REPAIR TO DRAINS HARDSTANDING PATH INTERLOCKING TILES CHEQURED TILE BABY WALL SECURITY WALL COMPOUND WALL GATES CHAIN LINK FENCING, RETAINING WALL AT VARIOUS LOCATION FODC INS ABHIMANYU NAI SO K AND VARIOUS OTHER

Amount

Notes : - (i) The is at Serial No 55 of TPP 2025-26 (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department. The Unit Rate quoted in r/o Ser item No 1.0 to 1.56 are deemed to include for the following and nothing extra will be paid for these works: 1. Supplying, erecting and use of scaffolding upto required height (max 25 to 30m) or upto 8th floor height with necessary H-frames, pipes, couplers, buckles, bracing, top platform with support railing at top etc. at all levels of building including carriage of the materials to the location, erecting, fixing the scaffolding and dismembering the same after working and taking away the scaffolding materials etc. complete as per direction of Engineer-in-charge. 2. Supplying, erecting & use of temporary bamboo scaffolding around the building as required. The scaffolding is to be secured properly in position by bracings, ties clamps, etc. complete including providing and erecting working platform at all heights as required, including removal after completion of work all as per direction of Engineer-in-Charge

Demolition of stone/brick masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings dressed stone work and pre cast concrete articles complete all as specified and directed.

All as per BOQ Serial item No 1.01 above but pre-cast concrete block walling complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15cm thick below or above ground level complete all as specified and directed. .

Demolition of reinforced cement concrete of any description and in any position (below and above ground level) not otherwise specifically provided for including reinforcement cut to required size to facilitate demolition complete all as specified and directed.

Dismantling of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed.

Dismantling posts or struts (Wood, steel or RCC) of any section, including taking out embedded portion and making good disturbed ground (posts embedded in concrete, brick work, masonry work, etc) complete all as specified and directed.

Dismantling fencing wire mesh any type complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided incl doors, gates, etc complete all as specified and as directed

Racking out joints/ pointing of cement / cement lime mortar to random rubble or polygonal rubble uncoursed or brought up to courses complete all as specified and directed.

M&L for cement concrete type D-2 1:4:8 using 40mm graded crushed stone aggregate as in foundations, fillings & mass concrete etc complete all as specified and directed.

M&L for cement concrete type B-2 1:2:4 using 40mm graded crushed stone aggregate as in surface channel or drain complete all as specified and directed.

M&L for cement concrete type B-1 1:2:4 using 20mm graded crushed stone aggregate as in roof kerbing, or mud stops, rounded or chafered on edges and all around of chequered tile complete all as specified and directed.

M&L for cement concrete type C-1 1:3:6 using 20mm graded crushed stone aggregate in coping bed black ,in plinth protection etc including necessary form work complete all as specified and directed.

M&L for cement concrete C-2 1:3:6 using 40mm graded crushed stone aggregate stone aggregate as in foundation, filling and mass concrete, in fencing pole complete all as specified and directed.

M&L for 100mm thick cement concrete type B-2 1:2:4 using 40mm graded crushed stone aggregate as in path/floor finished fair even and smooth without using extra cement, laid in alternate panels of size not exc 4 sqm each including bitumen filling in joints complete all as specified and as directed.

M&L for 20mm thick Wearproof topping (incorporating approved metallic floor hardner to be measured & paid seperately as "supply only") as per manfacutre's instruction, laid on concrete floors and pavings and path, and finished even and smooth complete all as specified and directed. (Note:- Metallic hardender & glass strips shall be measured and paid separately).

Supply only 22 mm wide and 3 mm thick glass dividing strips as laid in floor complete all as specified and directed.

Supply only metallic hardner mix with cement concrete as per manufactures instruction complete all as specified and directed (Make : DR. FIXIT PIDE PROOF LW, FOSROC or equivalent as approved by GE)

M&L for pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width in type B1 (1:2:4) using 20 mm graded stone aggregate and setting in mortar (1:6) complete all as specified and as directed

M&L brickwork with sub class 'B' bricks , straight or curved on plan exc 6m mean raidus built in cement mortar 1:6 complete all as specified and directed

All as per BOQ Serial item No 1.20 above but except bricks Note:- Serviceable bricks obatined from BoQ srl item No. 1.01 shall be after cleaning etc.

M&L for walling of random rubble, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

All as per BOQ Serial item No 1.22 above hereinbefore but except stone. Note:- Stone obtained from BoQ Serial item No 1.01 shall be reused.

M&L for raised pointing to random or polygonal rubble masonry uncoursed or brought upto course in CM (1:4) complete all as specified and directed.

M&L for raised pointing to precast concrete block masonary in CM (1:4) complete all as specified and directed.

Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries as directed to a distance upto 500m complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work /concrete surfaces ,finished even and smooth without using extra cement complete all as specified and directed.

Preparation of new or previously untreated surfaces of any description & M&L for applying two coats of acrylic (antifungal) exterior grade paint over one coat of primer on wall/roof complete all as specified and directed

Supply only liquid water proofing compound as per manufacture instructioncomplete all as specified and directed.

