Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹12.6 Laccepted-aoc | ₹12.6 L | accepted-aoc |
Tender Value
₹20 L
EMD Value
₹50,000
Closing Date
19 May 2026, 10:59 pmClosed
Mysore Urban Development Authority
Roopashree
Developement of park
MUDA/2026-27/OW/WORK_INDENT284
MUDA/2026-27/OW/WORK_INDENT284
Open
Other Works
Electronic Documents, First(One Cover)
MUDA Commissioner Office Mysuru
3 documents required · 3 mandatory
₹500
₹50,000
19 May 2026
5 May 2026
18 May 2026
Developement of park in NGO colony in Nanjangud town in Mysuru Developement Authority limits
Clearing Grass and Removal of Rubbish & dumping to outside periphery by manual means. Ref to MoRT&H : IRC - 201 ---- With all lead and lift and as per the direction of Engineer In Charge of work
Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
Providing Water based glossy paint (Green certified product) to Kerb Stones as per IS 164:2015 technical specifications including cleaning & surface preparation. Ref to MoRT&H : IRC - IS 164:2015 ----...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Dismantling of Structures - Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, inc...
Providing Size Stone masonry with hard stone in foundation & plinth with
Cement mortar 1:6 (1 cement : 6 coarse sand) ---- With all lead and lift and as per the direction of Engineer In Charge of work
Providing ruled pointing to coursed stone masonry with lime mortar 1:3, 20mm deep, after raking joints to depth of 20mm nicely lining, including cost all materials, labour, usage charges of machinery,...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
PUPPY DOG RIDER
Supply and Fixing of Puppy Dog Rider / Elephant Rider / Horse Rider: "" The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "" As...
TWO SEATERSEE SAW
Supply & Fixing of Two Seater See Saw : "" The product to match the colours, design, size, contours and
aesthetics exactly as per the image attached. ""As per NIUA Guidelines, All pr...
A SWINGSupply & Fixing of A Swing The product to match the colours, design, size, contours and aesthetics exactly
as per the image attached. As per NIUA Guidelines, all components designed and manufac...
Mild Steel Park Benches
Supply, Transportation, Installation of Mild Steel (MS) Park Benches with Nano-Coated Wooden Finish (Teak/Rosewood Grains).The MS benches are manufactured fr0m mild steel. The ...
Dust Bins Capacity: 60 Liters
Supply, Transportation, Installation of Plastic Pole Hanging Dustbins, Frame: Mild Steel, Black Powder Coated, Dustbin: High Density Polyethylene Plastic, Height of the s...
Dust Bins Capacity: 60 Liters
Supply, Transportation, Installation of Plastic Pole Hanging Dustbins, Frame: Mild Steel, Black Powder Coated, Dustbin: High Density Polyethylene Plastic, Height of the s...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Fabricating, supplying and erecting swaged tubular pole of height …Mtr having three sections, and providing twocoats of red oxide paint and finished with two coats of enamelled paint of approved qua...
Supplying and fixing of 4 pole power contactor with NO/NC contacts on existing wood/panel boaard using necessary bolts,nuts, was
hers and wiring etc., completee with ac-3 rating and as per IS-13947 40...
Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water ...
Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.
SR 2023-24-VOL-6, Itme No 5.48, Page No-21 of 105 ---- With all lead and lift and as p...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...
Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M...
Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.
SR 2023-24-VOL-6, Itme No 13.5...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff
2.5 sqmm to 25 sqmm
SR 2023-24-VOL-6, Itme No 21.05, Page No-52 ...
Supplying and fixing of solar Lux level street light control switch single phase including suitable capacity contactor -3Kw
SR 2023-24-VOL-6, Itme No 5.49.1, Page No-21 of 105 ---- With all lead and l...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.
25 Sqmm Copper Terminal, Apprx Wt: 11 Gm
SR 2023-24-VOL-6, Itme No 59.01, Page No-26 of 81
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.
25x3mm GI strip
SR 2023-24-VOL-6, Itme No 12.58.1, Page No-54 of 105
---- With all l...
LT UG Cable.Heat shrinkable Straight Through Joint.2.5 to 25 Sqmm
SR 2023-24-VOL-6, Itme No 22.09, Page No-52 of 81 ---- With all lead and lift and as per the direction of Engineer In Charge of work
LT UG Cable.Heat shrinkable Type Terminations.2.5 to 25 Sqmm
SR 2023-24-VOL-6, Itme No 22.13, Page No-53 of 81
---- With all lead and lift and as per the direction of Engineer In Charge of work
150 CM SLIDE Supply & Fixing of 150 CM Slide: The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. As per NIUA Guidelines, all products must be te...
Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M...
Geophysical investigationatsiteforsinkingborewellsforsupplyingdrinkingwatertothehabitationeither through theHandPumpMWSorP.W.S.S,byverticalelectricalsoundingbyadoptingVennerorSchlumbergers’smethod, ...
Providing,supplyingtoworksite,SubmersiblePumpSetof150mmdiasuitableforborewellandconfirmingtoIS 8034-2000;3Phase,SSBowl&ImpellerwithLowvoltMotorasperspecifications,aspernecessaryammendments andinstruct...
LabourchargesforErection,ElectrificationandcommissioningofPumpsets, includingaligningandbalancingof all itemsincludingsupplyanderectionoftwopairofsupportingclamps,borewellcaps,cableclipsandwatertight ...
Supplyinganddrawing3core flat PVCsheathedsubmersiblepumpcablemanufacturedwithelectrolyticgrade copperwith flexible copperwith lowresistance conductor confirming to13:8130-1984 and virgin gradePVC insu...
Supply, installing,testingandcommissioningCOMMONcontrolpanel consistingof thefollowingINCOMING:1 NosetofPhaseindicatinglampswithSFUofsuitablerating1No,AnalogAmmeter,1NoAnalogVoltmeter1ni withPhasesele...
Supplying, fixingandSinglephasepreventerusingnecessarywiresoveranexistingpanelboardsuitableformotor up to 20HP capacities. (P.W.D. Electrical - 2022-23 Item No.5.3, Page No.10). ---- With all lead and...
Suplying,fixingandwiringheavydutylowvoltagecapacitorsconformingtoIS2834.3phase,400/440voltsgrade, for power factor improvement of roatingmachineries like inductionmotor.(P.W.D. Electrical-2022-23 Item...
Supplyof ISImark175mmnominal bore,plain and steel casingpipegradeof steel Fe410ofwall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistancewelded steel tubes, material and...
ProvidingandfixingMScasingcollarsasperIS1239(part-II)1982withall latestamendmentsifanyforanydia. Thethicknessofplateusedforcoveringoneendshallbe3mm(minimum).Thedimensionsofcapsandcolarsshall be strict...
ProvidingandfixingMScasingcollarsasperIS1239(part-II)1982withall latestamendmentsifanyforanydia. Thethicknessofplateusedforcoveringoneendshallbe3mm(minimum).Thedimensionsofcapsandcolarsshall be strict...
Supplying&fixingofPorcelainfusechannelwithcutoutonexistingwooden/panelusingnecessarynuts,boltsand washers. 32 Amps (P.W.D. Electrical - 2022-23 Item No.5.7.2, Page No.10) ---- With all lead and lift a...
Providing, LayingandFixingGI pipes conforming to IS1239:1990with latest amendments completewithGI fittings (excluding the cost of fittings)with cuts and threadswherever necessary, including testing fo...
LabourchargesforlayingandjointingGIpipeswithearthworkincludingfixingcollars,elbows, tees,bends,gland cocksandotherfittingswithcutsandthreads,whiteleadpaintswherevernecessary,conveyingthematerialsfrom ...
Supplyandfixingpolishedwoodboardmadeofnot less than15mmthickplankonbothsidesofnotmorethan2 pieces and fixing the same to thewall using tapered invertedwooden plugs screws. 20"x20"x2.5" (P.W.D. Electri...
Yield testing of borewells at final depth with a minimum of 10 hours continuously with the help of pump testing unit includingthecostof transportationcharges, crewchargesandcostofconsumables. (PWDWate...
ProvidingandfixingBrassfullwayvalvegatewithC.I.wheelofapprovedqualityscrewedend65mmnominal bore (PWD Vol-2 SR Pg-115, I-13.4.5) ---- With all lead and lift and as per the direction of Engineer In Char...
Providing and fixinggunmetal non-return valve of approved quality (screwed end) 50mmnominal bore Horizontal (PWD Vol-2 SR Pg-115 and 116, I-13.6.4.1) ---- With all lead and lift and as per the directi...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw1 NGO.docx
Tender Document • 0.21 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .