Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹1.3 LAdmitted-Finance | -50.01% | ₹1.3 L | L1 | Admitted-Finance |
| 2 | L2₹1.6 LAdmitted-Finance | -37.97% | ₹1.6 L | L2 | Admitted-Finance |
| 3 | L3₹1.6 LAdmitted-Finance | -35.51% | ₹1.6 L | L3 | Admitted-Finance |
| 4 | L4₹1.6 LAdmitted-Finance | -35.01% | ₹1.6 L | L4 | Admitted-Finance |
| 5 | L5₹1.9 LAdmitted-Finance | -25.77% | ₹1.9 L | L5 | Admitted-Finance |
Tender Value
₹2.5 L
EMD Value
₹5,000
Closing Date
10 Apr 2026, 4:00 pmClosed
Executive Engineer PWD(RandB) Division Satwari
Executive Engineer PWD RandB Division Satwari
BOQ
2026_PWDJK_306854_1
Short e-NIT No. 130 of 2025-26 Dated 27-03-2026
Open Tender
Civil Works
15 days
Gadigarh
eNIT/SBD
2 documents required · 2 mandatory
₹600
Executive Engineer PWD(RandB) Division Satwari
₹5,000
Satwari
17 Apr 2026
27 Mar 2026
11 Apr 2026
27 Mar 2026
10 Apr 2026
27 Mar 2026
30 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and fixing Heavy Duty Plastic Speed Breaker (Black & Yellow reflective type). 50mm to 75mm height complete with anchor bolting, drilling in existing concrete/Bituminous surface, grouting with cement concrete/Epoxy, Alignment, fixing and making Good the surface complete in all respect | |||||
| 2Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame of M.S. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge. 16.66.1 Mandatory/Regulatory sign boards of 900 mm diameter with part as length of 3750 mm | |||||
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.03 MB
BOQ_996026.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid