Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹19.7 L
EMD Value
₹22,000
Closing Date
13 Sept 2023, 10:59 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Directorate of Municipal Administration
jyoti
Erection of streetlight poles and lines in taj nagar,unkal gram,achavvan colony,ambika nagar,ekta nagar,kalmeshwar nagar and various areas of ward 36 of hubballi division.
DMA/2023-24/EL/WORK_INDENT2782
DMA/2023-24/EL/WORK_INDENT2782
Reserved
Electrical
Electronic Documents, First(One Cover)
DMA City Corporation Hubballi-Dharawada
8 documents required · 8 mandatory
₹500
₹22,000
2 Sept 2023
2 Sept 2023
6 Sept 2023
Erection of streetlight poles and lines in taj nagar,unkal gram,achavvan colony,ambika nagar,ekta nagar,kalmeshwar nagar and various areas of ward 36 of hubballi division.
RCC Pole - 9 Mtr Long, 145 Kg WL
(Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as
Cross Arms (MS & GI) as per IS-1977 LT 2 Pin Cross Arm - MS
Clamps A Type (MS & GI) as per IS-1977 RCC Pole Clamp - MS
Insulator as per IS-1445 for Ceremic, IS-
7935 for GI Pin, IEC-61109 for Polymeric 1.1 KV Pin Insulator (Shell only)
Insulator as per IS-1445 for Ceremic, IS-
7935 for GI Pin, IEC-61109 for Polymeric No. 8 Strain Insulator
ACSR Conductor as per IS-398 (Part -
2/1996) Rabbit Conductor (6/3.35mm Al +1/3.35mm Steel).
Full Threaded Bolt & Nut as per IS-1367
Clamps A Type (MS & GI) as per IS-1977 Guy Clamp - MS (Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018)
Clamps A Type (MS & GI) as per IS-1977 Anchor Rod using 12 mm rounds/Guy Rod - MS
Turn Buckle (GI)
(Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018)
Guy Wire & GI Wire as per IS-2141 Guy Wire 7/10 SWG
Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth
Stringing of conductor rabbit ACSR, binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps
Digging of Pit for GUY SET Ordinary Soil.BESCOM SR 2021-22
Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT
Spiral Earth Electrode as per Bescom,Elct, Sr
LT 4 Pin Cross Arm - MS Bescom,Elct, SR
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip
thickness and resistivity as per IS-3975 16 Sqm...
Laying of cable in Existing Trench/GI pipe/Stoneware/RCC Hume pipe using wooden/Aluminium Rollers as directed by department staff. 2.5 to 25Sqmm
HDPE Pipe 40/33mm
Epoxy Terminating Kit (Pothead) suitable
for 1.1 kV, LTUG Cable
Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing.1.1.1 Ordinary Soil
GI Pipe B - Class as per IS-1239 GI Pipe - 20 mm Dia
Earth work Excavation for cable trenchof 0.5 to 0.75mtr width & depth up to 1mtr including trial pits,depositing on bank up to a lead of 50 mtr.Supplying & Displaying necessary danger boards & Lightin...
Fabricating, supplying and erection of . ms long hot dip
Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, ...
Single Arm Bracket with 1000 mm Standard 40/50 mm dia
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32 A PWD
Supply and fixing of 4pole power contactor with NO/NC
contacts on existing wood/panel board using necessary
bolts, nuts, washers and wiring etc., complete with AC-3
Rating and as per IS-13947. 40 A
Supplying and fixing Microprocessor based Electronic timer(without contactor, Din Mounting using necessary bolts, nutsand washers etc.,.) 3-120sec setting.
Fabricating supplying and mounting MS box made out
.SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wi...
Supplying and fixing hylum plastic sheet 3mm thick with
necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws.
Supplying & fixing miniature circuit breakers on existing
MCB distribution boards using necessary fixing materials
and 'C' Type curve, indicator ON/OFF, energy cross-3 withShort circuit breaking capac...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Supplying ,fitting and placing TMT Fe 550 Reinforcement in foundation complete as per drawing and technical specifications
Providing and laying in position Reinforced cement concrete for all foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
releasing of pole
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
2782.doc
Tender Document • 1.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .