitable compression type brass cable glands for underground Cable. (HSR 31.28). ii) 10 Sqmm to 16 Sqmm Cable 2 to 4 Core .

Street Light. (HSR 31.30): IV) Supply and erection of weather proof M.S.Box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S.sheet hinged cover, locking arrangements , housed in wall , including the cost of 1 no. 16 amp. 415 volts kit-kat and 2 nos. 63 amp. 415 volts neutral links fixed on hard wood board in the M.S.Box including painting and necessary connections .

S/E of of PVC unsheathed copper conductor cable single core 1100 volts grad in pipe of suitable size excluding cost and erection of pipe. (HSR 31.40). i) Cable size 1.5 sqm(3/0.81 mm)

S/E of double door sheet steel enclosure distribution board suitable for MCCb and ELCBs recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work. Make: L&T/ Siemens/ ABB/ Legrand/ C&S/ Havell's. (HSR 31.41). ii) 8-way, SP&N (Horizontal)

S/E of MS saddles and clamps on wall/ RCC parapet for fixing underground cable at a distance of 0.60 meter centre to centre fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect upto the Engineer-in-Charge of the work. (HSR 31.48).

Supply and erection of 50mm diameter 1.5mtr. Long GI bracket (B-Class) making an angle 10 to 15 degree with horizontal plane for mounting street light fitting on GI bracket on wall with 2 Nos. 50mmx3mm thick MS flat including cost of cutting welding of GI bracket on wall with 2 nos. 50mm x 3mm thick MS flate including cost of cutting welding of GI pipe complete with cement sand mixture bolts and nuts etc including making necessary connection in all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. (HSR 31.53).

Supply and errection of Hot Dip Galvanized octagonal pole 3 mm thickness, with base plate including of nut and bolts and all accessories as supplied by the manufacture including cost of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanized pole complete of 2 nos. 100 A, 4 pole nature links including connection etc with suitable connection arrangements for 2 no. MCB/ kit kat including cost of RCC 1:1:5:3 for foundation of size 0.7 m x 0.7m x 1.8 m with minimum 8 Nos. 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm CC for fixing the pole with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. Make:Philips/ Bajaj/ Volmont/ Skipper/ Vipin ST-poles. (HSR 31.68). i) 7 M long pole with top dia 70 mm and bottom dia 130 mm with base plate of size 220 x 220 x 12mm.

Non Schedule Items: Supply & Erection of Single arms bracket made of 32/50mm dia GI pipe B class ISI 1.20 mtr. Long with coller pipe (GI) 75mm dia 60cm Long top covered with ornamental cap duly welded, painted 2 coats of aluminum paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-incharge. Bracket duly erected on existing 7/9 Mtr. High Octagonal pole including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-incharge of the work.

Non Schedule Items: Supply & Erection of double arms bracket made of 32/50mm dia GI pipe B class ISI 1.20 mtr. Long with coller pipe (GI) 75mm dia 60cm Long top covered with ornamental cap duly welded, painted 2 coats of aluminum paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-incharge. Bracket duly erected on existing 7/9 Mtr. High Octagonal pole including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-incharge of the work.

Non Schedule Items: Supply and erection of 25 W LED Post lantern new generation energy saving envirmental friendly long life aesthetically desinged with symmetrical light distribution, spen aluminium land scap luminiaries with high power LED as light source with the protection of IP-65 of LHEVBGP7PN 6K 025 (Rubby clear) of Havell's make/ BLPTSP 25 W NW LED of Bajaj make/ LPTH-20- CDL of Crompton make complete with all accessories and labour to complete the job upto the entire satisfaction of Engineer-in-charge of the work.

Non Schedule Items: S/E of 60 W LED street light fitting 120 Lumens per Watt Philips / Bajaj/ Havell's/ Crompton make in aluminum pressure die casting housing toughened glass cover with IP-66 protection With Lense and dual surge protection device internal 5 KV and external 10 KV including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work.

Rajesh Electric Works