ADDITIONAL CLASSROOM FOR NURSERY SCHOOL NORTH AT MINICOY

Amount

Brick work in super structure above plinth level upto floor five level

Reinforced cement concrete 1:1.5:3 ( 1 cement: 1.5 M.Sand: 3granite chips 20mm nominal size) excluding cost of centring and shuttering and reinforcement All work up toplinth level.

Cold twisted steel reinforcement for R.C.C. work including bending, binding and placing in position complete

Centring and shuttering includingstrutting, propping etc and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Centring and shuttering includingstrutting, propping etc and removal of form for Suspended floors,roofs,having slope up to 15 degree landings, shelves chajjas, lintels ,bands,plain window sills,staircase and spiral stair case up to floor five level

12mm cement plaster 1:6 (1cement :6 metal sand)

15mm cement plaster 1:6 (1cement :6 metal sand) on rough side of single

6mm cement plaster to ceiling 1:3(1cement :3 metal sand)

Providing and laying vitrified tiles in floor with diffrent sizes (thickness to be specified by the manufacture ) with water absorbtionless than 0.08 % and confirming to IS: 15622 of approved brand andmanufacture, in all coulers and shades, laid with cement based high polymer modifeid quick set tile adhesive ( water based ). (Khajaria polished vitrified tiles or equivalent)

Providing and laying vitrified tiles in floor with diffrent sizes (thickness to be specified by the manufacture ) with water absorbtion less than 0.08 % and confirming to IS: 15622 of approved brand and manufacture, in all coulers and shades, laid with cement based high polymer modifeid quick set tile adhesive ( water based ). (Khajaria polished vitrified tiles or equivalent)

Providing and laying Ceramic Tiles in floor with diffrent sizes (thickness to be specified by the manufacture ) with water absorbtionless than 0.08 % and confirming to IS: 15622 of approved brand andmanufacture, in all coulers and shades, laid with cement based high polymer modifeid quick set tile adhesive ( water based ) (Khajaria polished vitrified tiles or equivalent)

Providing and laying Ceramic glazed wall tiles with diffrent sizes ( thickness to be specified by the manufacture ) with water absorbtion less than 0.08 % and confirming to IS: 15622 of approvedbrand and manufacture, in all coulers and shades,in skirting , riserof steps,laid with cement based high polymer modifeid quick set tile adhesive ( water based ) (Khajaria polished vitrified tiles or equivalent) 300x300 mm

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. (Birla White orequivalent).

Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufactures specifications two ormore coats applied on walls @1.25ltr/10 sqm) over including priming coat of special primer applied @ 0.75 ltr/10 sqm

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position-I class Karimaruthu or equivalent ( hold fast lugs or dasg fastener shall be paid for separately )

Providing and fixing 35 mm thick panelled, glazed or panelled and glazed shutters for doors windows and clerestory windows including anodised aluminium butt hinges with necessary screws.First class Karimaruthu or equivalent ( Double leef shettre)

Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube,the vertical door profiles to be reinforced with 19x19mm M.S.square tube of 19 gauge,EPDM rubber gasket weather seal tobe provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge.

Providing and fixing to existing door frames. 24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuiltedging on both sides. The styles and rails mitred and joined at the corners by meansof M.S.galvanised/plastic brackets of size 75x220 mm having wallthickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm ± 0.1 mm wall thickness. The lock ailmade up of’H’ section, a UPVC hollow section of size 100x24mm and 2 mm ± r 0.2 mm wall thickness fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. Theshutter frame filled with a UPVC multi-chambered singlepanel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm ± 0.1 mm wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter)

Painting Wood work with Deluxe Multi surface paintto give an even shade.Two or more coats applied on @0.90ltr/10 sqm) over under coat of primer applied @ 0.75 ltr/10 sqm of approved and manufacture

Providing 40 x5 mm Iron hold fast 40 cm long including fixingto frames with 10 mm dia bolts nuts , wooden plugs and embedding in cement concrete block of size 30 x10 x15 cm of mix 1:3:6 ( 1 cement : 3 river sand : 6 graded stone agrigate of 20 mm nominal size )

Providing and fixing anodised Aluminium tower bolt (barral type) anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete

Providing and fixing anodised Aluminium handle anodised transparent or dyed to required color and shade with bolts ,nuts and screws etc complete.

Brass handle 125mm

Brass handle 75 mm

Providing and fixing anodised Aluminium hooks and eyes anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete. 200mm

Providing and fixing anodised Aluminium sliding door bolt anodised transparent or dyed to required color and shadewith bolts , nuts and screws etc complete.300X16mm

Providing anf fixing white vitrous China water closet Pedestal pan(European) type WC pans with white plastic seat and lid and rubber buffers, 15 white vitrous China low level flushing system of approved make with fittings and brackets 40mm flush bend, 20mm over flow pipe with complete including cutting and making good the walls and floors where required

Providing anf fixing white vitrous China wash basin with RS or CI brackets painted white, 15mm C.P bras pillar tap and C.P brasschain and rubber plug 32mm C,P. brass waste of standrad pattern 32mm diametre and waste pipe complete including cutting and making good the walls and floors where required.

Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fittings including trenching and re filling etc. Internal work

32mm nominal bore (6Kg/sqcms)

25mm nominal bore (6Kg/sqcms)

Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fittings including trenching and re filling etc. External work 110mm Nominal bore

MOHAMMED ALI AKBER P

E P Firose Khan Koya

A J ENTERPRISES

Nadheem Enterprises