REPAIR TO CERTAIN B R ITEMS IN CERTAIN MD/ OTM ACCNS OF AGE B/R-I (AF) UNDER GE (AF) CHABUA

Amount

Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius in half brick thick wall built in CM 1:4 complete all as specified.

Taking down cement plaster any descriptionfrom walls/ceiling including racking out joints hacking for key scrubbing down with water etc.

M&L for rendering 15mm thick plaster in CM (1:4) on brick or concrete surfaces finished even & fair complete all as specified and as directed.

M&L for rendering 15mm thick plaster in CM (1:6) on brick or concrete surfaces finished even & fair complete all as specified and as directed.

All as per item No 6 here-in-before but 15 mm thick in CM (1:3) with chiken mesh on ceiling, complete all as specified and as directed."

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over 1mm thick plaster of paris putty over a coat of primer using roller only as per manufacturers instruction, complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M&L for three coats of white wash on newly plastered surface on ceiling, complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position no otherwise specifically provided for as in cover slabs (for man holes, septic tank, soak well etc) complete all specified and as directed.

M&L for RCC (Nominal mix) for slabs supported on walls, beams and columns in floors, roofs, kitchen slabs, balconies, canopies made in RCC 1:2:4 type B1 using 20mm graded aggr all as specified and as directed

MS bars (TMT) 8mm dia and over cut to length bent to shape reqd incl cranking binding spirally for hooking for cols and binding with and inc mild steel wire (Annealed) not less than 0.9mm dia as in reinforcement

Formwork to rough finished flat sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

Demolition of stone slab of any description including cement mortar bedding but not backing, complete all as specified and as directed.

M&L for 15-18 mm thick granite of any type/colour(brown/white/yellow/red) as approved, work (table rubbed mirror polished) edges rounded chamfered and bull nosed laid and fixed in any position (Vertical/Horizontal/Inclined) over and including cement screed over Cement mortar bedding in CM(1:4) 10 thick and pointed in white or colour cement with admixer of pigment to match with shade of granite stone incl grinding and polishing complete all as specified and as directed by Engr-in-Charge.

Demolition of cement concrete in ground floor and pavings nexc 15cm thickness (below or above ground level), complete all as specified and as directed.

M&L 25mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in levelling course complete all as specified and directed

M&L non skid cermic coloured tiles 8mm thick ( square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floor etc and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layer in CM (1:6) all as specified and directed

M&L for Virified Dark Shade/Designer Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM 1:4.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as directed.

S&F glazed ceramic coloured tiles in vertical surfaces such as skirting, dado etc 350 x 250 x 7mm/ 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl cutting to reqd shape and size over and including 10mm thick plaster in CM (1:4) on vertical surfaces as backing coat

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40mm graded aggr) as in path/hard standing/ plinth protection cement all as specified and directed

Resecuring or easing & adjusting, including taking down shutter and refixing in the same opening any description exc 1.00 Sqm each complete all as specified and as directed.

Resecuring or easing & adjusting, includind taking down shutter and refixing in the same opening any description exc 1.00 Sqm and n.exc 2.0 Sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters w/o taking off shutters from the frames n.exc 1.5 Sqm each,complete all as specified and as directed.

Taking down chowkats or frames with shutters) w/o taking off shutters from the frames exc 1.5 Sqm and n.exc 4.0 sqm each each, complete all as specified and as directed.

Taking down shutter of any description n. exc 1.00 Sqm each complete all as specified and as directed.

Taking down shutter of any description exc 1.00 Sqm and not exc 2.00 sqm each , complete all as specified and as directed.

S&F second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed with fastners complete all as specified and as directed.

S&F 2nd class hardwood 35mm thick Glazed skeleton door shutters, open rebated and prepared to receive glass, Gauze etc (with out sashbars) edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc, size of members of shutters as specified in SSR Part-I Section 8, clause.8.24 (a), using IInd Class Hard wood complete all as specified and as directed.

