Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Rejected-Technical | Rejected-Technical Commercially Disqualified |
| 3 | Rejected-Technical | Rejected-Technical Technically Disqualified |
Tender Value
₹74 L
EMD Value
₹1.5 L
Closing Date
10 Nov 2020, 2:30 pmClosed
DGM TS COMMERCIAL
DGM/HOD (TS-COMMERCIAL) Technical Services Department, 1st Floor, Admin Building, Alcock Yard, Mazagon Dock Shipbuilders Limited, Dock Yard Road, Mumbai 400010 (INDIA)
Modernization of MDRC Tennis Court Including Flooring And Fencing in Residential Area, MDL, Mumbai.
2020_MDL_83321_1
1900000084
Open Tender
Civil Works
120 days
MAZAGON DOCK SHIPBUILDERS LTD
AS PER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹0
₹1.5 L
Yes
21 Jan 2021
29 Sept 2020
11 Nov 2020
29 Sept 2020
10 Nov 2020
21 Oct 2020
29 Sept 2020 - 26 Oct 2020
Dismantling tile work in floors,cladding, dado etc laid in cement mortar including stacking material and carting away debris outside MDL premises to municipal dumping ground complete as directed at any height / Location etc.
Dismantling carefully PCC Work & carting away debris outside MDL premises to municipal dumping ground complete as directed at any height / Location etc.
Dismantling and stacking within MDL scrap bin located at Alcock Yard, fencing posts or struts including all earth work and dismantling of concrete etc. in base of: T’ or ‘L’ iron or pipe
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within MDL scrap bin located at Alcock Yard.
Demolishing carefully brick work/ precast concrete block/Siporex block of any thickness including tile work, plaster etc as directed & disposal of debris / outside MDL premises to municipal dumping ground etc. complete as directed.
Dismantling GI/Galvalume Sheet roofing upto 10mm thick including ridges, hips, valleys and gutter and stacking the serviceable materials within MDL premises and disposal of un-serviceable material outside MDL premises at Municipal Dumping ground etc complete as directed.
Dismantling barbed wire or flexible wire, concertina coil, rope in fencing, chain linked fencing including making rolls and stacking within MDL premises scrap bin.
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil including carriage of excavated earth by mechanical transport including loading, unloading and staking outside MDL premises to municipal dumping ground etc complete.
Providing and laying in position ready mixed concrete (RMC) manufactured in fully automatic batching plant and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate / retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-Charge. M-25 grade reinforced cement concrete by using 330kg of cement per cum of concrete. All works upto plinth level
Providing and laying Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)
Providing and applying plastering on RCC/brick masonry work with 12 mm thick cement mortar (1:4) including curing etc; all complete as directed.
Providing and fixing steel work welded in built up sections/ framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required - in gratings, frames, guard bar, ladders, railings, brackets, gates and similar works
Providing & fixing in position 0.50mm thick corrugated colour coated steel sheet comprises of cold rolled galvalume steel as per AS 1397, 550 MPa yeild stress with hot dip metallic coating on both side confirming to AS 1377 (150 gsm) including all necessary scafolding, shop drawings fixing with mechanically galvanized self drilling fastners, EPDM seals to make the roof leak proof, all fittings and fastners. etc. complete strictly as per manufacturers specification subject to approval of Engineer. (No laps shall be measured and paid for) - For roofing
Finishing with Epoxy paint (two or more coat) at all locations prepared and applied as per manufacur's specifications including appropriate epoxy priming coat, preperation of surface etc. complete-On Steel work
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade
Providing and fixing Basket Ball pole made of 6" Square mild steel black pipe, Height jack type, with safety padding.Including Basketball board made up of 30 mm imported Acrylic Sheet Size 180 CM X 105 CM and Basketball board ring made of 20 mm hallow steel tube etc complete.
Providing and fixing Outdoor Professional interlocking tiles Size 304.80 mm x 304.80 mm x 15.7 mm (WxLxH ) for Multipurpose ground.It is polypropylene tiles and laid directly on the concrete base with end locking edges, including line marking etc complete.
Providing and Fixing Granite of 18mm thick gang saw cut mirror polished premoulded and prepolished machine cut for kitchen platforms, vanity counters, window sills, facias and similar location of required size of approved shade, colour and texture laid over 20mm thick base cement morter 1:4 (1 cement : 4 coarse sand ) with joints treated with white cement, mixed with matching pigments, epoxy touch ups, including rubbing, curing, moulding and polished to edge to give high gloss finish etc. complete at all levels as directed by Engineer-In-Charge Granite of any colour and shade.
