REPAIR MAINTENANCE AND IMPROVEMENT OF MAIN DISTRIBUTION BOARDS, SERVICE CONNECTION, SUBMAIN WIRING, BLDG SECURITY LIGHTS, BLDG EARTHING AND CONNECTED WORKS AND REPAIRS, MAINT AND IMPROVEMENT TO CERTAIN B/R ASSETS AT E/M INSTALLATIONS AND ALLIED WOR

Amount

B&R Part

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area not exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area exc 1.5 Sqm but n exc 4.00 Sqm each complete all as specified and as directed.

S&F Pressed steel frame for doors of size 125 X 60 mm frabicated out & 1.25 mm thick sheet with one or more rebates including necessary fixing lungs, hinges, lock strike plate, and filling with cement concrete 1:3:6 type C-0 (using 12.5 mm graded stone aggregate) etc, making good the disturbed surface complete all as specified and as directed.

S&F Pressed steel frame for doors of size 105 X 60 mm fabricated out & 1.25 mm thick sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, and filling with cement concrete 1:3:6 type C-0 (using 12.5 mm graded stone aggregate) etc, making good the disturbed surface supplied and fixed complete all as specified and as directed.

Dismantling/demolition of brickwork or stone boulder masonry built in cement mortar including all quoins, arches, pillars etc, complete all as specified and as directed.

M & L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6.0 metre mean radius as wall built in cement & sand mortar 1:6, complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, concrete surface etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for rendering 15 mm thick in cement and sand mortar 1:4 on other than fair faces of brick work or cement concrete surfaces including finishing the surface even and fair, complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even & smooth without using extra cement,complete all as specified and as directed.

M&L for rendering 5 mm thick in cement and sand mortar 1:3 on fair faces of concrete surfaces as in ceiling including finishing the surface even and smooth without using extra cement, complete all as specified and as directed.

M&L for prepration of newly plastered surface of walls providing 1mm thick wall care putty and applying two coat of distemper oil emulsion including over and including a coat of alklai resitant primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and as directed.

M&L for preparation of new plastered or old plastered surfaces of wall including cornices, pilasters etc and applying two coat of cement based paint of approved colour on wall Surface including all necessary arrangement for execution of work, complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded in natural ground and making good disturbed area complete all as specified and as directed.

Dismantling galvanised 2 strand, steel barbed wire, concertina coil in fencing complete all as specified and as directed.

Excavation in post hole (or similar hole) each n exc 0.5 cum each and getting out, returning filling in and ramming earth or broken rubble mixed with earth around,in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed.

M&L for cement concrete type C2 1:3:6 (using 40 mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.

S&F Mild steel work as in hand rails , half round or other section, balusters running bars, nosing to steps, wind ties, posts and struts in fencing incl cutting tops to shape as required, drilling holes , noching for wire , flat iron fillets for securing wiremesh etc. incl all necessary drilling, bolting or riveting etc & similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F mild steel round bars 10mm dia cut to length, bent to shape required bent to shape hoking end required and fixed in fencing confirming to Fe 410-W (Gde E-250) or Fe 290 (Gde E-165) complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long complete all as specified and as directed.

Supply only chain link having MS galvanised wire and mesh of size 50 mm x 50 mm complete all as specified and as directed.

Fixing only chain link fencing including line wire any mesh, size and tied to any type of standards, rails, straining bolts etc including provision of binding wire. complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (Below or above ground level) complete all as specified and as directed.

M&L 75mm thick cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) as in sub floors, sub bases, floors and paving etc. complete all as specified and as directed.

Supply and laying 60mm thick factory made chamfered edge cement concrete interlocking paver block of M-35 grade confirming to IS 15658-2006 with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over minimum 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as specified and as directed.

M&L for machine factory made PCC block (1:2:4) type B1 using 20 mm graded stone aggregate, as in kerb stone of size 300 x 300 x 450 mm set in cement mortar (1:4), complete all as specified and directed.

M&L for Chequred Cement concrete coloured tiles with grey cement and pigments 30cm x 30cm x 25mm thick, machine pressed, set jointed and pointed in neat cement slurry in floors, laid over and including 20 mm thick screed bed in cement mortar 1:6 all as specified and as directed.

