Kalanaur Town- Constructio...

Amount

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : Make IVC/VAG (500 mm i/d )

H.T METER: Provision for HT metering Panel along with VCB, entire cable network and all other required electrical items complete in all respect.

Supply, erection, testing of 3.5 core aluminum cables with ISI marked for making connection with LT Bus Bar and LT Panel Board to electric motor and other electric appliance with underground system in PVC / flexible pipes/ cable tray with all required accessories like thimble etc. as directed by Engineer-in-Charge complete in all respect. 300 Sqmm 3.5 core

SITC of copper Cable 120 Sqmm Single core copper Cable for Panel to Pumps.

Providing and laying Double Flanged (screwed / welded) Centrifugally (Spun) Cast Iron, Class B (IS : 1536) : 400 mm dia C.I. Double Flanged Pipe

Providing and laying Double Flanged (screwed / welded) Centrifugally (Spun) Cast Iron, Class B (IS : 1536) : 600 mm dia C.I. Double Flanged Pipe

Supply, Laying, testing Commissioning for NRV at Pipeline of IVC VAG make PN 1.6 Size 300 mm

RAW WATER PUMP: - Supplying, erection, testing and commissioning of Horizontal split casing type pumping sets minimum four (4) Star rating duties coupled to AC squirrel cage induction type motor with 1440 RPM 3 phase 50 Hz and accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame as per approved DNIT. Motor pumping set for Raw Water having head as per the indicated requirements of discharge in LPM and power capacity in BHP as per IS marked 12600 LPM X 50 M X 235.00 HP.

NS Item -Panel Board - Supply, erection, testing and commissioning of floor mounted electrical LT Panel board, fabricated from 16 SWG CRCA sheet duly stouten with suitable angle iron framework and completely powder coated of suitable size having following items for Horizontal split casing pump set of suitable for 2 Nos. pumping set 12600 LPM with 50 Mtr. Head Horizontal split casing pump set and required accessories: - ` Cost of material as per market rates:- (Incomer) 1. MCCB 630A TP MCCB 50 KA Motor backup Protection Duty = 1 Nos. 2. Indicator Indicating Lamp R/Y/G 230 V = 3 Nos. 3. M/F Multifunction meter digital type = 1 Nos. 4. MCB 6Amp. control MCB = 3 Nos. 5. CT 200/5Amp. Class 1.0 10VA = 3 Nos. 6. Relay under Voltage Relay = 1 Nos. (Outgoing section) 1. MCCB 300 a TP MCCB 50 KA Motor Backup Protection Duty = 2 Nos., 2. Contactor MNX 300A TP Power contactor AC2 2NO plus 2NC = 4 Nos., 3. Contactor MNX 185A TP Power contactor AC2 2NO plus 2NC = 1 Nos., 4. Relay Microprocessor based overload relay 150-300Amp = 2 Nos., 5. Timer On delay Timer (Star Delta) = 2 Nos., 6. Push button (On, Off) = 4 Nos., 7. Indicating Lamps, LED Type (On, Off, Trip) = 6 Nos., 8. Auxilary Contactor 2NO plus 2NC 240V AC = 4 Nos., 9. Preventor Single Phasing Relay = 2 Nos., 10. Automatic Power Factor Control Panel 150 kVAR = 1 Nos., 11. Hardware/ Miscellaneous, 12. Enclosure (1800x1800x400 mm, 13. Wire, 14. Wiring / Margin/ Busbar (Al.) (Note: - All accessories should be design load of motor).

NS Item -Panel Board - Supply, erection, testing and commissioning of floor mounted electrical LT Panel board, fabricated from 16 SWG CRCA sheet duly stouten with suitable angle iron framework and completely powder coated of suitable size having following items for Horizontal split casing pump set of suitable for 3 Nos. pumping set 12600 LPM with 50 Mtr. Head Horizontal split casing pump set and required accessories: - ` Cost of material as per market rates:- (Incomer) 1. MCCB 630A TP MCCB 50 KA Motor backup Protection Duty = 1 Nos. 2. Indicator Indicating Lamp R/Y/G 230 V = 3 Nos. 3. M/F Multifunction meter digital type = 1 Nos. 4. MCB 6Amp. control MCB = 3 Nos. 5. CT 200/5Amp. Class 1.0 10VA = 3 Nos. 6. Relay under Voltage Relay = 1 Nos. (Outgoing section) 1. MCCB 300Amp TP MCCB 50 KA Motor Backup Protection Duty = 3 Nos. 2. Contactor MNX 300A TP Power contactor AC2 2NO plus 2NC = 6 Nos. , 3. Contactor MNX 185A TP Power contactor AC2 2NO plus 2NC = 3 Nos, 4. Relay Microprocessor based overload relay 180-300Amp = 3 Nos. , 5. Timer On delay Timer (Star Delta) = 3 Nos. , 6. Push button (On, Off) = 6 Nos. , 7. Indicating Lamps, LED Type (On, Off, Trip) = 9 Nos. , 8. Auxilary Contactor 2NO plus 2NC 240V AC = 6 Nos. , 9. Preventor Single Phasing Relay = 3 Nos. , 10. Automatic Power Factor Control Panel 150 kVAR = 1 Nos., 11. Hardware/ Miscellaneous 12. Enclosure (1800x1800x400 mm , 13. Wire 14. Wiring / Margin/ Busbar (Al.) , (Note: - All accessories should be design load of motor).

Less Credit for old RCC NP2 pipe 800 mm i/d including cost of removing etc. complete in all respect.

Bidder Name

Amount

Lalit Kumar(GSTN-06ALGPB5309Q1ZY)

RAJKUMAR(GSTN-06BMEPK8901M1ZS)

Sunil Kumar Contractor(GSTN-06ANBPK3767E1Z5)

M/S SHREE BALAJI BUILDERS(GSTN-NA)

Mukesh Rathee contractor(GSTN-NA)

Sh. Ashok Kumar Sindhu(GSTN-NA)

M/S SHREE BALAJI BUILDERS

Sh. Ashok Kumar Sindhu

RAJKUMAR

Sunil Kumar Contractor

Mukesh Rathee contractor

Mukesh Rathee contractor

Sh. Ashok Kumar Sindhu

Sunil Kumar Contractor

Lalit Kumar

M/S SHREE BALAJI BUILDERS