House Service Connection up to consumer premises from distribution pipe Line with MDPE pipes of required dia. and necessary accessories including supply, fitting and testing of Water Meter at Zone X Within MIDNAPORE Municipality under AMRUT

Providing Supply, Installation, Fittings, Fixing, Testing and Commissioning of House Water Supply Connections, with MDP.E. Pipe 20mm dia., & P.E. Compression EF fittings 20mm, Excavation, all short of Bituminous / Concrete Road Up to depth of D.I. Distribution Pipe line, Cuttings Fittings, Fixing, MDPE / P.E. pipe fittings up to Meter Box, inside/outside, to consumer premises average 12 mtrs, Including Full restoration if any damage of concrete road Under Ground Drainage line, Electrical lines, Tele phone lines other water supply line, Crossing drain line through PVC Conduit pipe Including Leakage Testing, supply of MDPE Pipes 20mm dia. PE 100, PN 16, 12 Mtrs. (Average), PE Both side Compression Elbow 90 deg. 2 nos. PE one side Compression other side SS insert F thread, Elbow 90 deg. 1 nos. P.E. Adopter with SS insert M/F Thread-Compression 2 nos. PE Compression Ball Valve 1 no. (execs quantity of fittings should be provided as per site condition) Ferrule, Gunmetal Confirming to IS 2692/1984 (reaffirmed 2005) 1 no. NRV 1no. P.E. Meter Box/ Cabinet with Common Lockable Key, Length 325mm, Width 245mm, Height 175mm. Suitable for Cover Meter, PVC Ball Valve, Back filling with Silver sand 100mm thik over Ferrule and balance depth with excavated earth up to Road Level and also remove surplus Earth from Road side, including fixing of meter as per direction of EIC. House Water Supply Connection Through 20mm dia. MDPE Pipes.

Supply, Delivery, unloading and proper staking at site of 15mm dia. Multijet type Water Meter 1 no. Must be AMR Computable, Class B, +/- 2%, IS 779 / ISO 4064, Admissible Pr. Max. 16 Kg/Cm² 360 0 Orientable, Cybal Coumputable, Magnetic transmission drive, Cooper can Mineral Glass 5mm Thik Envelop, Extra dry Dial, Totalizer, Protection Class IP 68, Strainer Inbuilt, MID Certification Marked, with Brass Nuts & Nipples. 15mm Dia. Water Meter Typical Performance. i)Starting flow :- ≤10 L/Hr. ii) Accuracy from +/- 5% :- 30 L/Hr. iii)Accuracy from +/- 2% :- 120 L/Hr. iv)Max. Flow +/- 2% :- 3000 L/Hr. Vendor list approved by P.H.E.Dte. Vide no. 20110-125/80/I/2011 Dated 02.12.2011 of C.E. (Mechanical-Electrical) & Chairman of vendor enlistment Committee P.H.E. Dte. (Execution as per direction of EIC).