M&L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggrgate) laid in panels ,finished even and smooth with using extra cement complete all as specified and as directed.

M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection/path laid in panel surface finished even and fair without using extra cement complete all as specified and as directed.

Dismantling asbestos cement/galvalume/fibre (corrugated or semi corrugated) sheets including ridges in roof coverings, complete all as specified and directed..

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in ridges/valley gutters, fixed with self tapping screws, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

Dismantling timber scantlings (framed work) exc 40 Sq Cm in section, in any position complete all as specified and directed.

S&F rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, gate, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections, MS hollow pipe) including distance pieces, cleats etc. conforming to Fe-410W Gde E-250 quality 'A', complete all as specified and directed.

M&L for preparation of new steel and iron surface of any description and applying 2 coats of syntheltic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

M&L for preparation of new wooden surface of any description and applying 2 coats of syntheltic enamel paint over a coat of pink primer, complete all as specified and as directed.

Dismantling/Demolition wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L for providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint for all hights complete all as specified and as directed.

M&L for 4 mm thick prepainted designer non-asbestos fibre cement building board and fixed on false ceiling grid with screws complete all as specified and as directed.

S&F in repair for hollow PVC wall panelling 10-12 mm thick of Sintex pattern SPUF- 146 or equivalent , fixed with PVC plug and screw and inserted to next panel groove, edges and corners of all door/ window/openings etc to be covered with PVC angle fixed with solvent cement complete including all necessary frame work complete all as per manufacturer's instructions complete all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawings.

Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 2nd class hard wood plain framed paneled shutter 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board upto commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated (Factory made shutters).

S&F 2nd class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc divided into squares by Rails and styles , with plain chamfered or rounded mitered and rebated size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete.

S&F of 30-35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels,one face is covered with decorative face veneer with lipping/frame to match

S&F galvanised ms wire cloth 0.56mmm nominal dia of wire and average width of aperature 1.18mm complete.

S&F 100mm size SS butt hinges (ISI Marked) complete all as specified.

S&F Aluminium alloy, anodized, sliding door bolt (ISI Marked) of 300mm with hasp & staple (Bolt type) and fixing clips of sheets, coat or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete.

S&F 150 mm alluminium, anodized, barrel tower bolts extruded section & fixed

S&F 150mm size extruded aluminium alloy handles, fabricated type anodized complete.

S&F in repairs of Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg Aluminium (extruded section) body

M&L for Powder coated aluminium frame (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with requiredEPDM rubber/ neoprene gask etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainlesssteel screws, all complete Engineer-in-Charge.

M&L for powder coated aluminium window and ventilator shutters (powder coating shall not be less than 50 microns of approved colour) side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 no.). hinges type B-21 100 mm long (2 No.s), suitable handle (1 no.), sliding bolt size 100 mm long (2.0 No.s), complete all as specified and as directed.

Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size, floor door spring, aluminium door seal & lock, door stopper, mortice lock (2-lever), all as specified below complete all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021) (b) Vertical Members of shutter Section shall be be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be be of size 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section shall be be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370).

S&F 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium beading exc. 0.5 square metre in each pane complete all as specified and as directed.

M&L for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around theopening, all complete as per requirement and direction of Engineer in-charge.

S&F for stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete as specified and as directed.

S&F in repair steel rolling shutters, with/without ball bearing as specified including top cover, anchoring rod, hasp & staple,safty lever lock, erected in position as indicated complete, mannual /gear operated type with chain wheel & hand chain thickness of laths 1.00 mm complete all as specified & directed.

M & L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed.

Taking up or down 15mm bore steel tubing medium grade and connections, as in walls, ceiling, floor etc including cleaning for re-fixing or credit to the work

-ditto- all as above but 20 mm bore

Supplying and laying of CPVC pipes 20 mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings in wall/floor etc complete all as specified

Supplying and laying of CPVC pipes 25 mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings in wall/floor etc complete all as specified

S& F in repair 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/wall complete all as specified and as directed

S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/wall complete all as specified and as directed

S&F in repair PVC floor trap of 75mm outlet dia, with CP grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4)

M & L for preparation of new/old surface and applying two coats of 100% premium acrylic exterior emulsion paint having VOC less than 50 gm/litre & excellent protection against UV, Alkali & Fungal resistance, exterior paint of required shade (Company Depot tinted) with silicon additives @ 1.43 litre/10 Sqm over and including 2 mm thick wall care putty and priming coat of exterior primer applied at 0.90 litre/10 Sqm over new surfaces upto tripple storey with fully utomatic airless spray machine of paint application having an electric motor of min 1 HP with a flow speed of min 1 ltr per min having pressure 3300 PSI. Allow 6-8 hours to dry the surface of both coat of paint to achieve excellent application with 5 years perfomance warranty from manufacturers and instruction complete using limited man power including scaffolding, trestles, ladders, cradles and necessary safety measures for upto triple storey buildings, complete all as specified and directed.

M & L for preparation of new / existing old surface and applying two coat of Oil bound distemper over a coat of primer & over a coat of 2 mm thick wall care putty on old plastered surface using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr.The machine should should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper shold be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises compete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick laid over and including 20mm screed bedding in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar etc jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 10mm thick rendering in cement mortar 1:3 complete all as specified and as directed.

M&L for 25 mm average thick cement concret type- B0 1:2:4 (using 12.5 mm graded stone aggregate) as leveling course in floor compete all as specified and as directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 complete all as specified and as directed.

M&L for coloured Ceramic tiles 10 mm thick (square/ rectagular) polished, area of each tiles not exceeding 0. 36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 a complete all as specified & directed.

M&L for Glazed ceramic coloured tiles in vertical surface of size 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in cement motar 1:4 complete all as specified and as directed.

S&F in repair 750 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) having monkey protection cover hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 20mm bore dia iron pipe complete all as specified and as directed.

S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete, including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC Flush pipe complete including jointing to socket of flushing rim complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including Plastic water closet seat cover, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm excluding taps waste chain and plug including bracket complete all as specified and as directed.

S&F in repair Vitreous China bowl urinal flat back, half stall type, white , of size 375x390x590 with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

S&F PVC connection 15mm size with PTMT nut of length 600mm complete as specified and as directed.

S&F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed.

S&F in repair bib taps cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipes complete all as specified and as directed.

S&F in repair angular cock cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipes complete all as specified and as directed.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore dia iron pipe complete all as specified and as directed.

E/M Part

Taking down carefully aluminium / copper point wiring (light, fan, socket any type, power, bell etc.) complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator, light fittings etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as directed. (Note: Credit for above items should be made as per credit Schedule separately).

Taking down carefully by Submain wiring of any type complete and making good disturbed sufaces to match with the existing surfaces all as directed by Engineer-in-Charge.

Taking down old unserviceable existing SPN/TPN DBs / enclousers any size and type / any descriptions as iron sheet scrap including MCB any type / size and making good disturbed surface / wall as per existing complete all as specified and directed.

M & L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, 1100 volts grade copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) including with modular flush metal boxes with modular cover plates & frame for mounting modular switches, sockets, regulators etc or including sunk cast iron /pressed steel/terminal boxed for mounting flush type switches/sockets etc with 3 mm thick phenolic laminated sheet covers and including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour complete all as specified in current SSR Part-I & II & directed by the Engineer-in-Charge as described below from item no 94 to 98:-

a) One light/ fan point controlled by one way switch 5 amp complete.

b) One 3 pin 5 Amps socket point controlled by one way switch on same board.

c) One 3 pin 5 Amps socket point controlled by one way switch on independent board.

d) One bell point controlled by one push button.

e) One light point controlled by two 2-way switches.

All as per item No. 93 but for 3 pin / 5 pin 16 Amps sockets outlet with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent Point wiring complete all as specified and as directed .

Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete.

Supply and Fixing Modular bell Push switch 6 Amps with indicator single pole one-way, 1 Module.

Supply and Fixing Modular switch 16 Amp single pole one way,1 Module all as specified.

Supply and Fixing Modular fan Regulator electronic step type complete all as specified.

Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps , combined 2 Module complete.

Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete.

Supply and Fixing Modular switch 6 Amps single pole two-way, 1 Module complete all as specified.

Supply and Fixing in replacement switch piano type, SP, one way, flush type 5 Amps complete all as specified.

Supply and Fixing in replacement socket out let 2 in 1 flush type 5 pin 5 Amp complete all as specified.

Supply and Fixing in replacement socket out let 2 in 1 flush type 3 pin 5 & 15 Amp complete all as specified.

Supply and Fixing in replacement switch piano flush type 15 Amp, SP, 240 volt, one way complete all as specified.

Supply and Fixing in replacement bell push siwtch piano flush type, SP, one way, 5 Amps complete.

Supply and fix in replacement ceiling rose surface bakelite 65mm x 50mm three terminals complete.

Supply and fix in replacement lamp holder, PVC / polycarbonate type with back plate.

Supply and fix in replacement mini MCB enclosure including DP 16 amp, type 'C' curve complete.

Supply and fix in replacement Bell Ding dong type, 230 Volts complete with connection.

Supply and Fixing in replacement fan Regulator piano flush type (Socket type as per existing), electronic step type complete all as specified.

M & L for Sub Main Wiring wiring with two runs single core 4 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) with and including 4 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge.(Note: Two runs of 4 Sq mm (P&N), one run of 4 Sq mm earth wire & One run of PVC casing and caping will be measured as one RM).

All as per Item No 117 but for 10 Sqmm

Supply & fix in repair indoor decorative ultra slim surface /Wall mounted LED batten tube light complete fitting 1x 20 watt LED Tube fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repair indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1x10 watt LED Tube fitting (size within 600x25x40 mm) suitable for mirror light with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K,>100Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

S&F in repair surface mounted bulk head LED light fitting, capacity 10 watt, opal diffuser, IP 65 protection complete with all accessories and connection complete all as specified and as directed. Make: Bajaj Cat part BIBWP10W LED or equivalent in Philips / Havells / Wipro

Supply and fix LED 9 W suitable for normal holder (Base Cap B22 / E14) complete all as specified.

Supply and install in replacement of 30W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainable with heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- related colour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF ≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280V including all connections complete all as specified.

Supply & fix in repair recess type, 35/36 watt LED panel light (600x600 mm) complete with fittings integrated electronic driver,energy efficient, 230 volts,co- related colour temperature (CCT) of 6500K, complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

S&F in repair LED bed side light fitting, 3 watt, wall mounted with adjustable arm, On /Off inbuilt switch including connection complete. Make : Havells or equivalent to Philips / Bajaj / CG or as directed as per site

S&F in repair indoor wall mounted fitting, brushed nickel finishfixture with opal glass diffuser, with LED retrofit bulb of capacity 09 watts complete Make: Havells cat part No LHFOAJE1TZ1I060

S&F in repair LED post top light fitting 30W IP-65 rated completeall as specified and directed. Make: Surya Cat part No SLE PT 30W-ETPP or equivalent.

S&F in repair LED Round/square recess mounted slim downlighter 12 watt, integrated electronic driver, co- related colour temperature (CCT) of 6500K complete all as specified.

All as per Item No 128 but for 18 Watt

M&L for building security light bracket made out of 40mm dia light grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole/wall including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including two coats of aluminium paint over a coating of red oxide primer complete all as directed taking down old unserviceable bracket as scrap any size / description.

S&F in replacement MCB distribution board, SPN 12 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified.

All as per Item No 131 but for 8 Way

All as per Item No 131 but for 4 Way

Supply & fix in replacement MCB SPN 63 Amps,' C' series , bracking cap10KA, 240V complete.

Supply & fix in replacement of MCB SPN 40 Amps,' C' series , bracking cap 10KA, 240V complete.

Supply & fix in replacement of MCB SPN 6-32 Amps,' C' series , bracking cap 10KA, 240V complete.

Supply & fix in replacement of MCB SP 6-32 Amps, ' C' series ,bracking cap 10KA, 240V complete.

