Construction of RCC Road crossing culverts and Sewer manholes on west side of building 306 and 309 at FRFCF Project site, Kalpakkam

Amount

All kinds of soil with depth up to 1.5m below average Ground level and disposing surplus excavated earth up to a lead of 1Km

All kinds of soil with depth exceeding 1.5m but not exceeding 3m below average Ground level and disposing surplus excavated earth up to a lead of 1Km

All kinds of soil with depth exceeding 3m but not exceeding 4.5m below average Ground level and disposing surplus excavated earth up to a lead of 1Km

All kinds of soil with depth exceeding 4.5m but not exceeding 6.0m below average Ground level and disposing surplus excavated earth up to a lead of 1KM

Supplying & placing Filcrete using cement sand in proportion of 1:15 at temperature not exceeding 38 deg C for filling at all elevation inclusive of all labour, batching, mixing, transportation, material, compaction, pumping, curing etc all complete as per specification, drawing and as directed by the Engineer In-charge.

Providing and laying plain cement concrete M20 grade using 300 kg/cum of PPC, 20mm maximum size graded aggregates and washed crushed stone sand including mechanical mixing, transporting and placing in required position, ramming, compaction, levelling, curing, shuttering, dewatering if any, complete all as per specification for levelling courses in foundation for walls, footings, floor drains etc., encasing pipes and other required works directed by Engineer-in-Charge complete all as per specifications. Dosage of PCE based admixture as per workability requirment at site conditions. Note: 1. The rate of concrete shall include all labour, equipment, charges for mixing & cost of admixture. Polycarboxylate ether (PCE) based chemical admixture confirming to IS 9103 shall be mixed in fresh concrete and prior permission from engineer-in-charge shall be obtained for dosage and compatibility. 2. Test certificate of cement, procured from dealer/company to be submitted for all cement related works by the Contractor. 3. The rate shall be quoted on the basis of using minimum cement per cu.m. of concrete mentioned below for relevant grade of concrete. Any upward/ downward variation required to obtain the specified strength will be paid for or deducted at the rate of cement specified in Schedule F.

Providing and laying cast insitu controlled reinforced cement concrete of specified grade at all levels and lifts mentioned below using 20mm maximum size hard granite machine washed washed crushed graded stone aggregates and washed washed crushed stone sand including testings as per QAP, weigh batching, charges for mixing & cost of admixture, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, 14 days curing and finishing smooth of all exposed faces complete for column footing, columns, lintels, sunshades, gutter slabs, beams, slabs, water tank, machine foundation and all other structural elements including dewatering wherever necessary (Formwork and reinforcement will be paid for separately) all as per specification and all as shown in drawings and as directed by the Engineer-in-charge for all insitu item. Note: 1. The rate of concrete shall include all labour, equipment, charges for mixing & cost of admixture. Polycarboxylate ether (PCE) based chemical admixture confirming to IS 9103 shall be mixed in fresh concrete and prior permission from engineer-in-charge shall be obtained for dosage and compatibility 2. Test certificate of cement, procured from dealer/company to be submitted for all cement related works by the Contractor. 3. The rate shall be quoted on the basis of using minimum cement per cu.m. of concrete mentioned below for relevant grade of concrete. Any upward/ downward variation required to obtain the specified strength will be paid for or deducted at the rate of cement specified in Schedule F.

M30 grade with 380 kg/cum of PPC cement per cu.m. of concrete upto plinth level

Supplying, fabricating, erecting and fixing in position at all levels, centering and shuttering to correct line and levels including strutting, propping, etc., with necessary bracings in all axes to give a stable assembly with provision for making the joints in the shuttering fully leak proof and with provision for fixing coil nuts with tie rods along with suitable channel for lateral supports and for inserts, projecting dowels, anchor bolts or any other fixture, including staging, access and working platforms etc., all complete as specified and directed including dismantling and removing the aforesaid assembly after the concrete attains the sufficient strength to self-support itself without cracking and distortion all as per specification, including all materials and labour complete in all respects at all lifts. The measurement for the formwork will be the actual area of forms in contact with concrete surfaces. Shuttering with plywood panels alone will be permitted.

