SPL REPAIR OF BLDG NO P 115 AND PROVN OF FALSE CEILING IN BLDG NO P 23 AT UMROI MIL STN UNDER GE UMROI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed.

Taking down door frame or Chowkhats or frames exc. 1.5 sqm but n.exc 4.0 sqm each (without taking off shutter from frame) complete all as specified and directed.

Taking down door frame or Chowkhats or frames n exc. 1.5 sqm each (without taking off shutter from frame) complete all as specified and directed.

S&F solid PVC wall panelling consisting of 5mm thick plane color PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification including 5mm thick and 35mm width PVC sheet fillets for wall panelling to make PVC frames including taking down wall panelling complete all as per specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) external surfaces on fair faces of brick work or concrete surfaces complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) internal surfaces on other than fair faces of brick work or concrete surfaces complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coat of distemper oil emulsion including internal wall putty 1.5mm thick to distempering, complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall & chajja and applying two coat of acrylic smooth exterior paint including 1.5mm thick external wall puty oil emulsion complete all as specified and directed.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6), complete all as specified and as directed

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed in cement mortar (1:6), complete all as specified and as directed

M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in cement mortar (1:4), complete all as specified and as directed

M&L for Kota stone slab 20-25mm thick in floor laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15mm thick screed bed in CM 1:4 complete all as spd and as directed

Ditto all as per item no 15 but as in skirting including 10mm thick renderting in cement mortor (1:4), complete all as specified and as directed

Supply and fix aluminium anodised (powder coated) Three track sliding window frame with shutters with ( 2 nos glazed and one wire gauzed shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete and glazing with and including 5 mm thick tinted glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers etc with the following section of frame and shutter (A) Sections for shutter (i) 'H' section 39 x 20 x 1.50 mm thick (ii) 'Interlock' section 39 x 20 x 1.50 mm thick (iii) 'Edge & Bottom' section 41 x 20 x 1.50 mm thick (B) Section for frame (i) Top & Sides 123 X 29.70X 1.50mm not less than 1.30 Kg /RM (ii) Bottom 123 X 29.70 X 1.50mm not less than 1.502 Kg /RM, complete all as specified and directed .

Supply and fix anodised powder coated (minium thickness 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed .

Supply and fix anodised aluminium door shutters (powder coated), side hung type without sash bars, aluminium sections weighing 0.75 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.), complete all as specified and directed .

Supply & Fixing 5.5mm thick sheet glass glazing ordinary quality in square/rectangle n,exc 0.50 sqm each pane with oil putty or aluminium beads fixed to steel etc complete all as specified and as directed.

S&F and repair Block board, grade 2 quality, interior grade, commercial type 19mm thick as in cupboard shutter/kitchen cabinates including (Al handdle, MS hinges, PVC knobs and necessary fixing items as per standared engineering practice) and complete all as specified and directed

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, complete all as specified and as directed.

M&L for Providing and fixing false ceiling of designer tile ivory painted (high pressure steam cured ) of 4mm thick (as per IS: 14862) of size 595x595mm and any one of the design (cascade or electra) in true horizontal level. Suspended on inter locking metal grid of hot dipped galvanized steel section (galvanized @120gms both side inclusive and black painted groove on all T webs)consisting of main T runner with suitably spaced joints to get required length and 15x32mm made of 0.3mm thick sheet spaced at 1200mm c/c and cross T of size 15x32mm made of 0.3mm sheet 1200mm long spaecd between main T at 600mm c/c to form a grid of 1200x600mm and secondary cross T of length 600mm and size 15x32mm made of 0.3mm thick sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including required cutting/making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.Main T runners to be suspended from trusses/ceilings using suitable suspension arrangement as per manufacturers instructions/literature. GI adjustable wire of 4mm dia with galvanized butterfly level clips spaced at 1200mm c/c along main T bottom exposed width of 15mm of all T section of 4mm dia GI wire shall be pre-painted with with polyster paint and black painted groove at centre of size 4mm depth and 4.5mm width, complete all as specified and as directed.

S&F of Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ridge/ cladding to wall, fixed with self tapping screw in roofs complete all as specified and directed.

M&L for complete removal of existing treatment on walls and applying two coat of distemper oil emulsion including internal wall putty 1.5mm thick, complete all as specified and directed.

M&L for complete removal of existing treatment on walls, chajja and ceiling and applying two coat of acrylic smooth exterior paint including 1.5mm thick external wall puty oil emulsion, complete all as specified and directed.

Material and labour for PCC (1:4:8) type D-2 using 40 mm graded stone aggregates as in foundations, filling and mass concrete, complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan exc. 6m mean radius built in CM 1:6 all as specified and directed.

M&L for 18 to 20mm thick green Marble work (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including demolition complete all as specified and directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulators, sockets, etc. to be measured separately) and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as directed by the Engr-in-Charge.

Taking down carefully MCB DBs SP/TPby unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed.

Refixing only round Shape 6 watt LED Lamp/Bulk head/AC Decorative Box type 220 Volts AC recessed/roof type complete with drivers, holders, including connecting up with three core flexible Copper Conductor Cable of suitable size Complete all as specified and directed.

Refixing only Exhaust Fan, including connecting up with three core flexible Copper Conductor Cable of suitable size with Clamps, hook, holdfas tetc Complete all as specified and directed by Engr-in-charge.

Material and labour for point wiring for the One light/fan point controlled by one,one way switch with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and including PVC casing and caping including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3 mm thick complete all as specified and directed.

All as per serial item No 36 here in before but for one 3 pin 5 Amp socket outlet on independent board.

All as per serial item No 36 here in before but for one 3 pin 5 Amp socket outlet on same board.

All as per item No 36 here-in-before but using 2.5 sqmm PVC FRLSH insulated copper condutor wire for connecting 15A socket on independent board.

Supply and fixing of switch piano flush type 240 Volts 5 Amps, SP, one way with white colour complete all as specifed & directed.

Supply and fixing of switch socket outlet combination 3 Pin, 5 Amps, 240 volts flush type (non shuttered) with white colour complete all as specified & directed.

Supply & fixing of socket 3 pin 5 Amps 240 Volts flush type (non shuttered) with white colour complete all as specified and directed.

Supply and fixing switch socket out let combination multipurpose 3 pin, 5/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) with white colour complete all as specified & directed.

Supply and fixing ceiling rose surface PVC/Polycarbonate, 65x50 mm two to three terminals, complete all as specified & directed.

Supply and fixing ceiling fan regulator electronic, Deluxe, rotary, step type, 120/280 V, complete all as specified & directed.

Supply and fix MCB TPN DB 4 way 415 Volt , Busbar Capacity of 200 Amps double door,IP 43 protection,Glazed door, isolated neutral bar,insulated bus bar assembly, mechanical strength of IK09, complete all as specified and directed.

Supply and fix MCB SPN DB 8 way double door,IP 43 protection,Glazed door, isolated neutral bar,insulated bus bar assembly,mechanical strength of IK09, complete all as specified and directed.make:- C&S, L&T or Havells.

Supply and fix MCB TPN 100 Amps 'C' Series 10 Ka,240 volts, complete all as specified and directed.

Supply and fix MCB SPN 32 Amps 'B' Series 10 Ka,240 volts, complete all as specified and directed.

Supply and fix MCB SP 6 to 20 Amps 'B' Series 10 Ka,240 volts, complete all as specified and directed.

Supply and fixing Bulb holder angular PVC/Polycarbonate suitable for batten fittings, complete all as specified and directed.

Supply and fixing LED Inverter Batten fitting 1x18 watts including Tube rod, 230 Volts, bipin holders connector block etc.complete with all accessories internally pre-wired and including provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23.0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting, complete all as specified and directed.

Supply and fixing LED Luminarie 600mm x 600mm, 35/36 watt 220 Volt AC recessed type with high efficiency PMMA Diffuser Soft glare free light Complete with driver suitable for roof ceiling including connecting up with the driver, complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type including connecting up with the driver, complete all as specified and directed.

Taking down aluminium/copper submain wire along with damaged casing caping /PVC conduite pipe from the wall roof or floor and making good distrubed surface complet all as specified and directed.

S&F sub main wiring with three run of single core (FRLSH) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.0 Sqmm drawing into and including PVC casing and caping of adequate size with proper colour coding and making electric connections , including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed. Note :- (i) Rates are deemed to be included chases of sinking for boxes cutting and making holes in wall/floor for passing in or through casing caping (ii) Three run of 6.00 sqmm single core (FRLSH) PVC insulated copper conductor cable and one run of PVC casing caping of suitable size will be measured as a one unit.

S&F Geyser 25 ltrs capacity 5 Star rated single phase 230 volts 50 Hz ,2 KW including required number of bolts, nut, grouting/plastering arrangement to fix the geyser properly & safely on wall, complete all as specified and directed. Make:- Usha / Havells / Bajaj / crompton or equivalent make specified in CA. Note:- (i) The cost of Necessary grouting/nuts, bolts, PCC, Making good etc. shall be deemed included in quoted rate Nothing extra shall be paid

Supply and fix LED bulb of 9 Watt (Warm white), complete all as specified and directed.

M&L for cutting of Square/Circular hole at any type of wall suitable size for fixing of exhaust fan of size 300/250mm sweep, grouting 04 Nos 100mm long 12mm dia stud bolt including, making good to disturbed surfaces of wall to match as per the existing colour complete all as directed and specified.

Supply & fix Wall Mounted fans AC single phase 230/ 240 V of size 400 mm sweep complete all as specified as Directed including taking down ceiling/wall mounted fan with all accesories and submitting back to MES Umroi Store yard.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep metallic body with louver, complete all as directed and specified.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 250 mm sweep metallic body with louver, complete all as directed and specified.

Supply & Fixing Ceiling fan of 1200mm working on BLDC Technology without remnote with all its accessories, complete all as specified and directed including taking down ceiling/wall mounted fan with all accesories & Submitting back to MES Umroi Store yard.

Material and labour for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to earth lead wire 4 mm dia by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar,funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary execuation and earth works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I including taking out the old earthing material complete all as specified and directed.

Taking down and refixing, old existing servicable MCB's SPN, SP, TPN, DPN any other size/ type, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core, complete all as specified and directed.

Excavation in trenches not Exe. 1.5 m wide and not Exe. 1.5m in depth for foundation, etc, or for shaft, wells, cesspits, manholes, pier holes, etc. not exc. 10 sqm on plan and getting out in soft/loose soil complete all as specified & directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil, complete all as specified and directed.

Supply and spread sand in trenches as sand cushioning to underground cable for protection with fine river sand and provide required cover after punning down complete all as specified and directed. Note : For the purpose of payment only punned thickness will be measured.

M&L for common burnt clay building bricks (locally available best quality), sub-class ‘B’ designation 75 of size 230x115x75 mm to cover LT underground cables , laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and directed.

Removing surplus excavated materials (soil) upto a distance not exe 50 m and depositing where directed at a level n exe 1.5 m above the starting point complete all as specified and directed.

Supply and fix 50mm bore GI tubes, 'light grad', galvanised, with all fitting laid in trenches, complete all as specified and directed.

Schedule of Credit

M/s Mangal Enterprise

M/s UB Enterprise

M/S RAJA CONSTRUCTION