S/R to SH 53 to Dibra for the year 2025-26

Clearing grass and removal of rubbis up to a distance of 50 m out side the periphery of the area as per direction of Engineer in charge.

Labour for scraping, cleaning the road surface applying tack coat using 3.0 kg. of Bitumen for 10 sqm & laying 37.5 mm thick B.U.S.G in one layer using 0.45cum 25mm to 40mm size hard granite metal complete as per the direction of Engineer-in-charge.

Cleaning the existing black topped surface with removal of foreign materials with brooms or soft brushes and finally dusting with old gunny bags and / or compressed air to receive bituminous treatment.

Providing and applying tack coat over existing bitumenious surface with 60/70 penetration grade bitumen using bitumen pressure distributer @ 0.20kg./sqm including all cost, carriage, and taxes of all materials, labour, T&P etc. complete as per specification and direction of the Engineer-in-charge.

Providing and laying 20 mm thick premix carpet using 0.27 cum of 13.2 to 5.6mm size crushed stone aggregates and 14.60 kg of bitumen for 10 sqm of road surface including hand packing and consolidation with PRR including cost conveyance of chips and bitumen etc complete

Providing and laying 6 mm thick precoated seal coat Type-B using .06 cum of 6.7mm size chips and 6.8kg of bitumen for 10 sqm of road surface including rolling with PRR including cost conveyance of chips and bitumen etc complete

Supplying & Fixing Guard posts as per direction of Engineer in charge. including cost, conveyance of all materials as per specification.

Providing and fixing of typical PMGSY informatory sign board as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause Annexure 300,800,1700 of MORD as per direction of the Engineer in charge

Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MORD technical Specification Clause 1703 as per direction of the Engineer in charge Ordinary Kilometer stone (Precast)

Providing and fixing of retro-reflectorised, cautionary, mandatory and informatory sign as per IRC-67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminum sheeting, 1.5mm thick or A.C.P. (Aluminum composite panel) used for sign boards with a thermoplastic core of low density polythylene (LDPE) between two thick sheets of aluminum with over all thickness of 3 mm and aluminum thickness of 0.3mm on both sides supported on mild steel angle post 75m x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cm x 45cm x 75cm, 60 cm belowground level as per approved drawing including cost, convayance, royalty, taxes of all materials, labour, T&P, excavation, curing etc. complete, under supervision of E.I.C. 600mm Equilateral Triangle

600mm Circular

Painting two coats with any approved paint including cost of paints