Interior fitouts for the proposed office space of 3rd and 5th floor at SIDBI Office at Lucknow, Uttar Pradesh

(DSR, in Rs.) (MR in Rs.)

1 Civil Works 21,02,785.28 19,00,163.84

2 Modular Furniture 0.00 25,34,999.58

3 Electrical Works 17,30,204.00 17,05,151.08

4 Sanitary Fixture and fittings 0.00 2,71,892.07

5 Water Supply 97,053.35 0.00

6 Internal Drainage 0.00 1,04,589.00

7 IT WORKS 0.00 214872.00

8 Fire Alarm 3,47,562.00 90,078.00

9 HVAC Works 11,48,005.00 1,39,200.00

TOTAL COST OF WORK 54,25,609.63 69,60,945.58

GRAND TOTAL 1,23,86,555.21

GRAND TOTAL 1,23,86,555.21

MULTIPLYING FACTOR FOR 18 % GST 1.0633

Total Rs including 18 % GST 57,69,050.72 69,60,945.58

GRAND TOTAL Rs with GST 1,27,29,996.00

GRAND TOTAL Rs with GST 1,27,29,996.00

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

Interior Fit-Out work for the Office Space at 3rd and 5th Foor, SIDBI Office in Lucknow

DSR-2021 RATE (DSR AMOUNT MARKET AMOUNT

S.No. DESCRIPTION UNIT QTY

Ref. No. 2021) (DSR) RATE (NDSR)

CIVIL & INTERIOR WORKS

2 MASONRY AND PLASTER

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate) finished with a floating coat of neat cement, including cement slurry, but

2.1 11.3 excluding the cost of nosing of steps etc. complete.

40 mm thick with 20 mm nominal size stone aggregate

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level up to floor V level.

Cement mortar 1:4 (1 cement :4 coarse sand)

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third

2.3 6.15 course of half brick masonry. SQM 15.00 86.45 1296.75

CEMENT PLASTER :- 15 mm cement plaster on the rough side of single or half

2.4 13.2 brick wall of mix.

13.2.1 1:4 (1 cement : 4 fine sand) SQM 28.00 339.70 9511.6

2.5 13.4 12 mm cement plaster of mix

13.4.1 1:4 (1 cement: 4 coarse sand) SQM 15.00 307.25 4608.75

Reinforced cement concrete work in beams, suspended floors, roofs having

slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window

sills, staircases and spiral stair cases up to floor five level excluding the cost of

centering, shuttering, finishing and reinforcement, with 1:2:4 (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm

nominal size).

Centering and shuttering including strutting, propping etc. and removal of

2.7 5.9 form for :

2.8 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers SQM 5.00 608.35 3041.75

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

Steel reinforcement for R.C.C. work including straightening, cutting, bending,

placing in position and binding all complete above plinth level.

Hot rolled deformed bars

POP PUNNING (12mm-15mm) : Providing and fixing Average 12mm to

15mm thick POP Punning over cement plaster in line & plumb finished smooth

2.10 MR to receive paint. (Internal surfaces of walls). SQM 80.00 301.12 24089.6

Providing and laying water proofing treatment in sunken portion of WCs, bathroom

etc., by applying cement slurry mixed with water proofing cement compound

consisting of applying : a) First layer of slurry of cement @ 0.488 kg /sqm mixed

with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed

to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed

with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed

to air cure for 4 hours followed with water curing for 48 hours. The rate

2.11 22.5 includes preparation of surface, treatment and sealing of all joints, corners, SQM 25.00 516.60 12915

junctions of pipes and masonry with polymer mixed slurry.

FOAM CONCRETE FILLING UNDER TOILETS AND PANTRY:- Filling

andcompacting Foam Concrete for raising level of toilets and pantry and

finishing in a coat of lean concrete screeding with waterproofing compound

2.13 MR complete in all respects to take Tile Flooring as per flooring CUM 0.25 5,524.71 1381.1775

specifications.

3 PAVING AND WET WORKS

Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall

lining (veneer work), backing filled with a grout of average 12 mm thick in cement

mortar 1:3 (1 cement : 3 coarse sand), includingpointing with white cement mortar

1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the

3.1 8.10 marble shade (To be secured to the backing by means of cramps, which shall be

paid for separately).

8.1.1.2 Area of slab over 0.50 sqm SQM 25.00 4,998.10 124952.5

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

TILE DADO :- Providing and fixing Ist quality ceramic glazed wall tiles

conforming to IS: 15622 (thickness to be specified by the manufacturer), of

approved make, in all colours, shades except burgundy, bottle green, black of

any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados,

3.2 8.31 over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and SQM 135.00 1,063.45 143565.75

jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white

cement mixed with pigment of matching shade complete.

CERAMIC TILE FLOORING :- Providing and laying rectified Glazed Ceramic

floor tiles of size 300x300 mm or more (thickness to be specified by the

manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all

colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick

3.2 11.40 Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ SQM 20.00 1,225.10 24502

3.3 kg/ sqm including pointing the joints with white cement and matching pigments

etc., complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by

manufacturer), with water absorption less than 0.08 % and conforming to I.S.

15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12

3.3 11.46 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey

cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement &

matching pigments etc. complete.

11.46.4 Size of Tile 1000x1000 mm SQM 220.00 2,604.75 573045

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout

mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and

0.20 kg of resin per kg), including filling / grouting and finishing complete as

3.4 11.48 per direction of Engineer-in-charge.

11.48.4 Size of Tile 1000x1000 mm SQM 220.00 146.60 32252

Providing and fixing removable raised/false access flooring with system and its

components of approved make for different plenum height with possible height

adjustment upto 50 mm,comprising of modular load bearing floor panels

supported on G.I. rectangular stinger framework and

3.5 11.54 G.I. Pedestal etc. all complete, as per the architectural drawings, as specified

and asdirected by Engineer-in-charge consisting of:

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

(a) Providing at required spacing to form modular framework, pedestals made out

of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully

welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom

of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded

with GI fully threaded stud 16mm outer diameter with two GI Check nuts

screwed on the stud for level adjustment upto 50mm, locking and stabilizing the

pedestal head in position at the required level. The pedestals shall be fixed to the

subfloor (base) through base plate using epoxy based adhesive of approved make or

the machine screw with rawl

(b) Stringers system in all steel construction hot dipped galvanized of

rectangular size 570x20x30x0.80mm thick having holes at both ends for securing

the stringers on to the pedestal head using fully threaded screws ensuring maximum

lateral stability in all directions, the grid

formed by the pedestal and stringer assembly shall receive the floor panel, this

system shall provide adequate solid, rigid support for access floor panel, the

system shall provide a minimum clear uninterrupted clearance between the bottom

of the floor for electrical conduits and wiring etc. all complete as per the

architectural drawings, as specified and as directed by

the Engineer-in-charge

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade

Filled Steel anti static high pressure Lamination of 800H grade (FS800H).

Access Floor panel shall be steel welded construction with an enclosed bottom pan

with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel

Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64

welds in each dome and 20 welds along each flange). The panel should be

Corroresist epoxy coated for lifetime rust protection and cavity formed by the top

and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core

mixed with lightweight foaming compound. The access floor shall be factory

finished with Anti-static High Pressure laminate with Non Warp technology upto

1mm thickness for superior adhesion and Surface flatness within 0.75mm.The

panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x

25mm without collapse in the centre of the panel which is placed on four steel

blocks. The panel will withstand and Uniformly Distributed Load (UDL)

minimum 1250 kg/sqm and an impact load of 50kg all complete as per the

approved manufacturers specification and as per the direction of Engineer-in-

charge. All specification must be printed on the side of the panel to ensure the

quality of the product.

