COMPREHENSIVE REPAIR AND CERTAIN MISC WORK IN MD ACCN IN ZONE B AND C AREA UNDER AGE B/R-I (C) UNDER GE (CENTRAL) KHADKI.

Amount

NOTE FOR ALL PAINITNG ITEMS :- The following precautionary measures shall be ensured by the contractor during execution of work :- (i) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers. (iii) Before applying cement base paint/weather proof acrylic emulsion paint contractor shall use the wire brush for the removal of loose paint, dust, algae, moss and filling of crack using crack sealent and cleaning of surface by spray jet. (iv) Application of cement base paint strictly done by spray/mechanical spray machine only, otherwise 30% cost shall be reecovered from the respective item. (v) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery.

NOTE FOR PLUMBING AND SANITARY ITEMS:- (i) Contractor shall deposit entire quantity of plumbing and sanitary wares materials required / covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis. (iii) make specified in BOQ will supersede to all.

Material and labour for preparation of old plasterd or unplastered surfaces of wall and applying one coat of oil bound destemper complete all as specified and directed.

Material and labour for preparation of old plasterd or unplastered surfaces of ceiling and applying one coat of oil bound destemper complete all as specified and directed.

Material and labour for complete removal of existing treatment on wall surfaces of any description plasterd or unplastered surfaces of wall and applying two coat of oil bound destemper,including Priming plastered and other surfaces with alkali resistant primer complete all as specified and directed.

Material and labour for complete removal of existing treatment on ceiling surfaces of any description plasterd or unplastered surfaces of ceiling and applying two coat of oil bound destemper,including Priming plastered and other surfaces with alkali resistant primer complete all as specified and directed.

Material and labour for 3mm thick wall care putty on wall/ceiling complete all as specified and directed.

Material and labour for complete removal of existing treatment on wall surfaces of any description plastered or unplastered surfaces of wall and applying two coats of cement base paint including Priming plastered and other surfaces with alkali resistant primer complete all as specified and directed. NOTE :- (i) filling of cracks,holes and dents are included in the quoted rates (ii) Proper curing with water to be done before and after application of 1st coat. (iii) work to be executed at any height upto 15 mtr

Material and labour for complete removal of existing treatment on wall surfaces of any description including brooming down with steel wire brushing, scrapping down smoke soot's , moulds, moss and efflorescence, salts, trading oil and greasy spots etc and applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint of approved tint over a coat of weather proof primer including filling the cracks etc with crack filling upto 5 bars of positive hydrostatic pressure on vertical walls without any dilution with forced coverage not more than 3.5 Sqm / Ltr as per manufacture's instruction and all coats incl primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSIAllow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and directed Make: (Apex Ultima Protek Asianpaints/ Nerolac excel top guard / Berger weathercoat long life 10 )

Material and labour for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applyinbg one coat of synthetic enamel paint any tint all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of any tint complete all as specified and directed.

Clearing and cutting of plant roots on wall, chajja & roof and removing rubbish upto a distance of 50 metres outside the periphery of the area under clearance complete all as specified and directed.

Material and labour for rendering 12mm thick on fair faces of brick or concrete surfaces of wall in CM 1:6 and finishing even and smooth without using extra cement including taking down old cement plaster.complete all as specified and directed

Material and labour for 15mm thick cemet plalster in CM 1:4 over wall / concrete surfaces finishing even and smooth without using extra cement including taking down old cement plaster, complete all as specified and directed by Engineer-in-Charge.

Material and labour for 5mm thick rendering on concrete surface of ceiling in CM 1:3 and rendering is to be finished even and smooth with out using extra cement,including taking down old cement plaster.complete all as specified and directed by Engineer-in-Charge.

Material and labour for WPT of external walls, chajjas and newly plaster surfaces by applying two coats of elastomeric coating material after cleaning the surfaces thoroughly and sealing all cracks with acrylic sealing compound as per the manufacturers specifications complete all as specified and as directed. MAKE :- Dr Fixit/Pidilite or equivalent

Cleaning the surface with wire brush, detecting sources of leakages and removing/taking down unsound treatment/surface and M&L for carrying out non-destructive waterproofing treatment to sunken portion of slab, floor and walls of bath, WC, WHB and floor traps (combined unit) by using construction chemical method as hydrophobic PU grouting, etc, with first course of injection MDI based PU foam and second course of injection PU plain all as per manufacturers instruction, etc, complete and as directed. The PU foam shall have 100% solids and solvent free, and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50. (Make: PIDILITE or equivalent) complete all as specified and directed.

