Krishnagiri District, Veppanapalli Block, SBM (G) Phase II 2025-2026, Construction of Plastic Waste Management Unit at Veppanapalli H/o. Veppanapalli. Package No. 2025-2026-VNPI-21

Amount

1. Construction of Plastic Waste Management Unit at Veppanapalli H/o. Veppanapalli. Estimate Amount: Rs. 16.00 lakhs

Earth work excavation for foundation in all soils and sub soils to full depth etc., ordinary soil complete

Cement Concrete 1:4:8 (One Cement, Four M.Sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification

Random Rubble masonry in CM 1:5 foundation and basement including simultaneously flush

Supplying and filling in foundation and basement with filling sand including water consolidating etc.,

Refilling in foundation and basement with excavated earth in layer of not more than 15cm thick

Brick work using country bricks of size 83/4"x41/4"x23/4" in cement mortar 1:5 (One cement and five M.Sand) including curing neat finishing, etc., complete complying with standard specifiction.

Supplying and erecting steel centering for plane surfaces in foundation and basement for staircase steps column footings plinth beam grade beam etc.,

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Cement Concrete 1:1-1/2:3 (One Cement, One and a half crushed stone M.Sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M.Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three M.Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Plain Cement Concrete 1:2:4 (one cement, two M.Sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete

Supply and Cost of Steel door , Window, including all charges etc.. Complete

Door (1.80m x 2.05m)

Window (1.80m x 1.30m)

Labour Charges for Fixing of Steel doors, windows

Window

Supply and Fixing of Steel Truss with standard specification including all charges etc complete.

75mmx50mm Rectangular Section

Vertical 50x50mm Square Section

Supply and Fixing of Roofing with best quality Tuflon sheet including cost and conveyace of all materials to work site complete. Roof Top

Provision for Electrification Arrangements

Light Point SD no. 20

Street Light fitting SD no: 94

Tube Light SD 88

Plug Point SD No: 36

Shredder Machine Dimension LxWxH (mm) : 1150*1100*1700 Grinder Model 24" Length working Area 610*350mm Motor Power 20 HP Moving Blade : 18 Nos, Fixed Baldes : 4 Nos Blade Material HcHcr including GST 18 %

Dust Removal Machine Dimension - 12500*2550*1350 (mm) Drum Dia - 915 mm Perforated Casting Drum Length - 2100mm Motor power - 15HP Heavy frame structure Eletric Control panel Including GST 18 %

Name Board Charges

Photographic Charges

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

Sanjay Contractor (BID ID -1436641)