Supplying, fabricating, erecting and fixing in position at all levels, centering and shuttering for curved surface (using mild steel) to correct line and levels including strutting, propping, etc., with necessary bracings in all axes to give a stable assembly with provision for making the joints in the shuttering fully leak proof and with provision for fixing coil nuts with tie rods along with suitable channel for lateral supports and for inserts, projecting dowels, anchor bolts or any other fixture, including staging, access and working platforms etc., all complete as specified and directed including dismantling and removing the aforesaid assembly after the concrete attains the sufficient strength to selfsupport itself without cracking and distortion all as per specification, including all materials and labour complete in all respects at all lifts. The measurement for the formwork will be the actual area of forms in contact with concrete surfaces.

Providing straightening, decoiling wherever necessary bending, cutting, binding and fixing in position steel reinforcement TMT bars of Fe500D grade steel conforming to IS:1786 and tying with approved annealed binding wire of 1.6mm dia in all reinforced cement concrete work at all lifts, including cost of supplying and fixing the spacer/cover blocks and binding wire complete all as per specification and as directed by Engineer-in-Charge at all lifts. Note: The rate shall be including the cost and testing of reinforcement steel at thrid party NABL lab. The reinforcement steel will be procured from dealers with a test certificate as approved by the department. For further details please see Clause 12 of Section VIII, General Information for Guidance of Tenderers.

Providing and concstructing at all floors and lifts 115mm thick brick work in cement mortar 1:4 using well bunt bricks including scaffolding, curing, racking out the joint on both faces etc. complete as per specification and as directed by the Engineer-in-Charge.

for Basement and Ground Floor

Providing, supplying, cutting, bending to shape, welding, fabricating, hoisting, placing and fixing in position structural steel members like MS structural embedment's/pipe and sleeves/penetration etc. Using MS angles, channels, I-sections, plates, tees, flats, rounds, square sections etc. including chamfering and rounding off the edges, applying a coat of Red lead paint primer / Zinc chromate primer of approved make and 2 coats of flat oil paint / sythetic enamel paint of approved colour and make, scaffolding and staging required for fabrication as well as erection complete all as per specifications, drawings and as directed by the Engineer-in-charge. Note: Lifting device arrangements if any required also arranged by the contractor at his own cost.

Manufacturing, supplying, hoisting and fixing in position at all lifts, precast units of various patterns and sizes for precast plain solid units, slabs, etc, in controlled reinforced cement concrete of M30 grade using 20mm and below machine crushed graded stone aggregate including making perforations in precast slab as per drawing weigh batching, mechanical mixing, casting, vibrating, finishing of exposed faces, curing, necessary formwork, moulds, transporting and placing at all lifts, preparation of connections, grouting with cement mortar/cement grout wherever needed excluding steel reinforcement complete all as per drawing, specification and as directed by Engineer. Note: 1. The rate shall be quoted on the basis of using 380 Kg. of PPC Cement per cu.m. of concrete. Any upward/downward variation required to obtain the specified strength will be paid for or deducted at the rate specified in schedule F. 2. The rate of concrete shall include all labour, equipment, charges for mixing & cost of admixture. Chemical admixture confirming to IS:9103 shall be mixed in fresh concrete and prior permission from Engineer-in-charge shall be obtained for dosage and compatibility. 3. Test certificate of cement, procured from dealer/company to be submitted for all cement related works by the Contractor.

Providing and laying non pressure NP4 class RCC Spun concrete pipes conforming to IS 458-2003 with socket and spigot jointed with Rubber sealing ring type, laying to the levels, slopes including testing of joints, leak test etc. complete all as per the drawings and specifications and as directed by the Engineer-in-charge.

150mm dia NP4 class RCC Spun concrete pipes

Supplying, hoisting and fixing in position at all lifts, Steel fibre reinforced concrete of Heavy duty (HD-20) manhole cover with frame precast units conforming IS 12592 circular in shape with load carrying capacity of 20MT for circular manhole of clear opening of 560mm dia with using controlled reinforced cement concrete of required grade complete all as per drawing, specification and as directed by Engineer. Rate to include lifting hook, anticorrosive paint, grinding of conceret surfaces for proper seating and sealant filling between cover and frame. Note: 1. The rate shall be quoted on per set basis. One set means manhole cover with frame 2. Reinforcement required for the preparation of precast manhole frame and cover shall be included in the rate 3. Edge angle protection if required will be paid under relevant item.

Providing and laying non pressure NP2 class RCC Hume pipes conforming to IS: 458, with collars jointed with stiff mixture of cement mortar in the proportion of 1:2, laying to the levels, slopes including testing of joints etc. complete all as per the drawings and specifications and as directed by the Engineer-in-charge.

150mm diameter NP2 Class RCC Hume Pipe

450mm diameter NP2 Class RCC Hume Pipe

Providing and fixing Unplastisized PVC (UPVC) pipes in trenches / open pipeline work having thermal stability for hot & cold water supply (as ASTM Standard 2846 & SDR - 11 Grade) including all UPVC Plain & Brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing / under ground. This includes jointing of pipes & fittings with UPVC Solvent cement & testing the joints complete all as per specifications, drawings and as directed by the Engineer-in-charge.

110mm outer dia UPVC pipe

160mm outer dia UPVC pipe

Core cutting in RCC structures at given location of specified diameter and different lengths, with rotary drilling, either by pneumatic machines or by electrical machines, at all elevations / positions without disturbing adjacent structures etc., for horizontal and vertical surface all complete as per drawings, specifications and as directed by Engineer-in-charge. Rates to include all labour, tools, tackles, consumables, scaffolding & staging etc.

Upto 200mm diameter

Construction of Inspection chamber of following size internally up to 1.00 metre depth with brick masonry walls of 230/345mm thick using stock bricks in cement mortar 1:5 with necessary brick carbelling as required, plastering with cement mortar 1:3, 12mm thick for external sides of the chamber including excavation in all types of soils, back filling, providing and laying 150mm thick PCC 1:4.5:8 for foundation concrete forming bencing in PCC 1:2:4 using 20mm maximum size graded aggregate etc. complete all as per specification, drawing and as directed by the Engineer-in-charge.

Inspection chamber of internal size 900x600mm

Providing and constructing Gully Chamber of internal size 300x300mm including providing, supplying and fixing 150 x 150mm stoneware gully trap with CI grating including excavation in all types of soils, backfilling, embedding in plain cement concrete 1:4.5:8 using 40mm size granite aggregates and constructing the above chamber with 115mm thick brick work in plastering over both internal and external faces of brick work with cement mortar 1:3, 12mm thick finished smooth with a floating coat of neat cement on both faces, providing and fixing CI cover with frame of 300 x 300mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg as per standard design complete all as per specification and as directed by the Engineer-in-charge.

Dismantling of RCC works at all levels by manually / by mechanical including Cutting and stacking of steel reinforcement bars and disposal of unserviceable materials within 50m lead, labour, tools required etc. complete in all respects as per specifications and directed by the Engineer-in-charge.

Supplying and fixing in position of heavy quality FRP manhole steps rungs of approved maket for the inspection chamber, valve chamber etc. all as per specifications and as directed by the Engineer-in-Charge.

Supplying and fixing shoring using MS plates, channels, I section,steel boards,support jockeys,tierods,pipes to retain the sides of excavated earth / adjucent structures upto all elevations including lateral supports, bracing etc., until the completion of work all as directed by the EIC.

Providing plastering to the internal and external surfaces of brickwork / concrete at all elevations in cement mortar 1:5, 12mm thick including hacking of concrete surfaces with pointed tool, scaffolding, finishing, curing, forming grooves wherever necessary, all as per specifications.

SAKTHI ENGINEERS

G.G CONSTRUCTION