Wall lining butch work upto 10m height with Dholpur stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width, including embedding every tenth layer and bottom most layer in masonry or concrete after making necessary chases of size 75x75 mm and by providing layer of 75 mm thick strips i/c 12 mm thick bed of cement mortar 1:3 (1 Cement : 3 coarse sand) i/c ruled pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in-charge.
Fabrication, supply and Installation of backgrund ACP sheet fabricated out of 3mm ACP sheet. The sheet will be cladded on aluminium sq. pipes. The complete assembly of the letters and ACP will be installed at site using proper brackets ets. Complete as directed by EIC. 5 % retention amount against 5 years warrenty for ACP
Stainless Steel 18 gauge304 Grade Name Plates Fabrication, supply and Installation of "Building names" are as below. The letters will be fabricated out of using 18 gauge 304 grade SS sheet. The letters will have side depth of 1.5 inches. The finish of the ss letters will be Matt finish. Complete as directed by EIC. 5 % retention amount against 5 years warrenty for SS material.
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
Supplying and erecting metal work in CRCA sheet with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.
Providing & erecting 3 Pole MCCB of 200A,415V capacity with short circuit rating 25 kA (Ics=100% of Icu) adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB
Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity with 99.9% aluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCPBB
Supplying & erecting porcelain/epoxy bus bar support complete erected in provided MS box for 200/300A complete.
Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.
Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
Supplying, erecting & marking SPMCB 6A to 32A, C-series (for otor/power) in provided distribution board as per specification no. SW-SWR/MCB
Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc
Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc.
Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB
Supplying, erecting & marking FPMCB 6A to 32A in provided distribution board as per specification no. SW-SWR/MCB
Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SWSWR/ MCB of PWD Specifications
Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
Supplying, erecting & terminating XLPE armoured cable 3 core 2.5 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
Supplying & erecting FRP box of size 250 x 200 x 100 mm, 2.7 mm thick complete on pole/wall as per specification no. CB-SB
Supplying, fixing and commissioning 2 pole, RCBO (residual current breaker with overcurrent short circuit 10 kA and earth leakage protection), with 30/100/300 mA sensitivity and having capacity of 6/10/16/20/25A, as per specification no WRCCB/RCBO
Supplying & erecting water tight terminal box of 1.6 mm (16 gauge) CRCA sheet of size 300 x 200 x 150 mm complete on pole as per specification no. CB-SB
Supplying & erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete.
Supplying and erecting LED Flood light fitting of 200W, including lamp, with PF > 0.95, class IP 65 and above Housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2 Note: - 1) System efficacy shall not be less than 90 lumens/watt. 2) CRI shall be more than 70. 3) Total harmonic distortion voltage and current shall be less than 10% 4) Operating voltage range shall be in range of 160V to 270V 5) Power Factor of Luminaire shall be more than 0.95 6) Luminaire shall conform to respective IS. 7) Luminaire shall withstand surge protection upto 3 kV. 8) Luminaire shall carry minimum three years’ warrantee. 9) Correlated Color Temperature (CCT) shall be required between 2700K-6500K. 10) There shall be provision for termination of earth connection.
Supplying and erecting LED flexible strip light 5m length upto 25W conforming IP 65 of any colour with driver complete.
Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.
Supplying & erecting HMS P.V.C. conduit 25 mm. dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
Supplying and erecting UPVC reinforced flexible conduit 20 mm in dia. conforming to I.S. and approved make with required number of couplings, PVC bushes, check nuts etc. complete.
Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner
Dismantling the existing light, fan, bell, clock, independent plug point, wiring including circuit mains of all types along with accessories etc. complete as per specification No: WG-DM/PW Note:- Dismantled material of Point wiring / circuit mains/mains, sub-mains / telephone / LAN / WAN / TV wires / cables shall be retained by contractor.
Dismantling the existing Telephone / Lan / Wan / TV cables and wires of all sizes along with casing-capping / conduit complete as per specification No: WG-DM/PW Note:- Dismantled material of Point wiring / circuit mains/mains, sub-mains / telephone / LAN / WAN / TV wires / cables shall be retained by contractor.
Dismantling of existing fluorescent fittings of any type & size.
Dismantling the existing W.T. fluorescent fitting / S.V./ M.V. / M.H. lamp /LED fitting from wall with brackets and making the site as original complete.
Dismantling the existing switchgears, DB, and Bus bar of any size complete with/ without board or angle iron frame
Dismantling the existing cables of all types & size upto 10 sq mm.
Dismantling the existing cables of all types & size above 10 sq mm upto 50 sq.mm.
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid