SPECIAL REPAIR TO BLDG NO P-05 (SINGLE JCOS ACCN) AND P-06 (JCO MESS) IN IHQ OF MOD (ARMY) CAMP UNDER GE (SOUTH) DELHI CANTT-10

Amount

Taking down chowkhat or frame with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.

Taking down chowkhat or frame with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed.

S&F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube in opening complete all as per specifications, drawings and as directed.

S& F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20 mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site complete all as per specifications, drawings and as directed.

S&F factory made 2nd class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass / gauze etc. ( with or without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) complete all as specified and directed.

S&F factory made 2nd class hard wood 35 mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 100 mm Butt hinges medium weight of stainless steel complete all as specified and directed..

S&F 75 mm Butt hinge medium weight stainless steel complete all as specified and directed.

S&F 100 mm Butt hinge medium weight stainless steel complete all as specified and directed..

S&F stainless steel sliding bolt 300 mm long clip type, stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F stainless steel barrel tower bolt, stove enameled 200 mm long complete all as specified and directed.

S&F stainless steel handles for door oval type, stove enameled 125 mm long complete all as specified and directed.

S&F stainless steel barrel tower bolt 150 mm long complete all as specified and directed.

S&F 100 mm stainless steel handle complete all as specified and directed.

M&L for rolled mild steel frame work as in door or gates of angle or any other section complete all as specified and directed.

M&L for MS work as in hold fasts complete all as specified and directed..

M&L for cutting holes in brick wall built in CM for inserting hold fast , exc half brick but n.exc one brick making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type B-1 complete all as specified and directed.

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

M&L for 2 coats of synthetic enamel paint over a coat of pink primer on New wood or wood based surfaces not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed..

S&F Anodized Aluminum frame powder coated for doors, windows, ventilators with one or more rebates using appropriate section not less than 1.50mm thick including necessary fittings such as handle, tower bolt, door stopper, hinges glazing clips, rubber packing, anodized aluminum snap beading, screws, and joining cleat for fixing etc, complete all as specified and directed.

S&F Anodized aluminum window and ventilator shutters, powder coated fixed type without sash bar, aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws etc, complete all as specified and directed by Engineer-in-Charge.

M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or gorged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.

S & F in repair suspended false ceiling using E-Grid system of size – 600 mm x 600 mm with and including of frame work with GI powder coated angle wall runner of size 19 mm x 19 mm, cross tee of size 24x 24 mm and main tee of size 34x34 mm fitted with 15 mm thick insulated, acoustic ceiling tiles of mineral wool rock fiber, fixing with suitable fasteners & 4 mm GI wire with adjustable cleats of J hook including making provision for housing light fitting, AC grid etc complete all as specified and directed.

M&L for 20 mm thick granite ( of any type ) work table rubbed and polished I cooking platform , shelves and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite over and including 20 mm thick cement screed in Cement mortar 1:6 complete all as specified and directed .

Dismantling boarding any description fixed in any position with screws complete all as specified and directed .

S&F in repair 18 mm thick prelaminated MDF ( medium density fibre ) board interior grade prelaminated both sides with decorative choice lamination for cup board including teak wood leeping all around fixed with screws to steel frame work complete all as specified and directed .

S&F hasp and staple, aluminium anodised 75 mm complete all as specified and directed .

S&F 40 mm dia cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.

S&F two legged aluminium floor door stopper with rubber shoe , complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins arches pillars etc. complete all as specified and directed .

M&L for brick work built in cement mortar (1:4) using sub class 'B' bricks old size straight or curved on plan exc 6 mtr mean radius as in repairing of existing drains/manholes complete all as specified and directed .

Dismantling of floor of toilet with WC seat & taken out the cinder from sunken portion ,taking down cement plaster of any thickness & description of wall & floor, providing 25 mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall, 15 mm thick plaster in cement mortar 1:4 mixed with WPC as per manufacturer's instructions both on floor & wall , then applying Epoxy Resin Coating polymer(water proofing coating for sunken portion )both on floor as well on wall, sunken portion filled with graded cinder & laying 50 mm thick floor in PCC 1:2:4 type B-1(using 20 mm graded stone aggregate.), floor area not exc. 3.50 Sqm including water ponding test complete all as specified and directed .

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed .

M&L for non skid coloured ceramic tiles 7 to 8 mm thick Square or rectangular area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over & Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed .

Material and labour glazed ceramic coloured tiles 300 mm x 450 mm x 7 mm thick on walls etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over & Including 10 mm thick cement mortar (1:4) screed plaster complete all as specified and directed .

S&F in repair Vitreous China, pedestal pattern wash down water closet pan, white including fixing bolts, connection to flushing cistern and flush pipe & drain pipe (or out going pipe) and to anti-syphonage pipe etc. complete all as specified and directed .

S&F in repair plastic water closet seat, white, closed pattern ( seat & cover for Pedestal pattern) with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed .

Supply and fixing in repairs vitreous china ware wash hand basins, white flat size 550 x 400 mm excluding taps but including waste coupling 32 mm dia and brackets complete all as specified and directed .

Supply and fixing in repairs PVC valve less syphonic double action type flushing cistern 10 ltr capacity, low level, white with inlet, ball valve, float and handle including brackets and connection to pipes complete all as specified and directed . Make :- Cera / Parryware/ Hindustan Sanitary Wares

S&F angle valve 15 mm bore fancy type chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed.

S&F stop valve 15 mm bore fancy type chromium plated with long shank and cup (concealed type ) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed.

S&F bib taps 15 mm bore brass chromium plated fancy high pressure screwed for iron pipe and fixed etc. complete all as specified and directed.

Supply and fixing PVC connection 15 mm dia and 45 cm long with washers complete all as specified and directed.

Supply and fixing 32 mm dia and 60 cm long PVC waste pipe for WHB complete all as specified and directed.

S&F grating doom 125 mm dia with waste hole of PTMT(minimum weight 40 gms) etc. complete all as specified and directed.

S&F brass chromium plated fancy pillar taps 15 mm, screwed down high pressure, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs brass chromium plated shower rose of size 75 mm with arms including fixing to steel pipe complete all as specified and directed.

S&F in repairs75 mm dia Cast iron floor trap with grating including jointing to waste pipe with cement joints, set in plain cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F in repair tubular towel rail brass chromium plated, 20 mm dia, ‘D’ type 60 cm long between flanges complete all as specified and directed.

S&F in repairs 6 mm thick glass corner shelf (Single shelf) of best quality with CP steel railing of size (250 mm x 250 mm) of best quality complete all as specified and directed.

S&F CP health faucet with hand shower and 1.5 mtr flexible stainless steel pipe suitable for fixing to 15 mm dia pipe complete all as specified and directed.

Dismantling and breaking up CI pipes set in CM, 100/75 mm dia including pipe fittings complete all as specified and directed.

S&F 100 mm CI soil waste and vent pipe in any length with or without ears with cement joints laid in trenches or in floor or fixed to walls complete all as specified and directed.

All as per Serial item No 55.00 here-in-before but 75 mm dia .

S&F 100 mm CI bends (any radius) diminishing pieces or taper (large base measured) complete all as specified and directed.

All as per Serial item No 57.00 here-in-before but for 75 mm bore pipe .

S&F CI cowls 100 mm complete all as specified and directed.

S&F CI 75 mm Nahani trap with grating including jointing to waste pipe fixed in cement concrete complete all as specified and directed.

S&F 100 mm bore dia cast iron branch pieces( tee, cross & 'Y' shapes) with oval access doors including cement joint, fixed on walls complete all as specified and directed.

S&F 75 mm bore dia cast iron branch pieces( tee, cross & 'Y' shapes) & oval access doors with cement joint, fixed on walls complete all as specified and directed.

S&F in repairs CI branch piece single (equal or unequal) 100 mm ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

All as per item No 63.00 here-in-before but 75 mm.

S&F holder bat clamps for 100 mm bore pipe made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stay including bolts and nuts and securing ends of stay to walls or roof complete all as specified and directed.

All as per item No 65.00 here-in-before but 75 mm.

Taking up or down 15 mm dia steel tubing and connection including fittings and cleaning for refixing or removal to store complete all as specified and directed.

All as per item No 67.00 here-in-before but 20 mm dia.

S&F GI tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 15 mm dia bore complete all as specified and directed.

All as per item No 69.00 here-in-before but 20 mm bore pipe.

Refixing old steel tubing and connections 15 mm bore in new or old position ( wall, ceiling, floors etc) complete all as specified and directed.

All as per item No 71.00 here-in-before but 20 mm bore pipe.

Dismantling water tanks exc. 500 litre & n.exc 1000 litre capacity and removing to store complete all as specified and directed.

S&F 1000 Ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Min wt. 210 gms) complete all as specified and directed.

S&F 15 mm dia gun metal gate valves with iron wheel head and brass spindle, screwed both ends to iron pipe and fixed complete all as specified and directed.

Supply and fixing in repairs 25 mm dia, mild steel, powder coated drapery rod with fixing brackets stops, side knobs etc. complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including screed bed or bedding layer of mortar 20 mm thick in CM 1:6 complete all as specified and directed.

M&L for Kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar fixed over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and dismantling existing stone complete all as specified and directed.

M&L for precast cement concrete type B0 1:2:4 (using 12.5 mm graded aggregate) jallies 50 mm thick (measured solid) including all moulding but excluding frame, set in cement mortar 1:4 complete all as specified and directed.

M&L for PCC ( 1 : 2 : 4) type B-1 as in kerbs coping paddings etc. including necessary form work complete all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key , scrubbing down with water etc. on walls and ceiling complete all as specified and directed.

M&L for 12 mm thick rendering in CM 1:6 in one coat on other than fair face of wall finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on fair face of walls finished fair even and smooth mixed with integral water proofing compound without using extra cement complete all as specified and directed. Note: Liquid WPC shall be measured and paid separately.

M&L for 5 thick rendering in CM 1:3 on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for 3 coat of white wash on walls including surface over newly plastered surface including preparation complete all as specified and directed.

M&L for 3 coat of white wash on ceiling including preparation of surface over newly plastered surface complete all as specified and directed.

M&L for preparing of new surface of walls and applying two coat of oil emulsion distemper white or tinted over a coat of primer with and including application of wall care putty to achieve even & smooth surface complete all as specified and directed.

M&L for complete removal of existing treatment from walls and applying three coat of white wash complete all as specified and directed.

M&L for preparing of new surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment from ceiling and applying three coat of white wash complete all as specified and directed.

M&L for complete removal of existing treatment from walls and applying two coat of oil emulsion distemper white or tinted over a coat of primer including application of wall care putty to achieve even & smooth surface complete all as specified and directed.

M&L for complete removal of old surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for one coat of synthetic enamel paint over old decorated surface on wood or wood based surfaces including preparation of surfaces complete all as specified and directed.

All as per item No 94.00 here-in-before but on steel surfaces including preparation of surfaces.

M&L for rubbing and polishing to Kota stone flooring to give glossy finish complete all as specified and directed.

Demolition mud in roofs any thickness including plastering and leaping and removal from site exc 250 m but not exc 500 m and deposited complete all as specified and directed.

Dismantling Brick tiles or terracing tiles single layer on roofs and removal from site complete all as specified and directed.

S&F APP based polymeric water proofing membrane weighing minimum 3.00 Kg/m² and minimum 3 mm thick reinforced with polyester non woven fabric ( weight not less than 150 gms/Sqm laid over and including applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per Sqm by torch application including cleaning of surface as per approved manufacturer's instructions and complete as specified and directed. Note: The water proofing treatment shall be got executed by manufacturer or their authorised applicators.

M&L for 15 mm thick screed bed or bedding layer in CM 1:4 mixed with integral WPC for laying floor finish etc complete all as specified and directed. Note: Liquid WPC shall be measured and paid separately

M&L for 50 mm thick (average ) PCC 1:2:4 type B-0 using 12.5 mm graded aggregate as in roof padding for providing required slope, finishing surface even and smooth using extra cement complete all as specified and directed.

Supply only integral liquid water proofing compound. Make: Fosroc/Sika/Choksey Chemical

S&F in repair 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 110 mm dia fixed to PVC pipes complete all as specified and directed.

S&F in repair MS clamp made out of 25 X 3 mm flat iron suitable for 110 mm dia pipe including fixing to wall with PCC 1:2:4 of size 150x150x150 mm complete all as specified and directed.

M&L for chipping of spalled and loose concrete and cleaning rust from reinforcement by sand blasting scrubbing down concrete surface with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layers of guniting in RCC in column, beam,chajja, slab, slab landing, balcony etc with providing guniting pressure 2.00/2.5 kg per sq cm by guniting pressure machine over and including steel welded mesh having 2 mm dia of wire and aperture 50 mm, total thickness of gunite n.exc 25 mm thick (average thickness) in cement mortar 1: 2 using OPC 53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturers instructions and finally applying cement plaster over gunite surface of required thickness to give even uniform and smooth finish conforming to proper geometrics in cement mortar ( 1 : 3) to match with the existing surface as in sides and soffits etc. of slabs, chajjas, fins, facias, parapets, Lintels, columns and beams etc. complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 4 storey bldgs incl. removing of small tree shrubs etc. complete all as specified and directed.

All as per Serial item No 105.00 here-in-before but thickness of gunite exc. 25 mm but n.exc 40 mm (average thickness)

Demolition of cement concrete in ground floor and pavings n. exc 15 cm above or below ground level complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection finished even & smooth without using of extra cement complete all as specified and directed.

M&L for forming Construction joint 30 mm deep x 10 mm wide filled with sealing compound grade 'A' complete all as specified and directed.

M&L for sand filling in floors or pavings, laid in layers n. exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L for PCC ( 1 : 2 : 4) type B-1 as in roof kerbs, coping etc. including necessary form work all as directed complete all as specified and directed.

S&F precast RCC polymer concrete, M-30 grade of concrete by using nylon fibers, with 10 Nos of round hole on each drain cover, of size 1000 mm x 500 mm & 70 mm thick, manufactured by using joint less FRP moulds and casted by vibro compaction process, drain cover reinforced with 8 mm dia TMT mild steel bars @ 100 mm c/c both bays, set on drain as cover slab complete all as specified and directed . Make :- M/s Kreative Concrete, Plot No-61/20, Palli Industrial Area, Faridabad/ M/s KK Manholes & Grating Co. Pvt Ltd, 12/16, Sarvapriya Vihar, New Delhi.

Taking down carefully old U/S Aluminium / Copper point wiring (light, fan, socket or power) complete fitting such as switches, ceiling roses, pendants, sockets, regulators, light fittings etc. and making good disturbed surfaces of walls including necessary touch up with the adjoining surface of disturbed area i.e. with OBD/colour wash/white wash as the existing finish complete all as specified and directed.

M&L for point wiring with standard copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in concealed PVC conduit medium grade and sunk in new pressed steel terminal boxes of required size factory made and factory painted with stove enameled black paint with top cover 3 mm thick plastic/laminated sheet of required color with screwed and cup washer with all accessories including 1.5 Sqmm standard copper conductor PVC unsheathed cable earth and connected to earth dolly complete all as specified and directed for the following :- Note:- the rate is inclusive cutting /chasing and making good the disturbed surface with CM 1:3 and surface finishes to match the adjoining surface of disturbed area with OBD/Colour Wash /White Wash complete. New conduit of suitable size with connected fittings will be laid, if there is damage / blockage in existing conduit and the rates are inclusive of quoted rates.

One light /fan/Bell point controlled by one way switch

One 3 pin socket outlet 5 amps independent board

One 3 pin socket outlet 5 amps point on same board

All as per serial item No. 115.00 here-in-before but for One 3 pin socket outlet, 15 amps on independent board with cable 2.5 Sqmm for main current and 2.5 Sqmm as earth wire as power point.

S&F switch piano, flush type, 5 Amps, single pole, one way, complete all as specified and directed.

S&F socket , flush type 5 Amps, complete all as specified and directed.

S&F switch piano, flush type, 15 Amps, single pole, one way, complete all as specified and directed.

S&F socket , flush type, 15 Amps, complete all as specified and directed.

S&F Ceiling rose, 3 terminal PVC/ polycarbonate, isolated body complete all as specified and directed.

S&F stepped type electronic fan regulator flush type complete all as specified and directed.

S&F ceiling surface mounting in round/square shape LED down lighter with durable housing with Al heat shrink with diffuser to give glare free light with removable driver 12 Watt LED 6500 K lamp type in stairs/common areas, complete all as specified and directed. Make : C&S electric Cat Pt No : LTCRSUR12HPLEDRND/W or equivalent in Bajaj/Philips/Havells.

S&F LED Integrated Batten aesthetically designed linear mirror LED light fitting of 07 Watt 1' white, indoor decorative PVC extruded provided with a high output PMMA diffuser for glare free light LED batten integrated type complete with including flexible wire all as specified and directed. Make : CG Cat Part No : LCL-07-CDL or equivalent in Havells/Bajaj/Philips.

S&F Surface/Recessed mounting 34 Watt 2' x 2' LED panel fitting, Ultra modern designed architectural LED luminaire which provides soft-light and glare free symmetrical illumination suitable for ceiling Grid and making good all disturbed surface/ceiling to match with existing ceiling/surface complete all as specified and directed. Make : Havells Cat Pt No (Model) LHEWDRP7PK1W034(VENUS NEO-857) or equivalent in Bajaj/Philips.

S&F Bulkhead fitting suitable for LED 8/12 Watt of Base B22, Bulk head in die cast aluminium housing & frosted glass including all accessories connecting up twisted flexible copper conductor cable of suitable size of 230 V, 50 Hz complete all as specified and directed. Make:- Havells Cat part no. LHKL01160099 RUGBY or equivalent in Bajaj/ Phillips).

S&F LED Integrated Batten T5, 20 Watt, 4 Ft White, indoor decorative PVC extruded T5 LED batten -integrated type complete with including flexible wire all as specified and directed complete all as specified and directed. Make:- Halonix Cat Part No HLB-03--20-CW-AL or equivalent in Havells/ Bajaj/ Philips.

S&F LED Building security light fitting 45 Watt including bracket for fixing of security light fitting of GI pipe light grade of 32/40 mm dia with suitable size of clamps, anchor faster, nut bolts and washer complete all as specified and directed. Make:- Halonix Cat Part No : HLSLD-15-45-CWL-R or equivalent in Bajaj/ Phillips/ Havells).

S & F Inverter Bulb 12 Watt Rechargeable Emergency LED Bulb for Home, Cool Daylight, Base B22 Watt for surface mounting fitting/wall mounting light fitting or batten holder complete all as specified and directed.

S&F MCB DB SPN 12 Way double door type, (IP 43 Protection) flush mounting for MCBs complete all as specified and directed. Make:- Legrand Cat No. 607712 or equivalent model of ABB / Benlo

S&F MCB SPN 32/40 AMPs complete all as specified and directed. Make : Legrand / ABB / Benlo.

S&F MCB SP 6 to 40 AMPs complete all as specified and directed. Make : Legrand / ABB / Benlo.

S&F MCB TPN/Isolator 4 Pole from 63/100 Amps 415 volts, 10 KA as per site requirement complete all as specified and directed. Make : Legrand / ABB / Benlo.

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 6 Sqmm, 1100 Volts grade on & including PVC Conduit 25 mm medium grade complete with conduit accessories and copper cable 6 Sqmm continuous earth wire complete all as specified and directed and making good a disturbed surface with the existing adjoining surface of disturbed area i.e. with OBD/colour wash/white wash and wall putty where ever required. Make of cable : Polycab/Finolex/Havells Note:-Two runs of cable with 01 run of earth wire shall be measured as one unit length.

M&L for submain wiring of two runs of 10 Sqmm size for main cable and one run of 10 Sqmm size earth continuity conductor of single core PVC insulated but unsheathed FRLS cable of specified size multistranded copper conductor 1100 volts grade IS-694 marked, drawn through existing steel/PVC concealed conduit of size 25 mm dia with all fittings accessories complete all as specified and directed. Make of cable : Polycab/Finolex/Havells Note:-Two runs of cable with 01 run of earth wire shall be measured as one unit length.

S&F in replacement of distribution board triple pole and neutral 8 way for fixing MCCB up to 125 to 250 Amps as incomer and MCBs as out goings with metal door and IP 43 Protections and connecting complete all as specified & directed. Make : Benlo Cat Pt No : BEMD250T8 or equivalent in Legrand/ ABB/ Siemens

S&F MCCB 3 Pole 415 V, Adjustable type, 100/125 Amps with breaking capacity 25 KA complete all as specified & directed. Make : Benlo Cat Pt No. F3125M3P of Benlo or equivalent in Legrand /Havells /Indoasian

S&F in replacement Ceiling Fan 1200 mm sweep with 5 star rated and copper wound in white colour complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified & directed. Make: Havells Cat Part No : ES-50 or equivalent in Bajaj / Crompton Greaves Note: Unserviceable ceiling fans to be deposited in MES yard/ Store.

Supply and fixing metal body exhaust fan 300 mm sweep, 230 Volts copper wound with louver including necessary electric connection with appropriate size of PVC copper wire from ceiling rose/switch board to exhaust fan including fixing of nut-bolts of suitable size, cutting hole of appropriate size as per exhaust fan with suitable civil works and making good the disturbed surface of wall with OBD/White wash to match with existing complete all as specified and directed Make:- Halonix Krypton DBB or equivalent in Khaitan / Havells.

S&F in replacement metal body exhaust fan 450 mm sweep, 230 Volts with louver and copper wound including necessary electric connection with appropriate size of PVC copper wire from ceiling rose/switch board to exhaust fan including fixing of nut-bolts of suitable size and making good the disturbed surface of wall with OBD/White wash to match with existing complete all as specified and directed Make:- Halonix Krypton (HDEF) or equivalent in Khaitan / Havells. Note: Unserviceable exhaust fans to be deposited in MES yard/ Store

M & L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 3.0 mtr deep below GL with top edge of the plate not less than 2.5 mtr below normal GL and connected to earth plate . Earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt upto 1.5 meter depth all around the earth plate and connected to earth lead of GI earth wire 4 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvanized iron or steel pipe light grade 15 mm bore and water pipe 20mm bore GI medium grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Part-I of 2009 and also including making test point for testing of earthing made out of gun metal or phosphorous bronge size 75x75x25 mm complete . Note :- 1. RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmm in lieu of CI cover. 2. Charcoal dust and common salt upto 1.5 meter depth shall be filled in layers of 15 centimeters all around the earth plate. on testing after completion of earthing if desired earth resistance is not achieved , the earthing will be redone at no extra cost to obtain the desired earth values .

M&L for Earth continuity conductor or main earthing lead 4 mm dia galvanised iron or steel wire fixed on wall/ceiling in batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed on poles or any other indicated situation for loop earthing etc. complete all as specified and directed.

S&F lamp holder with PVC body and back plate suitable for LED Bulb B-22 cap complete all as specified and directed.

S&F in replacement Metal clad plug and socket 20 Amps with MCB SP and steel enclosure complete all as specified and directed.

Taking down unserviceable MCB/MCCB DBs with MCB/ MCCBs any type complete all as specified and directed.

Taking down submain wiring any size from existing conduit any type complete all as specified and directed.

M/S Chhavi Constructions Co

Shiv Shankar Nirman Co.

India Guniting Corporation

The new hut furnitures