Making hole and Material and labour for fixing the metallic packer for hydrophobic PU foam and Sealer as per manufacturers specification. The PU foam shall have 100% solids and solvent free, and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50. (Make: PIDILITE or equivalent) NOTE :- This item is catered only for M&L for fixing the metallic packer)

Material and labour for the tile joint chemical cleaning and re-grouting carefully by washing the existing tile with heavy duty tile cleaner preferably of M/S Pidilite or equivalent cleaner, again washing with fresh jet water, scratching the joints and filling the same with (white/matching colour) epoxy tile grout of M/s Pidilite, ROFF RTM epoxy or equivalent, curing, cleaning the surface etc, complete all as directed by Engr-in-Charge and as per the sample done at ground level.

Material and labour for 25mm thick PCC 1:2:4 type B-0 (1:2:4) (12.5 mm graded aggregate) as in leveling course of floor including demolition of existing PCC floor, complete all as specified and directed.

Material and labour non skid coloured digital ceramic tiles 300x300/400x400 mm x 6 to 7mm thick,in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6 including dismantling complete all as specified and as directed.

Material and labour glazed ceramic tiles size of tiles 450x350/300x200/300x600x5 to 6mm thick in vertical surface such as in skirting/dado etc over and including 10 mm thick cement plaster in CM 1:4 including dismantling all as specified and directed.

Material and labour vitrified ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including10 mm thick screed bed in cement mortar (1:4) including dismantling complete all as specified and as directed.

Material and labour vitrified ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick back coat in cement mortar (1:3) including dismantling complete all as specified and as directed.

Material and labour for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15mm thick cement Screed bed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling complete all as specified and directed.

Supply and fix in reapirs water closet (Squat Pattern) complete including provn of lime concrete bedding Orissa pattern size 580 x 440mm white with integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor to match with existing complete all as specified and as directed.

Supply and fix vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) fixed as in repair complete all as specified and as directed.

Supply and fix in repair PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flushpipe, brackets all as specified and directed by EIC.

Supply and fix vitreous china wash basin white flat back size 580x450 mm including, 32 mm dia CP waste fitting and brackets complete all as specified and as directed.

Supply and fix in repair,15 mm bore dia steel water tubings medium grade galvanised with and including all medium grade fittings fixed complete to walls and ceilings or laid in floors, including taking down, complete all as specified and directed by EIC.

Supply and fix 3 layered rotational moulded polyethylene water storage tanks capacity 1000 lit in white colour ( cylindrical vertical with closed top ) hoisted and fixed in position including dismantling and removing of old tank complete all as specified and as directed.

Supply and fix 3 layered rotational moulded polyethylene water storage tanks capacity 500 lit in white colour ( cylindrical vertical with closed top ) hoisted and fixed in position including dismantling and removing of old tank complete all as specified and as directed.

Supply and fix in repair,110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, including T, bend, Y, etc laid in trenches or in floors complete all as specified and as directed.

Supply and fix in repair PVC floor trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified and as directed.

Supply and fix in repairs bib taps cast copper alloy CP fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule 15mm bore dia complete all as specified and as directed by EIC.

Supply and fix in repair stop valves cast copper alloy CP fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia complete all as specified and as directed

Supply and fix in repairs PVC connections 15mm dia with brass nut on both ends and washers 450mm long complete all as specified and as directed.

Supply and fix in repairs 32 mm bore PVC waste pipe 1000 mm long of approved make suitable for WHB, Urinals etc complete all as specified and as directed.

Supply and fix in repair health faucet cera Model-F 8030105AB (ABS), with 1 meter SS braided connection pipe techno commercial equivalent complete all as specified and directed.

Supply and fix in repair wall mixture three in one with complete accessories complete all as specified and directed .

Supply and fix in repair harrison rails, of anodised aluminium alloy with fixing brackets, stops, rollers etc. complete all as specified and directed .

Supply and fix pillar taps, cast copper alloy, fancy type,chromium plated,screwed down high pressure,with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed .

Disconnecting existing tanks n exc 500 litre capacity,setting aside ( or lowering if required ) for repairs, cleaning, etc. and hoisting if required reconnecting and refixing in position as same complete all as specified and as directed.

Supply and fix in repair stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed .

Supply and fix in repair cast copper alloy chromium plated shower rose fancy type 125mm size fixed to 15 mm bore pipe complete all as specified and directed .

Supply and fix in repair 100 mm Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed .

Supply and fix in repair plain fillets. square, rectangular in section exc 13 sqcm but n exc 25 sqcm, 2nd class hardwood, clean sawn, secured with nails or brads in door frame, cupboard frame, kitchen cabinet frame etc complete all as specified and directed .