S&F 30mm thick Glazed skeleton shutters for window,ventilator etc are provided with stiles and rails, open rebated and prepared to receive glass, Gauze etc (with out sashbars) edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc, size of members of shuttersas specified in SSR Part-I Section 8, clause.8.24 (a)., using IInd Class Hard wood complete all as specified and as directed.

S&F 30mm thick flush shutter, soild core construction, with block board core and plywood face panels, commercial type on both sides including following fittings and fixtures.

S&F for 35mm thick, IInd class hard wood, plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Refixing shutter in same opening any description exc 1.00 Sqm and n.exc 2.0 Sqm each complete all as specified and as directed.

S & F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples all as specified and as directed by the Engineer-in-Charge

S & F in repair galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples all as specified and as directed by the Engineer-in-Charge

S&F in 3mm thick plain glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane

S&F in repair 3mm thick plain glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane including hacking out all as specified and directed

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge

S&F factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site all as specified and directed.

S&F anodised aluminium window shutters in three track sliding (whichever the case may be ordered to sliding horizontally or vertically) with two or more shutters with sliding arrangement with two or more shutter rubber beading and glazing clips using aluminium sections weighing not less than 0.55 Kg/Mtr etc complete and inclusive of necessary hardware i.e. locking mechanism, handle and 4.8mm thick selcted quality glass for glazing and stainless steel wire cloth 0.71mm dia with width of aperture 1.18mm including necessary gasket / neoprene / rubber packing / beading etc all as specified and directed

S&F anodised aluminium ventiator with louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips with rubber beading and glazing clips etc using aluminium sections weighing not less than 0.55 Kg/M including fosted glass louvers and allied items to facilitate louver action etc complete all as specified and as directed

M&L for preparation of new or previously untreated wooden surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed

S&F framed work such as grills, gratings etc. with ends of bars shouldered and or rebated or forged into spikes, framed guard bars etc confirming to Fe-290-Gde-E-165 complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide.

S&F 150 mm long anodised aluminium handles, cast type complete all as specified and as directed.

S&F in repairs for 150 mm long anodised aluminium handles, cast type complete all as specified and as directed.

S&F for 150 mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and as directed.

S&F in repairs for 150 mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and as directed.

S&F 300mm long aluminium anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

S&F in repair 300mm long aluminium anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

S&F 100mm long anodised aluminium handles, cast type, complete all as specified and as directed.

S&F in repairs 100mm long anodised aluminium handles, cast type, complete all as specified and as directed.

S&F for 100mm long anodised aluminium barrel tower bolt of extruded section, complete all as specified and as directed.

S&F in repairs for 100mm long anodised aluminium barrel tower bolt of extruded section, complete all as specified and as directed.

S&F MS butt hinges of size 100 mm complete all as specified and as directed.

S&F in repair MS butt hinges of size 100 mm complete all as specified and as directed.

S&F MS butt hinges of size 75 mm complete all as specified and as directed.

S&F in repair MS butt hinges of size 75 mm complete all as specified and as directed.

S&F in repair 300mm MS ordinary rat tail spring (Helical door spring) including roller and roller plate complete

S&F in repair 18/19 mm thick pre-laminated particle board interior grade one side with decorative choice laminations and other side balancing white lamination fixed in cup board shutter, shelves, partitions and similar items including teak wood leeping on edges complete all as specified and as directed.

S&F continuous (Piano) hinges, mild steel bright finished or electro galvanised with flap size 30mm complete all as specified and as directed.

S & F Hasp and staple for 75 mm of aluminium anodised complete all as specified and as directed

S & F in repairs Hasp and staple for 75 mm of aluminium anodised complete all as specified and as directed

S&F 15 mm bore GI water tube medium grade with all fittings and fixed to wall, floor and ceiling etc including concelaled/open complete taking down all as specified and as directed.

S&F 20 mm bore GI water tube medium grade with all fittings and fixed to wall, floor and ceiling etc, complete including concealed/open taking down all as specified and as directed.