11.54.1 300 mm Finished Floor Height (FFH)

Supply of modular carpet of approved model and shade and made with 100% nylon

6/6.6 tufted textured tiles of minimum 500mm x 500mm in size, stain resistant, anti

microbial, and having colour fastness to water, fastness to light, rubbing fastness

and castor chair suitability as per relevant standard for heavy commercial

usage, with 100% PVC free Wellbac Function Backing with having average

density 6000 oz/cu. yd. or more,Nominal total thickness of 5.9mm, and Pile

weight – 16-18 oz/ sq yard. Material shall be CRI GREEN LABEL PLUS

3.6 MR certified, and shall have recycled content complying to GRIHA requirement, SQM 60.00 2,500.00 150000

including fixing with GRIHA compliant adhesive of approved make, minimum

15 years manufacturer's warrantee, all complete as per drawings, manufacturer's

specifications and direction of Engineer in Charge

TOTAL FOR PAVING & WET WORKS 150000

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

4 PARTITIONS AND WALL CLADDING

MR Providing and fixing 10mm thick toughened glass of approved make fixed in

plywood partition . The glass to be fixed with black powdered coated 2mm thick

aluminium concealed channel of size 20x30x2 mm at floor level and 20x50x2 mm

size at top level including suitable EPDM gasket including anodized 2mm thick

aluminium tube section of size 20x45x2 mm on all four sides of glazing with

4.1 mitred joints at corners jointed with suitable stainless steel screws, fixed to glazing SQM 9.20 6,200.26 57042.392

with appropriate adhesive including sealing of joints on floor and ceiling level with

non staining clear silicon sealant etc. all complete with material's of approved make

for all floor heights as per direction of engineer in charge

MR PANELLING- Panelling using 12mm thick, 120mins fire rated ply fixed on one

side on GI FRAME as per approved sample and architectural drawings. Aluminium

4.5 frame to be fixed to walls, floor and RCC Ceiling using fastners. SQM 181.50 2,463.55 447134.325

MR LAMINATE CLADDING- P/F 1mm thick laminate including 4 mm thick MDF,

4.8 on an existing Plywood surface. SQM 115.00 1,437.57 165320.55

12.62 INSULATION- Providing and fixing thermal insulation with Resin Bonded

rock wool conforming to IS: 8183, having density 48 kg/m3,50 mm

thick,wrapped in 200 G Virgin Polythene Bags fixed to wall wirh screw,

4.9 rawel plug & washers and held and in position by criss cossing GI wire etc. SQM 115.00 277.90 31958.5

complete as per directions of Engineer-in-Charge.

MR Providing and supplying Acoustical Wall Paneling with square edges made of fibre

glass substrate 9 mm thick and wrapped on the front side with an acoustically

transparent and classified for Fire reaction Class A as per ASTM E-84, fabric as

absorption level of 0.85 NRC to be affixed to wall using Wall panel impalers and

construction adhesives as per the instructions laid down by the manufacturer.

9.79 Providing and fixing special quality bright finished brass cupboard or ward robe

locks with four levers of approved quality including necessary screws etc.

4.15 complete.

9.79.4 75 mm each 4.00 333.15 1332.6

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

9.81 Providing and fixing bright finished brass handles with screws etc.

complete:

9.81.1 125 mm each 4.00 205.10 820.4

SUB TOTAL OF PARTITIONS AND WALL CLADDING 34,111.50 7,93,477.67

CEILING

300MM X 1200MM MINERAL FIBRE GRID - Providing and fixing of mineral

fiber ceiling tiles, with hot dipped galvanized steel grid work , surface chemically

cleaned capping pre-finished in baked polyester paint, Main Tees of size 38 (H) x

15 mm every 1.2M centre to centre, centre to centre to form a grid of size 1200 X

300 mm and suspending the grid from RCC roof using 3 mm GI rod, 6 mm nylon

rawl plug and 6mm J bolt at every 1200 mm intervals. And laying mineral fiber

Acoustic ceiling tiles MV B-Pin of size 1200 x 300 x 20 OCR mm over the formed

grid having fire rating of 60 minutes as per BS 47G / 23 of 1987. Light Reflection

5.2 MR of > 85%. Noise Reduction Coefficient (NRC) of 0.70, Sound Attenuation of 32 SQM 10.00 3,371.71 33717.1

db, K = 0.52-0.57 W/mk. Humidity Resistance up to 99% at 50’C. The grid to be

used is Silhoutte type as per approval of the architect

CEILING PELMETS :- Providing and fixed pelmet of overall size

150mmx150mm and made hardwood framings hung from ceiling @1000mm

centre to centre with 2 nos of 6mm thk. Commercial ply on vertical & 12mm thk.

5.5 MR Commercial ply on horizontal surface (straight & curved). Inclusive of RMT 65.00 1,022.47 66460.55

finishing in Paint.

SUB TOTAL OF CEILING 100177.65

6 DOORS/ WINDOWS

DOOR FRAMES- Providing wood work in frames of doors, windows,

clerestory windows and other frames, wrought framed and fixed in position with

hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or

6.2 9.1 dash fastener shall be paid for separately).

9.1.1 Second class teak wood CUM 0.22 131576.95 29078.50595

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

FLUSH DOOR:- Providing and fixing ISI marked flush door shutters

conforming to IS : 2202 (Part I) non-decorative type, core of block board

construction with frame of 1st class hard wood and well matched commercial

6.3 9.21 3 ply veneering with vertical grains or cross bands and face veneers on both faces

of shutters :

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary

screws SQM 8.00 2,015.75 16126

Extra for providing lipping with 2nd class teak wood battens 25 mm

minimum depth on all edges of flush door shutters (over all area of door shutter to

be measured)

Providing and fixing wooden moulded beading to door and window frames

with iron screws, plugs and priming coat on unexposed surface etc. complete:

9.40.1 2nd class teak wood

9.40.1.2 50 x 20 mm RMT 20.00 239.20 4784

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10

mm diameter bolts, nuts and wooden plugs and embedding in cement concrete

block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate

6.6 9.53 20mm nominal size). EACH 12.00 194.35 2332.2

DOOR CLOSERS:- Providing and fixing aluminium extruded section body

tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564,

embossed on the body, door weight upto 36 kg to 80 kg and door width from 701

6.8 9.84 mm to 1000 mm), with double speed adjustment with necessary accessories EACH 2.00 856.30 1712.6

and screws etc. complete.

MORTICE LOCK AND LEVER HANDLES- Providing and installing

Tubular Handle TH 123 with Roses & Escutcheon in SS packaged with

6.9 MR Mortice lockset 55mm backset, 20 SS forend, SS strike plate and EP Cylinder for EACH 2.00 3,415.03 6830.06

all flush doors.

TOWER BOLTS:- Providing and fixing aluminium tower bolts, ISI marked,

anodised (anodic AC 10 as per IS : 1868 ), transparent or dyed to required colour or

6.10 9.97 shade, complete:

9.97.2 250x10 mm EACH 2.00 104.40 208.8

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

9.82 DOOR STOPPER:- Providing and fixing bright finished brass hanging type

6.11 floor door stopper with necessary screws, etc. complete. EACH 2.00 109.60 219.2

SUB TOTAL OF DOORS 55264.10595 6830.06

7 FINISHES & MISCELLANEOUS

PRIMER: Applying one coat of water thinnable cement primer of approved brand

and manufacture on wall surface. Water thinnable cement primer.

Providing and fixing factory made uPVC white colour sliding glazed door

comprising of uPVC multi-chambered frame with in-built roller track and sash

extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel

section made from roll forming process of required length(shape & size according

to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC

extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM

gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of

extreme panels along with zinc plated mild steel multi point locking having

transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if

equired), stainless steel (SS 304 grade) body with adjustable double nylon rollers

(weight bearing capacity to be 120 kg), G.I fasteners 100 x8 mm size for fixing

frame to finished wall and necessary stainless steel screws etc. Profile of frame &

sash shall be mitred cut and fusion welded at all corners, including drilling of holes

for fixing hardware's and drainage of water etc. After fixing frame the gap between

frame and adjacent finished wall shall be filled with weather proof silicon

sealentover backer rod of required size and of approved quality, all complete as per

approved drawing & direction of Engineer-in-Charge. (Single / doubleglass panes,

wire mesh and silicon sealent shall be paid separately). Variation in profile

dimension in higher side shall be accepted but no extra payment on this account

shall be made.

Two track two panels sliding door made of (big series) frame 67 x 50 mm & sash

46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /

double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto

ACRYLIC EMULSION PAINT: Painting of wall, ceiling, POP/ plastered,

Gyspum etc. surfaces with smooth and even finish velvet touch paint of approved

7.2 MR brand and manufacture to give an even shade. Two or more coats on new work SQM 146.00 234.79 34279.34

complete to the satisfaction of the Engineer- in -charges complete with the

preparation of the base etc.

Providing & fixing imported decorative Poly décor fabric Wall Paper (on walls

and ceiling) of weight 475 g /sqm as per approved shade & design including

7.3 MR SQM 5.00 4,520.81 22604.05

prepration of surface with 2 coats of Nubin Glue basede poxy quote.

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

Preparation of complete set of shop drawings including finishing, MEP

services, details, design calcualtions etc. and any other details as and when

7.4 MR desired by Engineer In charge /client. A qualified professsional for the Lot 1.00 250000 250000

purpose shall be appointed after due appproval from Engineer In Charge.

Dismantling of existing workstation, flooring, ceiling, partitions, doors,

windows, plumbing, pipes and any other fixture installed at site complete in all

respect including cleaning and clearing the site. Disposal of the material at

7.5 MR appropiate location as per the guidelines of local authority. Stacking of scrapped Lot 1.00 150000 150000

material at suitable place as per direction of engineer in charge for buy back/

auction

Providing and installtion of Wall art of embossed on Corian, backlit and fixed on

7.6 NS the wall with wooden border framing polished to match the shade and color of sqm 3.00 13500.00 40500

panel.

ROLLER BLINDS - Providing and fixing of Roller Blind of sturdy aluminium top

tube of 38mm diameter, powder coated bottom bar, with suitable roller clutch

mechanism and plastic ball chain. The Roller Blind fabric should possess the below

mentioned specifications with fabric made up of 85% Polyester and 15% Catonic

Polyester. Roller blinds with Solar protection fabric of high

tenacity Polyester Yarn & Fungi static Treatment and should block the light flux &

offer elimination of glare and sunlight / heat radiance. Fabric shall have visible

light & solar properties. 1st weave of thickness 0.32mm ±5% (ISO 2286-2) and

weighing 210g/sm±5%. Flame Retardancy as per AS301.3- 1999. Fabric

Protected by teflon fabric protector for water and stain resitance. Harmful

substance standard Oeko-tex standard 100. Constrruction of fabric 16.5+1_

Warp and end/cm 17.5+_1 (fill). Aluminium profile should have temper WP

consisting of alloy 63400 along with anodizing of 10 micron and powder

7.7 MR coating of 60 micron. The tensile strenghth of profile should be 9.10 Kg/mm SQM 130.00 1,730.25 224932.5

square and elongation 18.The control clutch drive unit engineered heavy duty

chain drive pulley operating system consisting of gear clutch housing and

locking plug containing minimum 6 ribs and inserted at minimum of 38mm into

roller tube. It is self-lubricating Exclusive clutch with safety pins for secure bracket

installation and unlocking pin for quick manual removal. Universal clutch is most

convenient for large windows down to the smallest windows. It shall be driven by a

ball chain pulley with ball chain and can be positioned at Right hand or Left hand

side of the shade. Clutch gear ratio of 1.75:1 for reduced operating force on larger

blinds.. Mounting hardware brackets universal brackets including end plug

bracket with lock down retainer device. Brackets finish of powder coated metal

installation brackets made of stamped and hardened steel. Roller tube circular-

shaped aluminium tube extruded from alloy 63400 and temper WP. Bottom rail flat-

shaped extruded aluminium from alloy 63400 and temper WP. Ball chain shall be

FROSTEDFILM(CRYSTALQUALITY):-Providing and fixing scotchcal over

7.8 M.R. glass surface with 15 yrs MCS warranty as approval of the Engineer-in charge SQM 20.00 2,094.59 41891.8

(Only film surface area shall be measured and paid).

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

GLASS PARTITION:- Providing & Fixing Full Height Glass partition using

7.9 M.R. SQM 8.00 7500.00 60000

12mm Thk. Toughned Glass including framing and fitting complete in all respect

SUB TOTAL OF FINISHES

Total Civil Amount 21,02,785.28 19,00,163.84

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

BOQ FOR PLUMBING

SUB HEAD A: SANITARY FIXTURES & FITTINGS

DSR - DESCRIPTION OF ITEMS UNIT Qty DSR Rate NS Rate (Rs.) DSR Amount NS Amount (Rs)

Providing & fixing glazed vitreous china single trap syphonic pattern

having back inlet ,supporting chair ,wall hung water closet with

cistern complete with all internal fittings/accessories and CP

brass flush bend (European type) water closet with seat and lid, with

1.1 NS C.P. brass hinges and rubber buffers, adapter, rubber joints fixed

to W.C., C.P. brass screwed washers including cutting and making

good the walls and floors wherever required and HDPE wc pan

connector including jointing with white cement coomplete in all

respects

Wall hung W.C. pan (White colour)with white plastic seat &

lid "Thermoset moulded ( bakelite ) IS 2548 Part I

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 2 23,196.82 46393.64

Providing & fixing glazed vitreous china wash basin with R.S. or C.I.

brackets painted white, 32mm C.P. brass waste of standard pattern ,

1.3 NS C.P brass wall flange 32 mm dia. C.P. brass bottle trap and union 32

mm dia C.P. pipes to wall flange. complete including cutting and

making good the walls wherever required.

1.3.1 Undercounter wash basin (White colour)of size: 585x430 mm

For supply,installation,testing & commissioning of sanitary

fixtures as per above details.

1.3.2 NS Table top wash basin (white colour)of size: 440x440 mm

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 9,998.50 9998.5

Providing & fixing 15mm C.P. brass single hole wash basin

1.4 NS mixer without popup waste system with 450mm long copper pipes

and brass nut

For supply,installation,testing & commissioning of sanitary

fixtures as per above details.