Supply and fix in replacement SP enclosure with a two pin and earth plug and socket complete with SP MCB of rating 20 Amps, 240 Volts with all connection complete all as specified and directed Make : Havells or equivalent of Legrand /L&T/ C&S

Supply & fix in replacement metal clad SPN plug top 20 Amp for fixing on AC Box complete.

Supply and fix modular MCB DP 16 Amp, ' C' series, 240 V complete all as specified and directed.

S&F in repair Plastic Surface mounting box 1 / 2 module gang box for mounting switches, sockets, fan regulator etc complete all as directed by Engineer-in-charge.

S&F in repair Plastic Surface mounting box 3 / 4 module gang box for mounting switches, sockets, fan regulator etc complete all as directed by Engineer-in-charge.

S&F in repair Plastic Surface mounting box 6 / 8 module gang box for mounting switches, sockets, fan regulator etc complete all as directed by Engineer-in-charge.

Supply & replacement of 3 mm thick laminated mica sheet top cover suitable for switch board 3 way to 6 way including removing & re-fixing of existing switch / socket and complete connection all as directed. Note :- Replacement of unserviceable switch / socket / regulator shall be measured & Paid separately

Supply & replacement of 3 mm thick laminated mica sheet top cover suitable for switch board 8 way to 12 way including removing & re-fixing of existing switch / socket and complete connection all as directed. Note :- Replacement of unserviceable switch / socket / regulator shall be measured & Paid separately.

M&L for Modular metal flush box 1/2 Module complete all as specified and directed.

M&L for Modular metal flush box 3 Module complete all as specified and directed.

M&L for Modular metal flush box 4 Module complete all as specified and directed.

M&L for Modular metal flush box 6 Module complete all as specified and directed.

M&L for Modular metal flush box 8 Module complete all as specified and directed.

M&L for modular white cover plate with frame, 1 / 2module complete all as specified and directed.

M&L for modular white cover plate with frame, 3 module complete all as specified and directed.

M&L for modular white cover plate with frame, 4 module complete all as specified and directed.

M&L for modular white cover plate with frame, 6 module complete all as specified and directed.

M&L for modular white cover plate with frame, 8 module complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm (nominal area) FRLS PVC insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through and including PVC Casing and Caping and its all accessories of suitable size on wall/roof surfaces ( making good all to the disturbed surfaces as per existing) including one run of 1.5 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing including gang box / 2.0mm thick MS terminal box as per site requirement for fixing switches, sockets, fan regulators etc fixed to wall with 3mm thick laminated sheet top cover complete all as specified for item no 157 to 159:-

a) One light point/ fan point / bell point controlled by one switch

b) One 3 pin 5 Amps socket point controlled by one way switch on same board.

c) One 3 pin 5 Amps socket point controlled by one switch on independent board

All as per item No. 156 here-in-before but with 4.0 Sqmm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4.0 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement switch piano type , SP, one way, flush type 5 Amps complete all as specified.

Supply and fix in replacement socket out let 2 in 1 flush type 5 pin 5 Amp complete all as specified.

Supply and fix in replacement socket out let 2 in 1 flush type 3 pin 5 & 15 Amp complete all as specified.

Supply and fix in replacement switch piano flush type 15 Amp, SP, 240 volt, one way complete all as specified.

Supply and fix in replacement fan Regulator piano flush type, electronic step type complete all as specified.

Supply and Fixing in repair modular switch 6 Amps single pole one-way, 1 Module complete.

Supply and Fixing in repair Modular switch 16 Amp single pole one way,1 Module all as specified.

Supply & Fixing in repair modular fan Regulator electronic step type complete all as specified.

Supply and Fixing in repair modular socket 2-in-1, 5 pins 6 Amps , combined 2 Module complete.

Supply and Fixing in repair modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified.