S&F in repair vitreous china wash hand basin, (white), flat back of size 550x400 mm with and including two CI brackets, brass chromium plated waste coupling 32mm dia fittings and PVC waste pipe complete all as specified and as directed.

S&F in repairs stainless steel plate rack of size 900x 750 x 250 mm made of 1mm thick stainless steel all as specified and directed by Engr-in-Charge.

S&F in repairs ISI marked 15mm bore, chromium plated bib tap long body fancy type of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs 15 mm dia bore cast copper alloy chromium plated angle cock/stop cock with long shank and cup (concealed type) screwed down high pressure with capstan head, screwed both ends for iron pipes or for union and fixed, complete all as specified and as directed.

S & F in repairs 15 mm dia bore fancy type pillar taps ,cast copper alloy chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with capstan head, screwed for iron pipes or for union and fixed, complete all as specified and as directed.

S&F in repair 32 mm CP Waste coupling for Sink/WHB complete all as specified and as directed

S&F in repair 32 mm Waste pipe for sink and WHB complete all as specified and as directed

S&F in repair brass chromium plated over head shower rose with arm 125 mm size with long body with swivel joint including fixing to steel pipe or union, complete all as specified and as directed.

S & F in repair Vitreous China squatting pan, `Orissa` pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern) complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) coloured (including two Nos fixing bolts incl PVC seat cover but excluding flushing cistern and flush pipe) complete including making good to floor with and including fixing of P or S trap, complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (Cascade pattern) coloured, fancy type (including two Nos fixing bolts incl PVC seat cover but including flushing cistern and flush pipe) complete including making good to floor with and including fixing of P or S trap, complete all as specified and as directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets., flush pipe of polyethylene of low or high density or PVC 32mm dia for low level flushing cistern, PVC connection 450 mm long complete all as directed by Engr-in-Charge.

Taking down and refixing WHB / Sink / Plate Rack / Flushing Cistern etc any size and making good to surface when wall tiling etc are done in those areas complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repair soap dish, brass, chromium plated fixed to wall with brass chromium plated screw, complete all as specified and as directed.

S&F in repair CP towel rail 20 mm dia D type, 60 cm long fixed with CP screws and rowel plug in wall, complete all as specified and as directed.

S&F in repair sheet glass shelf / corner shelf consisting of 5.5mm thick sheet glass self assembly 12cm width with chromium plated guard and railing 60cm long, complete all as specified and as directed.

S&F in repair 20 mm dia stainless steel , curtain rails, chromium plated with fixing bracket stops, rollers etc, complete all as specified and as directed.

S&F in repair 140 mm dia CP grating incl joints with solvent cement complete all as specified and directed.

S&F in repair rotational moulded PVC water tanks cylinderical with closed top hoisted and fixed in position of 500 Ltrs capacity all as specified in SSR Part I including dismantling existing tank.

S&F in repair rotational moulded PVC water tanks cylinderical with closed top hoisted and fixed in position of 1000 Ltrs capacity all as specified in SSR Part I including dismantling existing tank.

S&F in repair 20 mm PVC float valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and as directed.

S&F in repairs PVC water tank cover of any capacity (500/1000 Ltr) fixed with binding wire tightly all as specified and directed

Repairs to Bath room/Toilet/Kitchen Floor traps by replacing the damaged Floor traps and connected waste pipes with new floor traps and waste pipes. The joints of traps and waste pipes shall be done properly/leak proof and re-fixing the same floor/wall etc and the surfaces finished even to match with the existing surface including demolition of concrete if required and making good to surface using PCC 1:2:4 type B1 (using 20mm graded stone aggregate) or CM 1:4 and tiling as required complete all as specified and as directed. Note:- Quantity of floor/wall tiles shall be measured and paid seperately under the relevant items.

S&F in repair PVC (SWR) pipe 110 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joint fixed to walls with clamp including taking down all as specified and directed.

S&F in repair PVC (SWR) pipe 75 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joint fixed to walls with clamp including taking down all as specified and directed.

S&F in repair PVC (SWR) bend any radius, 110 mm dia all as specified and directed.

S&F in repair PVC (SWR) junction single 'T' equal with access door 110 mm dia complete all as specified and directed.

S&F in repairs low density polyethylene (LDPE) pipe of pressure rating 6 Kg/Sqcm, 50mm bore including accessories, complete all as specified and as directed.

Demolition of any existing roof treatment including layer of bitumen felt, concrete padding,tiling and benching including hacking for key, scrubbing down with water complete to receive new roof treatment including rubbish off the factory premises complete all as specified and directed. (any thickness) and removing to distance 0.5 km to 1.5 km

M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3

M&L for rendering 15 mm thick in CM 1:3 on fair faces of brick or concrete surface finished even and smooth without using extra cement and using WPC @ 3% by weight of cement. Note:- Water proofing compound will be measure and paid separated.

Supply only integral waterproofing compound

M & L for Providing and applying Fiber reinforced elastomeric liquid applied waterproofing membrane, formulated with PU hybrid polymers andr einforcing acrylic fibers and can bear upto 10 bar hydrostatic pressure by using Asian paints Smartcare Damp Proof Ultra or equivalent and having Sun Reflectivity Index(SRI) of 106.59 on top of concrete roof in three coats@10 liter/10 sqm. One coat of self-priming of elastomeric waterproofing liquid(dilution with wateer in the ratio of 3:1) and second coat of undilutated elastomeric waterproofing liquid, followed by 3rd and final coat of undiluted elastomeric waterproofing liquid(dry film thickness of complete application/system not less than 200 microns) with waterproofing guarantee of 10 years. Prior to all this activity surface preparation to be done by removing Dust, Algae, Fungus, Oil, grease, etc and crack filling after making V-section groove by Smartcare Textured or equivalent crack filler wherever required. For Tile mosaic surface use Smartcare Terrrace Tile primer or equivalent for better adhesion. Use geotextile fleece for accessible terraces. The item rate is inclusive of all material with wastage, labor, Tools, Tackles, Consumable, Scaffolding, etc.

M&L Providing, cement concrete type B 0, 1:2:4(12.5 mm graded aggregate) in roof kerbs or mud stops, chajja ,parapet wall rounded or chamfered on edges span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L for preperation of old decorated surface of wall washing rubbing down and stopping of distempered and painted surfaces and applying two coat of oil bound distemper on wall specified and directed

M&L for preparation of old plaster surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489-2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over two coat of dmprf white new surface complete all as specified and directed.

M&L for coloured glossy finish Chequered cement concrete tiles 20cm x 20cm x 25mm thick, With white cement & pigment set, jointed and pointed in neat cement slurry and painted in white or coloured cement in floors incl 15mm thick screed bed in CM (1:6) complete all as specified and directed

M&L for coloured, glossy finish precast 60mm thick cement concrete interlocking pavers/ tiles Grade M-35 made with grey cement and pigment manufactured by automatic hydraulic compression with high compressive strength, any size, pattern and shape as approved by GE, laid dry over 30mm thick sand cushion in patteerns with different colour paver block /tiles as in path, complete allas spd and directed

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate ) as in kerb / coping including necessary form work etc complete all as specified and directed

M&L for 100 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in Sub base for path/hard standing ,complete all as specified and as dircted.

Material and Labour for Petty repair to 15mm bore dia of bib taps, pillar taps, stop cocks, concealed stop valves, wall mixture, basin mixture etc or of similar nature job of any description by replacing the nylon washer , brass spindle , nipple where necessary complete in all respect as specified

S&F in repair internal syphone assembly for cistern PVC LL / cascade type integral type closet of best quality as specifed and directed

S&F in repairs PVC water closet seat cover white, closed pattern and mild steel chromium plated or aluminised hinging device

S&F in repairs PVC Eaves Gutters for Rain Water half rounded 250 mm dia including outlet to rain water pipe and stop end angle etc. and necessary fixing arrangement complete all as specified and as directed. .