Excavating in post holes (or similar holes) in any type of soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire mesh, etc.; flat iron fillets( for securing wire mesh etc.) including all necessary drilling, bolting or riviting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

S&F mild steel screw bolts (machine made) in any type of soil with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square but, length of boltexc 5cm but n exc 10cmlong.(Diameter of neck in 11 to 15 mm) complete all as specified and directed

S&F mild steel security chain link fencing mesh size 60mmx60mm with PVC coated mesh made out of 2.5 mm dia MS wire and 1.50mm thick PVC coating complete all as specfied and directed.

S&F Galvanized 2 stand Steel Barbed wire 2.24mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standerd rails, straining bolts,including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc including taking down of existing barbed wire (each line wire to be measured) complete all as specified and directed.

Restriaining resecurig including making good staples or tighting of cross wire galvanised barbed wire in any dia of wire or any spacing complete all as specified and directed.

Taking down and refixing in same position after replaing of damage of fencing post concertina coil any dia reinforced punched(chrome razor or blade wire with barbed top of 0.5mm thick galvanised sheet and core wire of dia 2.5mm of high tensile steel wire incuding galvanised MS staples/Clips for tying at crossing complete all as specified and directed.

S&F galvanized concertina coil directed by Engr-in-Charge reinforced punched(chrome razor or blade wire) with barbed top of 0.5mm thick galvanised sheet and core wire of dia 2.5mm of high tensile steel wire incuding galvanised MS staples/ Clips for tying at crossing including taking down of existing concertina coil complete all as specified and directed

Taking down existing angle iron hold fast, etc from wall embedded in PCC and refixing in the same opening/position using suitable PCC 1:2:4 type B1 complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

S&F mild steel round bars 10mm dia and over, as in horizontal support for chain link straining of fencing including cut to length, bent to shape required including cranking, bending spirally for hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E-250) complete all as specified and directed.

S&F Bands, straps,supports or stays for rainwater, ventailing pipes, including bolts, if required hooks, heavy, for large gates, hook and pintle hinges; large hasps and stables; chains, hand made sliding bolts; clamps; hold fasts; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde -165. complete all as specified and directed.

S&F mild steel works as in doors or gates (ornamental type) of angle or other sectons with gusset plates, rails, braces etc complete drilled, welded etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and directed.

S&F Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and or riveted, or forged into spikes framed guard bars; barred iron doors, laddrs, framed balusters walk ways railings, frame work of water tank and similar work conforming to Fe- 290. Gde-E-165 complete all as specified and directed

M&L for welding, exc 2.5 cm but n.exc 5 cm in length thickness of metal to be welded exc 20mm but n.exc 25mm complete all as specified and directed.

M&L for running welding exc 20mm but n ecx 25mm complete all as specified and directed.

Preparation of new steel surfaces of any description over 10cm in width or girth, and M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Preparation of old painted steel surfaces of any description not otherwise described, over 10 cm width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed..

Taking down old paver blocks any shape, size and thickness from the existing surface and refixing at the same place after levelling the ground by using sand caushion for maintaing camber and slope complete all as specified and directed.. Note:- Sand Cushion shall be measured and paid seperately.

M&L Chequered cement concrete tiles 300x300x25mm thick, set jointed and pointed in near cement slurry in floors with gray cement and pigments in any colour machine pressed glazed , over & including cement screed bed 15mm thick cement motor 1:6 acomplete all as specified and directed..

M&L for 60 mm thickness Machine pressed precast concrete inter locking paver block glazed coloured upto 6mm on top in any shape and size , strength not less than M-35 Grade all as directed by Engr-in-charge

M&L for 80 mm thickness Machine pressed precast concrete inter locking paver block glazed coloured upto 6mm on top in any shape and size , strength not less than M-40 Grade all as directed by Engr-in-charge

M&L for machine cut broken stone or boulders of gauge not exc 63mm as in hard core n exc 150mm thick spread and levelled including watering & ramming complete all as specified and directed..

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed..

M&L for 20 mm thick Granite (of any type) tiles machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with & including over 20 mm thick Cement motar 1:4 complete all as specified and directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone with & including grinding and polishing over 10 mm thick cement mortar 1:4 complete all as specified and directed.

M &L precast cement concrete in type B-1, 1:2:4 (20 mm graded aggregate) as in Kerb stone including weathering,slightly rounded or chamfered angles including form work all as directed inclusing fixed in cement mortar 1:4.(Size of kerb stone as directed by Engineer in charge) complete all as specified and directed.

DIGITAL SERVICES (BID ID -3337668)

M.K Enterprises (BID ID -3337813)

Mahadev Enterprises (BID ID -3337473)

K N CONSTRUCTION (BID ID -3337875)

venus enterprises (BID ID -3337296)

D.N.PATIL (BID ID -3337082)

LAXMI ENTERPRISES (BID ID -3337498)

kalakriti enterprises (BID ID -3338033)