PERIODICAL SERVICES AND REPAIR REPLACEMENT OF FALSE

Amount

M&L for complete removing existing treatment old surface of wall and applying two coat distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer by EIC, of required shade and colour, over applying wall care putty of 2 mm thickness over surface to prepare the surface even and smooth. complete, as per manufacturer's specification. complete all as specified and as directed by Engineer-in-Charge. Note:- Work will executed upto 5th floor.

M&L for preparation of old decorative surfaces including scraping down smoke dust mould, mean cut salt and trading oils and greasy spot etc. on ceiling including cornices, plasters etc. (plastered or unplastered surfaces) and applying one coat of white (lime) wash on old washed surfaces complete all as specified and as directed by Engineer-in-Charge.

All as per item No 02 above but on wall complete all as specified and as directed by Engineer-in-Charge.

Taking down cement of cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces (Cement plaster 1:4) finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces (Cement plaster 1:6) finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge

M&L for rendering 5mm thick cement mortar (1:3) as in ceiling, soffit of staircase, chhajjas facia etc including cement slurry etc complete all as specified and as directed by the Engineer-in-Charge.

M&L for three coats of white wash on ceiling, soffit of staircase, chhajjas facia etc newly plastered surfaces including preparation of newly plastered surfaces or unplastered surfaces complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparing new surfaces (plastered or unplastered) of walls and applying two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old painted wooden surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge

M&L for one coat of synthetic enamel paint including preparation of old decorated steel surfaces/concrete surface of any description over 10 Cm width or girth not otherwise described complete all as specified and as directed by the Engineer-in-Charge

M&L for staining and varnishing wood and wood based surfaces of any description over 10 cm in width or girth and applying thin varnishing including preperation of old treated surfaces complete all as specified and as directed by the Engineer-in-Charge

M&L for complete removal of existing treatment from external surfaces of walls by brushes and washing down and stopping of surface and levelling / edging the disturbed portion plane/edges using necessary filling compound of putty to obtain smooth/regular/even finish surface with using of sand paper etc and prepare surface , applying two coats of exterior weather proof (coat) paint on plastered/conrete surfaces of walls, paths , etc., over a coat of cement base paint primer complete all as specified and as directed by the Engineer-in-Charge.

M&L for 10mm thick plaster of Paris ceiling (Gypsum anhydrous) to sunk or raised moulding to flat surface over metal frame work incl reinforced with G.I. wire mesh & Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre & Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long all as specified and directed. Note Rates includes for taking down electrical fitting and refixing the same if required complete all as specified and directed.

M&L for complete removing on existing treatment old surface of wall and apply 2 coats of plastc emultion paint over 2mm thick wallcare putty over 10cm girth or width, not otherwise described complete all as specified and as directed by the Engineer-in-Charge

S&F in repair self adesive anti skid strips for stairs of approved width (50mm to 75mm) completed all as specified and directed by Engr-in-Charge.

S&F in repair for sensor Urinal, Half stall type, white/colour/ starwhite including all fitting and fixture complete all as specified and directed.(hindware Cat No.60018, or equivalent )

Dismantling plain corrugated steel sheeting any gauage thick ness including Nainital and similar pattern complete all as specifed and directed.

S&F for 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugated side lap fixed with L or J type or cranked hook bolts complete all as specifed and directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F in repair for 15mm bore CP autometic/touchless power sensor oprated wash hand basin tap screwed down for iron pipe and fixed with power battery completed all as specified and directed by Engr-in-Charge.

S&F plain or coloured floor mounted bathroom vanity of size upto 600mm' to 900mm in width and 800mm to 900mm in height of water proof prelaminated PVC material with fixed wash hand basin along with suitable pillar tab and water disposal arrangment, with reqd drawers and shutters completed all as specified and directed by Engr-in-Charge. Note :- Rate includes hinges, handles, locks, magnetic catch, sliding channels.

Ashish Sehgal and Co.

GIR RAJ BUILDERS

Rishi Constructions

SM CONSTRUCTION COMPANY