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets.

S&F 4mm thick asbestos cement plain building board, fixed in ceilling flat or sloping to timber frame work with screws complete all as specified and as directed.

Supply and fix false ceiling work of galvanised iron powder coated frame work of size 28x24x0.9mm thick angle, snap grid size (605mm X 605mm) frame work with Hangers 6mm dia. GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expension hold fasteners 12.5mm dia. 40mm long and including necessary boldt, nuts and washers for flase ceiling with and including 4mm thick of size 600mm x 600mm HPSC (High pressure steam cured) prelamainated self embosed, textured disigner board E classic board as in ceiling tile fixed or laid/ inserted to framework complete all as specified and directed.

Welding in repairs exc 2.5cm but n exc 5cm in length in thickness of metal not exc 6mm complete all as specified and as directed.

Disconnecting existing water tanks (exc 250 lts not exc 500Ltrs), setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

Disconnecting existing water tanks (exc 500 lts not exc 1000Ltrs), setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing measured separately)

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.(date of cleaning shall be written with white paint on each tank after cleaning) (exc 250 lts not exc 500Ltrs)

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.(date of cleaning shall be written with white paint on each tank after cleaning) (exc 500 lts not exc 1000Ltrs)

S&F in repair second class hard wood in scantlings clean sawn in framed or unframed works as ordered

S&F in repair 15mm dia bore long body bib Cock PTMT fency type any colour high pressure screwed down for iron pipe 15 mm bore

S&F in repair 15mm dia bore Swan neck bib Tap PTMT any colour high pressure screwed down for iron pipe 15 mm bore

S & F in repair 15 mm dia bore fancy type Swan Neck PTMT pillar tap any colour high prissure screwed for iron pipes or for union and fixed, complete all as specified and as directed.

S&F in repair chromium plated hand shower (health fauset), telephonic type with 8mm dia, 1 meter long CP flexible tube with wall hook and jet of approved make, suitable for 15 mm bore iron pipes or for unions and fixed complete all as specified and directed.

S&F in repair 15mm dia bore two in one bib Cock CP fency type screwed down for iron pipe 15 mm bore

S&F in repair toilet paper holder, twin type CP fixed to wall with chromium plated brass screws and rawl plugs.

S&F in repair Vitreous china urinals, half stall type (back or corner wall type), complete incl providing & fixing plugs, bedding urinal against wall in CM 1:2, suring urinals to plugs with and incl 60mm long brass screws, pointing around urinals back in cement incl PVC connection 600mm long, waste pipe 32 mm dia, push button tap 15mm of cast copper alloy, screwed down for iron pipe and fixed complete all as specified and directed

S&F, Aluminium(Die cast)body Door closer hydraulically regulated,designation No3,universal type,suitable for shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified & directed.

S&F in repairs and fixed Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty floor spring for aluminum/glass door shutter of required size and making good to surface complete all as specified and directed

Minor repair/Taking down and refixing in same opening of aluminum/glass doors, windows, partitions and making good the same (i.e. Handles, hinges, rubber beadings, clips etc) complete all as specified and directed

S&F in repairs aluminium Mortice lock, vertical type, size 75 mm 4 Levels complete all as specified and directed

S&F for ACP boards in repairs 4.00 mm thickness as in panel of door shutters/partition wall including AC beadng etc complete all as specified.

S&F in repair 5.5mm thick plain glass, ordinary quality and glazing with oil putty/aluminium glazing clips in squares n.exc 0.5 Sqm in each pane

As per above item No 138 but exc 0.5 Sqm in each pane 5.5 mm thick sheet glass.

M/S DURGA CONSTRUCTION & CO (BID ID -3313771)

M/S D P BERLIA (BID ID -3312457)

D.D Construction (BID ID -3315763)

M/s KL Agarwalla & Co (BID ID -3312666)

pintoo construction (BID ID -3312316)

M/s Krishna Construction (BID ID -3312074)

M/s Sashi Enterprise (BID ID -3316063)