Supply and fix 18/19 mm thick exterior grade Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, including,dismantling and all necessary fittings as in cupboard shutters,kitchen cabinet shutters complete all as specified and as directed by Engineer-in-Charge.

Resecuring or easing and adjusting without taking down of Shutters of any description exc 1 sq. m and n exc 2 sqm each complete all as specified and directed by Engr-in-Charge

Supply and fix in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm fixed with tinned tack of stainless steel wire staple or wooden beads as in door, windows/ventilators etc complete all as specified and directed .

Supply and fix in repair 3 mm thick sheet glass ordinary quality, in squares n exc 0.5 sq. m each pane with putty/ beads including removing loose or decayed putty/ beads,and hacking out old glass in metal frame etc complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkats and frame exc 1.5 Sqm but n.exc 4.00 sqm each including shutter wiuthout taking off shutter from the frame and removing from site.

Taking down chowkats and frame of doors/windows/ventilators n. exc 1.5 Sqm each including shutter wiuthout taking off shutter from the frame and removing from site.

Taking down shutters of any description exc 1 sqm but n exc 2 sq. m each complete all as specified and as directed by Engr-in-charge.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.

Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitabe PVC sheet beading, and joined together with solvent cement, including, handle, hinges, tower bolt all necessary fittings, supplying & fixindg in the frame at site as per specifiction & drawing.

Supply and fix pressed steel door frame for doors of size 105 x 60mm with single rebate including necessary fixing lugs, hinges, lock strike plate, etc complete with and including hollow section of frame to be filled with PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 30 mm flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

Supply and fix 30 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

Supply and fix aluminium anodised barrel tower bolt 200mm long of extruded section with steel screws complete all as specified and as directed.

Supply and fix extruded aluminium alloy handles, fabricated type, anodised of size 150mm fixed with screwscomplete all as specified and as directed by Engineer-in-Charge.

Supply and fix aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 100 mm size stainless steel Medium weight butt hinges for door shutters and frames fixed with bright screwes complete all as specified and as directed by Engineer-in-Charge.

Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x 17.70x1.2mm thick with and including two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fix aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc making to the jambs complete all as specified and as directed by Engineer-in-Charge.

Supply and fix for frame work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge.

Removing old tar felt, all loose dirt,old roof tiles,including taking down cement plaster cleaning the concrete surface including removal & cleaning of vegetation, fungus,moss small trees etc from the roof top with wire brush, removing the strips of lightening conductor including refixing the same after repair work and applying neat cement slurry @ 1.5Kg/Sqm complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering 10 mm thick on existing concrete surfaces of roof in CM (1:4) mixed with water proofing compound @ 3% by weight of cement, finishing even and smooth without using extra cement with and including water proofing compound over RCC slab,complete all as specified and directed by Engineer-in-Charge

Material and labour for applying oil bound bitumen primer @ 0.3 kg/Sqm,over RCC slab, and providing and laying 3 mm thick APP modified water proofing memberane, weighing not less than 3.00 kg/sqm, reinforced with non woven polyester reinforcement matt weighing not less than 160 gm/Sqm polyester core, having softening point not less than 150°C, longitudinal tensile strength not less than 650 N/ 5 cm, tearing streangth of 180 N / 5 cm, torch application method, with a overlap of 100mm at the sides and 150mm at the ends and sealing and applying a coat of solar reflective aluminium paint @ 0.2 Kg/Sqm on membrane surfaces complete including carrying out 24 hrs ponding test over the complete treatment complete all as specified and as directed by Engineer in charge.

Dismantling asbestos cement (corrugated or semi corrugated) sheets/fibre sheet/galvalume steel sheet in roof covering complete all as specified and directed .

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix in repair mild steel, Fe 410-W (Gde E- 250 quality-A) Framed work as in doors or gates,roof structure of any size and section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; including all necessary fitting, also fastening and fixing, including dismantling, complete all as specified and as directed by Engr-in-Charge

Supply and fix in repair E-board 'Everest' make 600x600x4mm thick white prelaminated self embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 2mm dia to be fixed by approved rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction, including taking down wall/ceiling boards(fibre, pulp insulation etc) or inslutation boards any thickness incl fillets complete all as directed..

S M MISHRA

VP DEVELOPERS AND CONTRACTOR

M/S KISHAN CONSTRUCTION

MAHESH DADAJI BACHHAV

JP ENTERPRISES

S.R.M.K Enterprises

L.K.R.TIWARI CONSTRUCTION

V.R.PRAJAPATI AND CO.

shree ram enterprises