S&F in repiar Modular AC Box Plastic enclosure, heavy duty with single pole MCB 20 amps 'c' series and plug top complete as directed. Make: Anchor Cat part No 98488 or equivalent

Supply & fix in replacement of indoor wall mounted fitting, brushed nickel finish fixture with opal glass diffuser, with LED retrofit bulb of capacity 09 watts-02 Nos all as directed at site. Make:-Havells Cat Part No. FLORETINE WL 2LS B22 SS or equivalent make in Crompton/ Philips C&S.

Taking down carefully service connection of any type complete all as directed by Engineer-in-Charge.

Excavation in trenches in soft/loose soil not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide for laying of cables and getting out all as specified and as directed by Engr-In-Charge.

Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified.

Returning, filling in including spreading, levelling,watering and well ramming excavated soil in layers not exceeding 25 cm thick each , filling back in trenches after cables have been laid and tested complete all as specified.

Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor laid in trenches / duct / fixing on walls / poles or passing through HDPE double wall corrugated pipe (outer dia should not be less then 40 mm) including connecting with suitable lugs, glands, nuts and bolts in existing Panel from pole / Main Panel Box and testing complete all as specified and directed of following sizes of item no 178 and 179 :- Note:- HDPE pipe rate shall be deemed in quoted rate above.

LT XLPE cable size 10 sq mm 2 core

LT XLPE cable size 16 sqmm 4 core

Supply & fixing powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted, triple pole and neutral 4 way with 100 Amps rated copper bus bar, type complete all as directed.

Supply & fix in replacement of MCB TPN 40 to 100 Amps,' C' series , bracking cap 10KA, 415V complete including taking down old MCBs all as specified and directed.

S&F TP&N Vertical Loadline distribution board, 4 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail ,blanking Plates, cable ties for cable management, 440 V, 4 way complete all as specified including fitting suitable for MCBs with connections complete all as specified and directed. Note : -MCB & MCB /MCCB DBs shall be of same make and measured and paid seperately under respective items of Sch A. DB shall be fixed in flush pattern by cutting the wall and making good disturbed surface as pe directed & rate shall be included in the items.

Supply & fix in replacement of MCCB 250 Amps, thermal magnetic based adjustable type, breaking cap 36 KA, 4 Pole, 415V complete including taking down old MCBs all as specified and directed.

Supply & fix in replacement of MCCB 160 Amps, breaking cap 25 KA, 4 Pole, 415V complete including taking down old MCBs all as specified and directed.

Supply & fix in replacement of MCCB 125 Amps, breaking cap16 KA, 4 Pole, 415V complete including taking down old MCBs all as specified and directed.

S&F in repair driver suitable for existing LED panel light fittings, 36 watt as directed.

S&F in repair driver suitable for existing LED down light fittings 15 watt as directed.

S&F in repair driver suitable for existing LED bed side light fittings 03 watt as directed.

S&F in repair/ replacement High Bay LED Light of 70 watt complete all as specified & as directed

Earthing complete all shown as electrical plate No -03 of MES Sch part -I as specified and as directed including the following:- (i) GI earth plate of size 60x 60cm x6.0mm thick burried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.50 metres below ground level. (ii) Earth plate surrounded by and packed with charcoal and common salt in alternative layers. ( n.exc 15 cms each layer) (iii) 4 mm GI wire from earth plate to MCB DB/machinery including necessary GI bolts, nuts check , washers, thimbles etc. (iv) 20 mm bore, light grade, Gi pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontaly to the earth pit. (v) 15 mm dia bore G. I. medium grade pipe for protection of earth wire. (vi) Cement concrete chamber of PCC (1:3:6) type C-2 using 40mm graded stone aggregate. The chamber shall be constructed one metre away from edge of earth pit. (vii) 50 mm thick precast cover of reinforced cement concrete(1:2:4) type B-1 using 20mm graded stone aggregate with steel rainforcement 8 mm dia mild steel TMT bar @ 10 Cm c/c both ways and MS angle iron 50x50x6mm frame including two coats of painting over a coat of red oxide to exposed steel surfaces with suitable handle to lift the cover. (viii) Excavation in soft/loose soil, returning filling & removal of surplus soil to a distance of 50 m as directed.

Taking down ceiling fans / exhaust fans / fresh air fans of any make and type and rectifying the defects including replacement of unserviceable parts and testing and reinstalling at same or any other location as directed at site by Engineer-in-charge. Notes: - (i). The unit rate is deemed to include the cost of taking down carefully fans from existing position, any location in the AOR of AGE E/M office after disconnecting electric connections, sealing cable ends, bringing to MES store yard and refixing in same as different locations after repair/painting work etc complete all as directed by Engineer-in-charge. (ii) Cost of major items such as ball bearing, gun metal bush, capacitors, canopy, blades and repair/ rewinding /painting etc shall be measured and paid separately under relevant item of this schedule as supply only. (iii) Minor items or works like tightening loose connections in switches, binding insulation tape to the naked wires, replacement of unserviceable clamps, connector, nuts and bolts, split pins, rubber reel, washers, greasing, including flexible twin core copper wire of suitable size from existing ceiling rose to fan etc. complete will be provided by the contractor without any extra cost to the department and cost of these minor items or works will be deemed to be included in the quoted rates against this item and nothing extra shall be paid on this account.

Material and labour for spray painting on ceiling fan (size 1200 mm / 1400 mm) with two coat complete with synthetic enamel paint by spray gun including filling cavities with filler, after cleaning all dusts including writing of MES Nos in black paint all as directed by Engr-in-Charge.

Dismantling of worn out / burnt out windings of ceiling fan and re-winding the motor of ceiling fan with super enamelled copper wire of existing gauge, varnishing with approved quality insulating varnish complete including replacement of split/safety pins, locking nut, check nut and testing for original and consumption complete for size 1200 mm sweep.

Dismantling of worn out / burnt out windings of exhaust fan / fresh air fan any type and re-winding the motor with super enamelled copper wire of existing gauge, varnishing with approved quality insulating varnish complete and testing for original and consumption complete for following sizes of item no 195 to 197:

150/200/250 mm sweep

300 mm sweep.

450 mm sweep.

Supply only capacitors 2.5 MFD suitable for all types of fans complete all as directed by Engr in Charge. Make: - Usha, Universal, Epcos.

Supply only capacitors 4.0 MFD suitable for all types of exhaust fans complete all as directed by Engr in Charge. Make: - Usha, Universal, Epcos.

Supply only ball bearing suitable for ceiling fan/exhaust fan/fresh air fan of any type as per existing required including proper alignment of shaft and testing complete all as directed by Engr in Charge.

Supply only bush made out of Gun metal suitable for ceiling fan/exhaust fan/fresh air fan as required at site all as directed by Eng in Charge.

Supply only down rod MS grade 15 mm bore of length upto 90 cm suitable for ceiling fans of any type and size including cutting, drilling holes, making thread and painting complete all as directed.

Supply only ceiling fan blade of type and make as existing or as directed at site of size 1200 mm sweep

Supply only exhaust fan motor suitable for 8'' to 10'' PVC ventilator/ fresh air fan, copper winding, 230V, 50 Hz , as per existing make with fixing accessories to mount on frame complete all as directed Engr-in-Charge.

Supply and fixing in replacement of fresh air/ ventilator fan made of sturdy engineering plastic with buil in louvers, AC, 230Volt single phase, 50 Hz, incl depositing the old one in MES store yard complete of following sizes for item no 206 to 208 :-

150 mm Sweep.

250 mm Sweep.

300 mm Sweep.

Taking down of unserviceable ceiling fan any type and size with down rod, blade complete and supply and fixing ceiling fan AC 230 Volt single phase five star rating and fixing accessories complete of 1200 mm sweep incl depositing the old one in MES store yard complete all as directed by Eng-in-charge.

Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) incl depositing the old one in MES store yard complete all as directed by Engr-in-Charge.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and Louvers incl depositing the old one in MES store yard complete of following sizes :-

S&F in repair casing caping of size 25 mm & length 2 Meter of each piece, complete all as specified and directed by Engr-in-charge.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN 40 To 100 AMP four poles and current carrying capacity in the DB complete with connection testing and commissioning.

M/s RCC (BID ID -3467031)

M/s M S CONSTRUCTION (BID ID -3462023)

Karman Infra Projects (BID ID -3461789)