1.5 NS Providing & fixing vitreous chinaware urinal comprising

Large flat back wall hung urinal in glazed vitreous China

new magnum urinal

15 mm electrically operated solenoid valve with infra red

sensor mounted in a box with SS Cover.

CP brass chromium plated flush piping from solenoid valve to urinal

terminated with a 15 mm screwed spreader

32 mm nominal bore CP cast brass waste

32 mm nominal bore CP cast bottle trap with extension pipe rubber

adopter for waste connection, CP brass wall flange.

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

For supply,installation,testing & commissioning of sanitary

fixtures(white colour) as per above details.

Providing & fixing toilet paper holding including cutting and

1.8 NS making good the walls.

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 4 1,993.65 7974.6

Providing & fixing Horizontal liquid soap dispenser with stainless

1.9 NS steel lid and brackets fixed to wooden cleats with

C.P. brass screws.

For supply,installation,testing & commissioning of sanitary

fixtures as per above details.

Providing & fixing C.P. brass coat hooks fixed on toilet door

1.10 NS with C.P. brass screws

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 4 605.14 2420.56

Providing & fixing beveled edge mirror 5.5mm thick of superior

quality plate glass complete with 6mm thick marine ply sheet

1.11 NS ground fixed to wooden cleats with CP brass screws and

washerswith 40 mm wide teak wood frame as

per design including polishing

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Sqm 3 2,488.44 7963.008

Providing & fixing Hand Shower (Health Faucet) with 8mm dia, 1M

1.12 NS long PVC tube and wall hook CP brass wall flange

For supply of sanitary fixtures as per above details Each 2 1,730.53 3461.06

Providing & fixing, testing and commissioning of storage type

electric water heater with automatic thermostatic control electric

element, pressure release valve, brackets fixed to expansion

fasteners with M.S. nuts and bolts all complete including cutting

and making good the walls

wherever required.

25 litres capacity (Horizontal /Vertical type1.5 kw electrical

For supply,installation,testing & commissioning of sanitary

fixtures as per above details.

Providing & fixing wall mounted 25 mm dia Stainless steel coated

1.15 NS grab bar including cutting & making good the

walls(size 450mm long)

For supply,installation,testing & commissioning of sanitary

fixtures as per above details.

Providing & fixing 15 mm dia C.P. brass bib cock with Hose

union of approved quality.

For supply,installation,testing & commissioning of sanitary

fixtures as per above details.

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

Providing & fixing 15 mm dia C.P. brass bib cock with C.P.

wall flange of approved quality.

For supply,installation,testing & commissioning of sanitary

fixtures as per above details.

FRAGRANCE DISPENSER MACHINE :-Providing and fixing of Fragrance

Dispenser machine complete with refill can and 'C' size battery (2

1.18 NS Nos) for operation fixed to wooden cleats

with CP brass screws

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 2 4,535.84 9071.68

Providing and fixing of stainless steel finish Paper Towel

1.19 NS Dispenser having capacity of 300-350 paper towels fixed to wooden

cleats with C.P. brass screws

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 4 5,501.39 22005.56

Detail of Sanitary fixture are for the information of the

Contractor,however model/makes of all sanitary fixtures shall be

same shall be binding for execution.

No additional fixing cost shall be paid for change in type of

sanitary fixtures.

Contractor to receive all the above mentioned items &

store at place as directed at site.

TOTAL CARRIED OVER TO SUMMARY

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

SUB HEAD B: WATER SUPPLY

SL. DSR - 2021/NS DSR Rate (Rs.) NS Rate (Rs.) DSR NS

NO. DESCRIPTION OF ITEMS UNIT Qty Amount (Rs) Amount (Rs)

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability

for hot & cold water supply including all (CPVC) plain & brass threaded fittings including

fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings

1 18.7 with one step CPVC solvent cement and testing of joints complete as per direction of

engineer in charge. .

Internal Work - Exposed on Wall

18.7.2 20 mm nominal outer dia pipes. Metre 40.00 325.10 13004.00

18.7.3 25 mm nominal outer dia pipes. Metre 25.00 408.55 10213.75

18.7.4 32 mm nominal outer dia pipes. Metre 20.00 500.95 10019.00

18.7.5 40 mm nominal outer dia pipes. Metre 15.00 674.35 10115.25

18.7.6 50 mm nominal outer dia pipes. Metre 15.00 927.00 13905.00

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability

for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the

2 18.8 pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step

CPVC solvent cement and the cost of cutting chases and making good the the same

including testing of joints complete as per direction of engineer in charge.

Concealed work oncluding cutting chases and making good the

walls etc.

18.8.2 20 mm nominal outer dia pipes. Metre 60.00 513.75 30825.00

18.16 Providing and fixing brass stop cock of approved quality

complete.

18.16.1 15 mm nominal bore Each 3.00 303.85 911.55

18.16.2 20 mm nominal bore Each 6.00 327.95 1967.70

18.17 Providing and fixing gun metal gate valve with C.I. wheel of

approved quality (screwed end):

18.17.1 25 mm nominal bore Each 2.00 532.35 1064.70

18.17.2 32 mm nominal bore Each 2.00 589.90 1179.80

18.17.3 40 mm nominal bore Each 2.00 707.30 1414.60

Providing and fixing C.P. bass angle valve for basin mixer and

5 18.53 geyser points of approved quality conforming to I.S:8931 a) 15 mm nominal bore.

18.53.1 15 mm nominal bore Each 4.00 500.35 2001.40

Providing and fixing unplasticised P.V.C connection pipe with PTMT Nuts coller and

6 18.74 bush of approved quality and colour.

18.74.2 15mm nominal bore with 45cm length Each 4.00 107.90 431.60

Sub-Total of Water Supply Installation, Separate for Scheduled & Non-Scheduled Items 97053.35

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

SL. DSR - DSR NS Rate DSR Amount

NO. 2021/NS DESCRIPTION OF ITEMS UNIT Qty Rate (Rs.) (Rs) NS Amount (Rs)

Providing, fixing, jointing and testing in position of ISI marked UV stabilized

UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for

rubber ring joints, including all neccessary specials and fittings (confirming to

IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC

connectors, couplers, expansion joints / bellows, cowels, clamps, rubber

rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp &

hangers etc. in concealed / inside duct / under floor & basement ceiling /

external work etc. including chase cutting as required, excavation and back

MR 20 filling in all kind of soils, suspended from floor under false ceiling or

embedding the pipes laid under floors / building in 75 mm. alround 1:2:4

cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) including cost of shuttering for proper completion of the

work, breaking and making good the walls and floors etc. after pipes have

been duly laid and tested. The rubber ring shall confirm to IS:5382.

The Pipes will be supported with threaded G I rods & U clamps with nuts,

washers etc on 50x50x5 mm slotted angle. The cost will include all support

arrangements. The work includes commissioning of all pipes lines as per

drawings and specifications and as directed by engg- in-charge at site.

a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METR 60.00 536.00 53600.00

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METR 25.00 416.00 8320.00

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC E

pipes of min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures

to floor trap including reduces, enlarger, socket, couplers, bends, tees etc

M including fixing at wall/ ceiling level supported by clamp & hangers etc.

R cutting holes in wall/ floors/ slabs and making good the same with

cement concrete 1:2:4 complete as required.

32 mm dia. METR 15.00 129.00 1935.00

Providing & fixing UPVC Floor trap of self cleansing design with E

M stainless steel grating

R complete inTrap

all respects.

