SR of Superintendent Office Deputy Superintendent Visitor Room Waiting Room in District Jail Palwal in Palwal Distt.

Amount

Civil works

Finishing walls with textured exterior paint of required shade as per (DSR 13.45)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge) (HSR 16.3)

Fixed portion (Anodised aluminium transparent or dyed to required shade according to IS; 1868, minium anodic coating of grade AC 15) Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make confirming to IS; 733 and IS; 1285fixed with rawplugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides rust free straight mitred and jointed including cleat angle, aluminium snap beading for glazing/ panelling C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. (Glazing and panelling to be paid for separately). (HSR 17.95)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board confirming to IS; 12823 grade 1 type II in panelling fixed in aluminium doors. Windows shutters and partition frames with C.P. brass/ stainless steel screws etc. complete. (HSR 17.97)(b) Pre-laminated particle board with decorative lamination on both sides.

Supplying and fixing glass panes including special metal sash putty of approved make. (HSR 18.30)(b) Glass panes 4mm thick, exceeding 40sq dm areas.

Cost of aluminium fitting complte for doors and windows, such as tower bolts, handles, etc., and screws for these fittings (excluding sliding bolt). (HSR 17.72)(a) for single leaf shutter.

Terracing consisting of tiles 22.86cm x 11.43cm x 3.81cm, laid over 87.50mm mud filling on a layer of 25mm mud plaster and another layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 Kg per Sqm on top of R.C.C. slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc. (HSR 13.13)

Carpet (N.S)

Painting two coats excluding priming coat with ready-mixed paint for metallic surfaces in all shades on new steel or iron work. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). (HSR 16.17)

Providing & fixing poly carbonate sheet 1.25mm thickness on gates and grills excluding the cost of MS framework but including the cost of nut bolts, welding rods complete in all respect as per directions of Engineer-in -Charge as per (HSR 18.43)

Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position. (HSR 18.12)

Distempering with washable oil bound distemper (of approved manufacture) two coats excluding priming coat on new work. (HSR 16.57)

12mm thick cement plaster 1:6. (HSR 15.7)

Providing & Fixing false ceiling without grooves with 12mm to 15mm thick, 600 x 600mm best quality mineral fibre tiles of approved make fixed on M.S. steel runners frame i/c cost of screws angles, cleats, rawel plugs with taping and painting etc. complete in all respect as per approval of the Engineer-in-Charge of the work. (HSR 13.92)

Providing and fixing in postion best indian make (as approved by Engineer-in-charge) European type water closet suite, syphonic type consisting of Vitreous Chinaware syphonic suite with 15 litre capacity matching chinaware cistern and all internal brass fittings complete with 'P' or 'S' trap with or without vent (to the approval of the engineer-in-charge) & one piece seat lid in hollow black or white plastic fitted with chromium plated hings and rubber buffers, (to the approval of Engineer-in-charge as per (HSR 30.5)(a) White

Providing and fixing in position Indian make (Ordinary) Lavatory Suites Consisting of Lavatory in Vitreous China Ware size as given cutting and making good the walls floors and painting of fittings etc. (HSR 30.41) (a) White. (iii) Size 510 mm x 400 mm with one no. Tap.

Providing and fixing in position best Indian make bevelled edge 5.5mm thick mirror mounted on asbestos sheet ground and making good the walls etc. (As per item no 30.41) a) Indian make (I) 600mmx450mm (HSR 30.71)

Providing and fixing in position 15 mm I/d C.P. brass bib cocks of best quality (as required by the engineer I charge) (a) Bib cock long body (HSR 30.75)

Cement concrete 1 : 4 : 8 with stone aggregate 40mm Nominal size in foundation and plinth. (HSR 10.39)

Laying & fixing vitrified/ ceramic anti skid tiles of any size of approved make in floors lain in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. (Tiles shall be supplied by the Department). (HSR 14.93)

Distempering with washable oil bound distemper (of approved manufacture) two coats excluding priming coat on new work. (HSR 16.57)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge) (HSR 16.3)

Providing & laying 80mm thick interlocking paver blocks of all shapes and colours in design mix cement M-35 over a bed on 30mm thick fine sand complete in all respect. (HSR 10.159)

Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position. (HSR 18.12)

Yogesh Tewatia Contractor

Kamal Gulati Contractor

Analysis Construction Projects Pvt. Ltd.

The Bighot Co.op. L and C Societ Ltd.