Plain Floor (4" Ht) with 50 / 75 outlet and with height raiser EACH 9 536.00 9648.00

MR 23 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating EACH 6 726.00

over floor traps.

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

MR 24 Providing & fixing of SS Floor Cleanout, round or square with rubber EACH 5 1001.00

seal and flat round cover with screws and other required fitting complete as 18018.00

required.

Sub-Total of Drainage Installation, Separate for Scheduled & Non-Scheduled Items

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

S DSR NO DESCRIPTION QUANTIT TOTAL TOTAL

UNIT RATE

NO 2022 Y AMOUNT

DSR (INR) AMOUNT

NON-DSR

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm

FRLS PVC insulated copper conductor single core cable in surface / recessed

medium class PVC conduit, with modular switch, modular plate, suitable GI

1 1.10 box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor

single core cable etc as required.

1.10.3 Group C Point 38 1467.00 55746.00

Wiring for group controlled (looped) light point/ fan point/call bell point

(without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper

2 1.55 conductor single core cable in surface / recessed PVC conduit, and earthing the

point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as

required.

1.55.3 Group C Point 70 858.00 60060.00

Wiring for light/ power plug with 2x4 sq mm FRLS PVC insulated copper conductor

3 1.12 single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. Metre 150 334.00 50100.00

mm FRLS PVC

insulated

Wiring forcopper conductor

light/ power plugsingle coresq

with 4x4 cable

mm for loopPVC

FRLS earthing as required.

insulated copper conductor

single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos 4

4 1.13 sq. mm FRLS PVC Metre 50 537.00 26850.00

insulated copper conductor single core cable for loop earthing as required.

5 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate

& switch box including connections but excluding modular plate etc. as required.

1.24.1 5/6 amps switch Each 50 103.00 5150.00

1.24.3 15/16 amp switch Each 30 156.00 4680.00

1.24.4 3 pin 5/6 amp socket outlet Each 80 122.00 9760.00

1.24.5 6 pin 15/16 amp socket outlet Each 30 197.00 5910.00

1.24.8 Bell Push Each 8 140.00 1120.00

6 1.26 Supplying and fixing modular blanking plate on the existing modular plate &

switch box excluding modular plate as required. Each 50 40.00 2000.00

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

7 1.27 Supplying and fixing following size/module, GI box along with Modular base & cover

plate on existing modular metal boxes etc. as required.

1.27.2 3 Module Each 35 327.00 11445.00

1.27.5 8 Module Each 40 454.00 18160.00

1.27.6 12 Module Each 15 547.00 8205.00

B SUBMAIN AND CONTROL WIRING

1 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following

sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed

steel conduit as required

1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 525 233.00 122325.00

1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 1210 275.00 332750.00

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 750 334.00 250500.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 150 439.00 65850.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 50 1005.00 50250.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 100 1365.00 136500.00

C CABLES

Supplying and making end termination with brass compression gland and aluminium

1 9.1 lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium

conductor cable of 1.1 KV grade as required.

9.1.21 3½ X 35 sq. mm (32mm) Each 6 369.00 2214.00

LT CABLES

MR Supply of following XPLE armourned 1.1 KV grade conforming to

2 I.S.7098/1554Aluminium Conductor Cables :

Supply of following sizes of PVC sheathed PVC/XLPE insulated

Aluminium conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1

/ IS:1554 part-1 respectively & ISI marked.

(d) 3.5 C x 50 Sqmm XLPE cable Metre 10 403.00 4030.00

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve,

miniature circuit breaker suitable for inductive load of following poles in the

1 2.10 existing MCB DB complete with

connections, testing and commissioning etc. as required.

2.10.1 Single pole Each 60 256.00 15360.00

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts,

residual current circuit breaker (RCCB), having a sensitivity current 30 mA in

2.15 the existing MCB DB complete with connections, testing and commissioning etc. as

required.

2.15.3 63 amps Each 6 2872.00 17232.00

Supplying and fixing following way, vertical type three pole and neutral, sheet

steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned

copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder

2 2.5 painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

2.5.2 8 way (4 + 24), Double door Each 2 10165.00 20330.00

2.5.3 12 way (4 + 36), Double door Each 2 12833.00 25666.00

Supplying and fixing following rating, double pole, (single phase and neutral),

240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto

300 milliamperes in the existing MCB DB complete with connections, testing and

commissioning etc. as required.

2.14.1 25 amps Each 10 2028.00 20280.00

2.14.2 40 amps Each 8 2642.00 21136.00

2.14.3 63 amps Each 6 2722.00 16332.00

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

MR Supply, installation, testing & Commissioning of 1 module 16A SWITCH SP 1 way Set 45 46.05

1 for floor box. 2072.25

MR Supply, Installation, Testing and Commissioning of USB port Socket in single module Each 8 715.49

MR Supply, installation, testing & Commissioning of 2 module 16 A Socket for floor box Set 2 371.29

1.24 Supplying and fixing following modular switch / socket on the existing modular plate

4 & switch box including connections but excluding modular plate etc. as required.

1.24.7 TV socket outlet Set 5 148.00 740.00

1.24.6 Telephone Socket Outlet Set 30 148.00 4440.00

Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper

1.18 conductor, unarmoured telephone cable in the existing surface / recessed steel /

PVC conduit as required.

1.18.2 2 pair Meter 199 38.00 7562.00

MR 20 Pair Metre 50 82.03 4101.50

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

MR 50 pair Metre 50 166.94 8347.00

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways

along with required suitable number of GI couplers for joining raceways and

fixing GI brackets and all accessories complete in all respect as per the directions of

engineer in charge

(a) 300mmx38mm(GI) - 3 compartment Metre 298 1279.38 381255.24

(b) 225mmx38mm(GI) - 3 compartment Metre 205 1027.52 210641.60

(c ) 150mmx38mm(GI) Metre 119 646.47 76929.93

(d) 100mmx38mm(GI) Metre 75 460.29 34521.75

(e) 75mmx38mm(GI) Metre 85 364.76 31004.60

(f) 50mmx38mm(GI) Metre 50 250.74 12537.00

MR Supply, Installation, Testing and Commisioning of Junction boxes for direct access to

cables at the intersection of raceways supplied completely with base and cover

plates, height adjustable junction box 65- 90 mm including all accessories complete

in all respect as per the directions of engineer in charge

(a) 300x 300 x 65-90 mm Each 15 814.20 12213.00

(b) 225x 225x 65-90 mm Each 15 610.65 9159.75

(c ) 150x 150 x 65-90 mm Each 10 407.10 4071.00

Supplying and fixing of following sizes medium class PVC conduit aong with

accessories in surface/ recess including cutting the wall and making good the

same incase of recessed

8 conduit as required

1.21.2 25mm Metre 925 145.00 134125.00

4.1 Supplying and Installation of following size perforated of painting with powder

coating M.S. cable trays of perforation of not more than 17.5% in convinient

sections, joined with connectors suspended from the cieleing with MS suspenders

9 including bolts and nuts painting suspenders etc as required

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 100 1137.00 113700.00

EARTHING

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including

accessories, and providing masonry enclosure with cover plate having locking

1 5.6 arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as Set 2 13838.00 27676.00

required.

5.14 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for Metre 50 1162.00

2 connections etc. as required. 58100.00

5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections Metre 75 244.00

3 etc. as required. 18300.00

5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as Metre 125 70.00

4 required. 8750.00

Installation of exhaust fan in the existing opening, including making good the Each 2 450.00

damage, connection, testing, commissioning etc. as required. Upto 450mm sweep

Modular pendant luminaire Slash S with HPE (High Performance Efficiency) LED

(Light Emitting Diode) maximum system power: 22 W/4 Feet, minimum Luminous

flux of luminaire2420 lm, Colour temperature of 4000 K, neutral white, CRI > 80,

THD upto 5% , SDCM upto 3 , R9>0 230 V constant current driver, 70% of luminous

6 MR flux after 50,000 operating hours, Energy efficient LEDs, Direct light emission, Nos. 50 3500 175000.00

Luminaire profile in anodised aluminium, prismatic diffuser for a homogenous light

distribution, ZHLS ( ZERO HALOGEN LOW SMOKE) internal wiring, Electronic

control gear, Sliding fixing wire suspension, Protection class I, IP 40, L = 1175 mm ,

Modular pendant luminaire Slash S with HPE (High Performance Efficiency) LED

(Light Emitting Diode) maximum system power: 14 W/4 Feet, ,minimum Luminous

flux of luminaire1540 lm, Colour temperature of 4000 K, neutralwhite, CRI > 80, ,

THD<5% , SDCM <3 , R9>0 230 V constant current driver, 70% of luminous flux

7 MR after 50,000 operating hours, Energy efficient LEDs, Direct light emission, Luminaire Set 18 6500 - 117000.00

profile in anodised aluminium, prismatic diffuser for a homogenous light distribution,

ZHLS ( ZERO HALOGEN LOW SMOKE) internal wiring, Electronic control gear,

Sliding fixing wire suspension, Protection class I, IP 40, L = 2X1175 mm , B = 52

mm, H = 64 mm, PL= 1500 mm. (OVERLAPPING PLUS-DESIGN)

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

Pendant luminaire Ring with HPE (High Performance Efficiency) LED (Light

Emitting Diode) system power: 30 W, Luminous flux of luminaire 3000 lm,Colour

temperature of 4000 K, neutral white, CRI > 80, , THD<5% , SDCM <3 , R9>0 230 V

constant current driver, 70% of luminous flux after 50,000 operating hours; Energy

8 MR efficient LEDs, Direct light emission, Luminaire profile in aluminium, Polyester Nos. 10 17000 - 170000.00

powder black coloured coat applied over a 5- stage pre-treatment, Prismatic diffuser

for a homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE)

internal wiring, Electronic control gear, Protection class I, IP20, Ø = 600 mm, W =

Pendant luminaire Slash Y with HE-High Efficiency LED (Light Emitting Diode)

maximum system power: 3x14 W, minimum luminous flux of luminaire 4620 lm,

colour temperature of 4000 K, neutral white, CRI >80, , THD<5% , SDCM <3 , R9>0

230V constant current driver, 70% of luminous flux after 50,000 operating hours,

energy-efficient LEDs with high CRI, direct light emission, luminaire profile in

9 MR Set 6 10000 - 60000.00

aluminium, powder-coated black, pre-wired batten, opal APD (Added Performance

Diffuser) diffuser for homogenous light distribution, ZHLS (ZERO HALOGEN LOW

SMOKE) internal wiring, integral Electronic control gear, sliding fixing wire

suspension, Protection class I, IP20, L1 = 1189 mm, L2 = 1189 mm, L3 = 1189 mm,

B = 48 mm H = 70 mm PL max = 1500 mm (Y-DESIGN)

Surface Mounted luminaire Tube with HPE (High-Performance Efficiency) LED

(Light Emitting Diode) maximum system power: 20 W, minimum Luminous flux of

luminaire 2000 lm, Colour temperature of 4000 K, neutral white, CRI > 80, SDCM

<3 , R9>0 230 V constant current driver, 70% of luminous flux after 50,000

10 MR operating hours, Energy-efficient LEDs, Direct light emission, Luminaire profile in Nos. 18 600 - 10800.00

aluminium, Polyester powder white coloured coat applied over a 5- stage pre-

treatment, snap-fit satin diffuser for homogenous light distribution, ZHLS (ZERO

HALOGEN LOW SMOKE) internal wiring, Electronic control gear, Protection class

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

COB based pendant downlight luminaire Rea 100 with maximum system power: 15

W, minimum Luminous flux of luminaire 1500 lm, Colour temperature of 4000 K,

neutral white, SDCM 3, CRI > 80, , SDCM <3 , R9>0 230 V constant current driver,

70% of luminous flux after 50,000 operating hours; Energy efficient LEDs, Direct

11 MR light emission, Luminaire housing in aluminium, Polyester powder black coloured Nos. 150 2500 - 375000.00

coat applied over a 5- stage pre-treatment, Clear acrylic with reflector and a beam

angle of 60°, ZHLS (ZERO HALOGEN LOW SMOKE) internal wiring, Electronic

control gear,Protection class II, IP 20,

Total of Electrical items 3435355.08

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

IT WORKS

S.No. Description UOM Qty Rate Amount

A. UTP Components for Data

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper

conductors for Connectivity of Hub room to End Point.High Speed

Gigabit Ethernet U/UTP, 250 MHz, Class E, 23 AWG, Unshielded

LSZH Cable, C6

Supply , Installtion , Testing and Comissioning of I/O port for CAT6

2 cable termination at Work Station end. Keystone Unshielded Outlet, Nos. 32 240.00 7680.00

Supply , Installtion , Testing and Comissioning of I/O port for CAT6

3 cable termination at Work Station end Redantant . Keystone Unshielded Nos. 22 240.00 5280.00

Outlet, 180DG C6

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2

4 Mtr (7 feet) for information outlet (I/O) to end user device Nos. 50 275.00 13750.00

connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord, LSZH, C6

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 1

5 Mtr (3 feet) for information outlet (I/O) to Rack End Redantant device Nos. 50 235.00 11750.00

connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord, LSZH, C6

Supply , Installtion , Testing and Comissioning of 24 port Loaded Jack

Panel for CAT6 cable termination at rack end. Data Active

Supply , Installtion , Testing and Comissioning of 24 port Loaded Jack

Panel for CAT6 cable termination at rack end. Data Active Redandant

B. Voice 0.00

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper

conductors for Connectivity of Hub room to End Point.High Speed

Gigabit Ethernet U/UTP, 250 MHz, Class E, 23 AWG, Unshielded

LSZH Cable, C6

Supply , Installtion , Testing and Comissioning of I/O port for CAT6

9 cable termination at Work Station end. Keystone Unshielded Outlet, Nos. 26 240.00 6240.00

Supply , Installtion , Testing and Comissioning of 24 port Loaded

10 Angled Staggred Jack Panel for CAT6 cable termination at rack end. Nos. 1 8000.00 8000.00

Voice Active

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 1

11 Mtr (3 feet) for information outlet (I/O) to end user device connectivity. Nos. 26 235.00 6110.00

(Rack end), High Speed Gigabit 26AWG Patch Cord, LSZH, C6

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2

12 Mtr (7 feet) for information outlet (I/O) to end user device Nos. 26 275.00 7150.00

connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord, LSZH, C6

Supply , Installtion , Testing and Comissioning of 4 Port British Style

Shuttered Face Plate white for I/O fixing at user side

Supply , Installtion , Testing and Comissioning of 24 port Loaded

14 Angled Staggred Jack Panel for CAT6 cable termination at rack end. Nos. 1 8000.00 8000.00

Riser Active

TOTAL 214872.00

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

SCHEDULE OF QUANTITIES - FIRE ALARM

TOTAL TOTAL

DSR AMOUNT AMOUNT

S NO DESCRIPTION UNIT QTY. RATE

DSR (INR) NON-DSR (INR)

17.2.4 1 Supplying, installation, testing & commissioning of intelligent analog No 40 2858.00 114320.00

addressable photothermal detector complete with mounting base complete as required.

17.2.5 2 Supplying, installation, testing & commissioning of response indicator on No 10 276.00 2760.00

surface/recessed MS Box having two LED, metallic cover complete with all

connections etc as required.

17.2.9 3 Supplying, installation, testing & commissioning of intelligent addressable thermal No 4 2726.00 10904.00

detector with rate of rise cum fixed tempreature thermistor complete with base as

required.

17.2.7 4 Supplying, installation, testing & commissioning of fault isolator complete with No 4 3270.00 13080.00

base as required.

17.2.10 5 Supplying, installation, testing & commissioning of addressable fire control module No 4 3003.00 12012.00

complete as required

17.2.13 6 Supplying, installation, testing & commissioning of intelligent addressable duct No 2 7814.00 15628.00

detector including suitable Photo detector complete with base as required.

17.2.15 7 Supplying, installation, testing & commissioning of addressable horn cum strobe No 4 3506.00 14024.00

complete as required.

17.2.14 8 Supplying, installation, testing & commissioning of addressable manual call point No 4 3871.00 15484.00

complete as required.

17.3.2 9 Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker NOS 10 965.00 9650.00

complete as required.

MR 10 Supplying, installation, testing & commissioning of digital audio amplifier 150 Watt, NOS 1 74598.00 74598.00

25V rms operating at 240 Volt AC Supply complete as required.

11 Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with 500 173.00 86500.00

17.5.2 annealed copper conductor having XLPE insulation, steel wire armouring & Mtr.

FRLS outer sheath complete as required

12 Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable

17.5.3 in the existing surface / recessed steel conduit of following pairs, cores and

size including connections and interconnections etc. as required.

17.5.3.2 13 speaker cable Two pair, 2-core, 1.5 sqmm Mtr 300 89.00 26700.00

17.5.4 14 Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all Metre 500 53.00 26500.00

ancillaries and accessories like coupler etc. as required.

M.R. 15 Supplying & Fixing of battery operated illiminated "EXIT" signage, with 2hrs NOS 4 3870.00

power Battery backup complete as required.

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

TOTAL FIRE ALARM WORKS 347562.00 90078.00

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

S.No. DESCRIPTION UNIT QTY AMOUNT

INR INR

EQUIPMENT

VARIABLE REFRIGERANT FLOW SYSTEM

Supply Installation, Testing & Commissioning of modular type Variable

Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable

for cooling and heating, having all hermetically sealed inverter type Scroll

Compressor(s), minimum two compressors for above 14 HP modules,

microprocessor based Controller, top discharge type condensing unit(s), with R

410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as

required. The unit shall deliver the rated capacity at AHRI Conditions and work

even at 50°C ambient temperature without tripping. The unit shall be suitable to

work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled

with first charge of the refrigerant and ready for use as required. The COP at

AHRI conditions shall not be less than 3.1 and IEER not less than 6.5

A. OUT DOOR UNITS

26 HP - Heating & Cooling Nos 26 16,415 4,26,790

B. INDOOR UNITS

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

Supply, installation, testing and commissioning of following minimum capacity 4-

way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with

synthetic washable media pre-filter, fan section with low noise fan/dynamically

balanced blower, multispeed motor, coil section with DX Copper coil, electronic

expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration

isolation, cord less remote control etc., suitable for operation on single phase

230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have

automatic force shut down provision in case of fire on receiving signal from BMS

System. The cooling capacity of indoor unit will be at air inlet conditions of 27

Degree C DB and 19 Degree C WB temperature.

0.8 TR Nos 9 27,381 2,46,429

1.6 TR Nos 2 30,204 60,408

3.2 TR Nos 4 32,787 1,31,148

3.0 Refrigerant Piping

Supply, Installation, testing and commissioning including vaccumiazation and

Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant

piping for VRV/VRF system, complete with fittings, with suitable adjustable ring

type hanger supports, jointing/brazing including accessories, insulated with XPLE

Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber

tubular sleeves sections of specified thickness as given below for Suction and

Liquid lines, all accessories as per

specifications etc. as required :

3.1 54.1 mm Rmt 0 2,350 -

3.2 44.5 mm Rmt 0 1,850 -

41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19

mm thick insulation 1,309

34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19

mm thick insulation 1,230

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19

mm thick insulation 1,108

22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19

mm thick insulation 865

19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm

thick insulation 707

15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19

mm thick insulation 588

12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19

mm thick insulation 466

9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm

thick insulation 331

6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm

thick insulation 245

Total DSR Amount 11,48,005

LOW SIDE WORK

Installation of VRF Air-Conditioning System of following items

S.No. Description Unit Qty. MR Rate Amount

Commissioning of VRF systems including charging of R410A gas as per site

requirements

C. ACCESSORIES

Y-Joints Nos 15 3,840 57,600

2.0 Drain Piping

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

Providing and fixing rigid PVC piping complete with fittings, supports as per

specifications and duly insulated with 6 mm thick closed cell nitrile rubber

insulation.

2.1 25 mm dia Rmt 120 100 12,000.00

3.0 Control & Transmission Wiring -

Providing & fixing control cum transmission wiring of 2 core x 1.5 sqmm

copper in suitable conduits between indoor and out door unit.

Supply & Laying of M S Slotted Angle for pipes and cables horizontaly and

vertically along with threaded rod, nut, bolt, saddle, tie etc.

10.1 MS Stand for Outdoor Units Nos 1 5500 5,500.00

Total NDSR Amount (Including GST) 1,39,200

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

FURNITURE WORKS

S.No. Description of Goods GF Qty. Rate Amount

1 DGM CABIN

a Size :- W2100xD900mm , with side - W1050x450mm 2 45886.90 91773.79

Providing and placing "Pinnacle Table ", Main Table 2100mm L x 900mm W x750mm

D, made up of 25mm thk. Prelaminated particle Board with 2mm PVC Edge Banding

supported on Gable ends made out of 25mm thk prelam particle boards with 2mm thk PVC

edge banding. The Worktops should have metal inserts on underside for modularity. The

screw used should be blunt headed and not sharp headed for metal to metal coupling .

Modesty panels is in 18mm thk Prelaminated finish. Separate provision for mounting

switches on the wall adjoining the tables shall be made by customer as the tables do not

come with switch mounting facility. Wire routing / wire management groumets shall be

provided on main Table. Side Table of size 1050mm L x 500mm D x 750mm Ht made up

of 25mm thick Prelaminated particle Board with 2mm PVC Edge Banding supported on

Gable ends made out of 25mm thk prelam particle boards with 2mm thk PVC edge

banding. Modesty panels are in 18mm thk Prelaminated Particle finish. Side Table has

Pedestal unit of size 400mm L x 450mm D x 680mm made up of 18mm thk. Prelam

particle board conforming to IS : 12823 Interior Grade with 3 Drawer ( 2 Drawer + 1 Filing

) with roller slide mechanism for 2 Drawers and Ball bearing slide for 1 Filng Unit. .

b Main Chair with headrest 2 22414.34 44828.67

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

Back Height - High Back

Back Finish - Mesh with adjustable lumbar support

Back Frame - Black Color

Seat Finish - Fabric ( Black)

Seat Height Adjustment - Pneumatic

Mechanism - Synchronized Tilt

Back Tilt Lock - Upright Position

Back Tilt Tension - Adjustable

Armrests Type - 2D Height Adjustable

Armpads Type - Polyurethane

Base Type - 5-Star in Black nylon

WARRANTY: 10 Years from the date of invoice

c Visitor Chair 4 20220.48 80881.92

Back Height - Medium Back

Back Finish - Mesh with adjustable lumbar support

Back Frame - Black Color

Seat Finish - Fabric ( Black)

Seat Height Adjustment - Pneumatic

Mechanism - Synchronized Tilt

Back Tilt Lock - Upright Position

Back Tilt Tension - Adjustable

Armrests Type - 1D Height Adjustable

Armpads Type - Polyurethane

Base Type - 5-Star in Black nylon

WARRANTY: 10 Years from the date of invoice

2 AGM CABIN

a Size :- W1530xD750mm with side storage- W1050x450mm 6 25467.20 152803.20

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

Providing and placing Table , completely made up of Prelaminated particle board

conforming to IS : 12823 Interior Grade with PVC edge banding. Top are with 25mm thk

PLPB boards .The Worktops should have metal inserts on underside for modularity. The

screw used should be blunt headed and not sharp headed for metal to metal coupling .

Table top is supported on 18mm thick Gable ends and 18mm thk Modesty panels. exposed

edges are in 2mm thk PVC edge banding & sealed edges are in 0.8mm thk PVC edge

banding. Separate provision for mounting switches on the wall adjoining the tables shall be

made by customer as the tables do not come with switch mounting facility.

Storage unit is made of combination of hinged door unit and 3 Drawer unit - Storage

body is made of 18mm thick pre laminated partical Board conforming to IS : 12823. The

back of the unit is made from 18mm prelaminated board. All the exposed edges are with

2mm PVC egde Imported banding & sealed edges are with 0.8mm thick PVC Imported

edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge

banding.Storage has adjustable shelves inside and cam lock, tower bolt and locking strips.

The units are assembled by knock down fittings such as Minifix & Dowels. All the

hardware and Hinges are from reputed brands

b Main Chair 6 10684.80 64108.80

Back Height - Medium Back

Back Finish - Mesh with Lumbar Support

Back Mesh Color - Black

Seat Finish - Fabric

Seat Fabric Color - Black

Seat Height Adjustment - Pneumatic

Mechanism Type - Synchronized Tilt

Back Tilt Lock - Upright Position

Back Tilt Tension - Adjustable

Armrests Type - 1-D PP Adjustable

Base Type - 5-Star in Black Nylon base

WARRANTY: 3 Years from the date of invoice

c Visitor Chair 6 9600.00 57600.00

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

• Medium Back with Black Mesh

• Height Adjustable PP Lumbar Support

• Fabric Upholstered Seat with moulded PU Foam

• Seat Height Adjustable with Gas Lift

• 1D PP Arms

• Black PP 5-Star Base

• Warranty – 3 Years

d Back Side Storage :- W2100xD450xH1200mm 6 24367.20 146203.20

Providing and placing storage . Storage body is made of 18mm thick pre laminated

partical Board conforming to IS : 12823. The back of the unit is made from 18mm

prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding &

sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged

shutters are sealed with 2mm thick PVC edge banding.Storage has adjustable shelves

inside and cam lock, tower bolt and locking strips. The units are assembled by knock down

fittings such as Minifix & Dowels. All the hardware and Hinges are from reputed brand

h Medium ht. Storage :- W12147xD450xH1200mm 6 29000.00 174000.00

h Medium ht. Storage :- W1800xD450xH1200mm 8 26100.00 208800.00

4 CONNECT 50

a Sharing WS :- L1200xD600mm 48 18000.00 864000.00

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

Providing and placing 1550 L x 600 W x 1200mm Ht with pedestal unit, Frame is 50 mm

thick and made of vertical Aluminium Extrusions of 1.9 mm to 2mm thickness.

Horizontal Member of frame are CRCA 0.8mm Thick. The System is complete hollow

system with space for wire reticulation . All the frames will be duly powder coated . All the

frames are fastened together by means of M6 NUTS & BOLTS . All the frames are fitted

with M10 leveling bolts.board.Raceway :-The raceway cover are sliding type and are

integrally fitting inside frame and are made out of 0.8mm - 1mm thick CRCA steel &

powder coated.The electrical raceway can be provided below worktop or above

worktop.The partition has integrated raceway provided one at skirting level thereby

making 2 Raceways. Corner and End Post are made of 1.6mm Thick Aluminium

Extrusion , Vertical Trims are made of 1.3mm Thick Aluminium and Horizontal Trims are

made of 1.1mm thick Aluminium and are duly powder coated. The free space available

within raceway accommodates power, data and communication cables. The cable can be

taken into the Frame from the floor from the bottom. Tiles: Fabric Tile: Constructed out of

4mm thick Medium Density Fiber Board (MDF) and covered with Fabric of choice.

Laminate Tile: Made out of 5mm - 6 mm thick Pre-laminated Medium Density Fiber

Board (MDF). Bottom Row of Steel Tile: Constructed out of 0.7mm CRCA sheet and

finished in epoxy powder coating. Can be given with plain / perforations / embossed

finishes. Magnetic tile: Constructed out of 0.7mm Galvanized sheet and covered with

fabric of choice. Pin up tile is made of 4.5mm Bubble Guard Sheet + Fabric wrapped.

Whiteboard marker tiles: Made out of 4mm MDF with 1mm glossy highly wear resistant

face laminate . Total thickness is 5mm.Table tops and Gable ends are of 25mm thk Pre-

laminated particleboards conforming to IS : 12823 Interior Grade. All Worktops to have

Metal Insets for fixing screws. Powder coated M.S. brackets having 2mm thickness fixed

to the partition frame support the tabletops. Gable ends are of 25mm thk. both side

laminate (BSL) with 2mm PVC edge banding on front side. Gable Ends are fixed with

2mm thick MS brackets to Frame and with 2mm thick Brackets to Worktops. Sealed edge

in table top and gable ends are with2mm thick PVC edge banding on Working side and

c WS/Desk Chairs 56 10000.00 560000.00

• Medium Back with Black Mesh

• Height Adjustable PP Lumbar Support

• Fabric Upholstered Seat with moulded PU Foam

• Seat Height Adjustable with Gas Lift

• 1D PP Arms

• Black PP 5-Star Base

• Warranty – 3 Years

13 Conference Table

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST

Supplying and placing in position of conference Round table of required size as per

image/drawing. The work surface top should be of thickness 42mm top prelaminated

particle board with 2mm thick PVC edge banding. The side panel are made up of 36mm

thick prelaminated particle & modesty panel are made out of 25mm thick prelaminated 2 45000.00

particle board with 2mm thick PVC edge banding. The wire carrier should be made from

0.6mm thick CRCA & powder coated 40-50 microns. Also having a provision of 2 module

flip top box & metal raceway for wire flow.

Total 2534999.58

Digitally signed by AMIT

Date: 2023.12.20 17:20:13 IST