CA NO CWE BTD 50 of 2019-20 Special repairs to Bldg No T-18 to T-20 T-26 to T-28 , T-35 to T-39 and T-44 of Engr Regmt at North Campus at Bathinda Mil Stn under GE (North) Bathinda

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exc 1.5 Sqm each and removing from site including cutting holes for removal of hold fast complete.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified in Preamble 8B.3.1 of SSR Part -II (2010) and all as shown on drawing of SSR Part-II (2010).

S&F factory made solid PVC moulded door shutter (With wood free EPS Core) 28-30mm thick (style) with 2 , 4 or 6 raised panel design with 2 mm moulded PVC sheet on front face and 2 mm plain coloured sheet on back face , with profile board core , fixed in frame as per instruction and drawing shown for item No 8101 and as specified in preamble 8B.4.1 of SSR Part II. (2010)

S & F butt hinges, stainless steel of size 75mm long .

S & F 100mm long aluminium anodised handle, cast type.

S & F 100 mm long aluminium anodised barrel tower bolts of extruded section .

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4 Sqm each and removing from site including cutting holes for removal of hold fast complete.

S&F factory made pressed steel frames for door with one or more rebates including necessary fixing lugs, lock strike plate, hinges etc, compete, all as specified of frame size 105 mm x 60mm & thickness of MS sheet shall not be less than 1.25 mm including making holes for fixing hold fast etc and making good the wall with plaster in cement mortar (1:6) complete.

S&F factory made pressed steel frames for door with one or more rebates including necessary fixing lugs, lock strike plate, hinges etc, complete, all as specified of frame size 125 mm x 60mm & thickness of MS sheet shall not be less than 1.25 mm including making holes for fixing hold fast etc and making good the wall with plaster in cement mortar (1:6) complete.

M & L for PCC (1:3:6) type C-0 using 12.5 mm graded stone aggregate in filling in chowkats / door frame or bed block of hold fast and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete.

S & F 35mm thick factory made panelled shutter (two panel) plain framed with lock rail and panel of 12mm thick veneered particle board with commercial veneering on both faces conforming to IS-3097 exterior grade kiln seasoned and chemically pressure treated of second class hard wood rails and styles and the size of rail and style as per IS-1003 (Part I).

S & F factory made glazed and skeleton shutters 35mm thick using second class hard wood open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc; sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24(a); all as specified complete.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples complete.

S & F mild steel barrel tower bolts, stove enamelled black, with bright bolt, length of bolt 200mm.

S&F mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, length of bolt 250mm.

S & F 150 mm mild steel pressed handles, oval type, stove enamelled black.

S & F floor door stopper of aluminium alloy body and tongue, ISI marked, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm.

S & F 300 mm long MS ordinary rat tail rod pattern springs for doors including roller and roller plate complete.

S & F factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including one shop coat painting including taking down old window as directed.

S & F factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded including one shop coat painting including taking down old window all as directed.

S & F factory made top hung shutter steel window / ventilator complete including one shop coat painting including taking down old window/ventilator all as directed.

S & F MS framed work such as grills, gratings, guard bars etc., with end of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290 Gde E-165.

S & F sheet glass, 4 mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane fixed with oil putty or wooden beads including Provn of glazing pins/spring clips wherever necessary.

M & L for painting to new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces.

M & L for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces.

Demolition of stone slab and tiles of any description or thickness in floor , aprons etc laid , bedded and pointed in any mortar and removing the debris upto a distance exceeding 1 km but not exceeding 2 km etc complete all as specified.

M & L for 75 mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base under floor complete all as specified.

M & L for Rubber Moulded precast interlocking paver block factory made, any colour, shape and size as approved by GE, conforming to IS 15658-2006 of 80 mm thickness, made out of M-40 grade with and including minimum 25 mm thick sand cushioning below interlocking paving block complete laid dry of any description of thicknes in floors, aprons etc complete all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour as approved, having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including dismantling of any type / size of sheet in roof coverings complete all as specified of Make : M/s TATA blue scope , M/s CRIL , M/s JSW Steel Ltd

S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour as approved, having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including dismantling of any type / size of sheet in roof coverings complete all as specified of Make : M/s TATA blue scope , M/s CRIL , M/s JSW Steel Ltd

S & F aluminium anodised snap grid frame work 605mm x 605mm for false ceiling comprising of main / cross tee / wall angle weighing not less than 0.36 Kg/RM to be fixed to ceiling with 6mm dia GI wire supporting hanger upto 1200mm length adjusting level fixed to roof slab at 600 mm c/c by means of 'J' bolt with necessary bolt , nuts and washers or expansion hold fasteners 12.5mm dia and 40 mm long as per manufaturer's instruction including M & L for 12 mm tapered edge gypsum board of size 600 x 600mm (conforming to IS-2095-1982) shall be screw fixed to ceiling section with 25 mm dry wall screws at 230 mm centre to centre , screw fixing shall be done mechanically either with screw driver or drilling machine with suitable attachment and finally the boards shall be jointed and finished so as to have a flush look including dismantling of old false ceiling of any type / any size complete all as specified.

M & L for RCC (1:2:4) type B1 using 20mm graded stone aggregate as in slab supported on walls , beams and columns in floors , roofs , landings , balconies , canopies , deck slabs , shelves and the likes complete all as specified.

M & L TMT bar 10 mm dia and over cut to length bent to shape required including cranking , bending , spirally for hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified.

M & L for precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in manholes cover slab and set in CM 1:4 including use and waste of necessary form work complete all as specified.

M & L for salt glazed stoneware drain pipes, grade 'A', laid in trenches and jointed complete for 150 mm internal dia of pipe including demolition and breaking up any size drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar.

M & L for concrete bed to 150 mm bore of drain pipes including packing under, and haunching against the sides of the pipes after they are laid and tested; in PCC (1:3:6) type C2 using 40mm graded stone aggregate.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete (1:2:4) type B-1 smooth finished, and reforming benching as required for 150mm dia pipe complete all as specified and as directed.

S & F in repairs vitreous china wash down water closet pan (EWC) (pedestal pattern) white and trap including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe including white coloured closed pattern seat cover and fixing bolt (excluding flushing cistern and flush pipe) including making good to floor complete.

S & F in repairs vitreous china squatting pan, 'Orissa' pattern, size 580mm x 440mm, white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor and excluding flushing cistern, flush pipe and waste pipe complete.

S & F in repairs PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC flushing pipe 32mm dia complete.

S & F in repairs vitreous china wash basin, white, flat back, size 550mm x 400mm including cromium plated , fancy type , pillar tap , waste coupling , PVC waste pipe of 32 mm dia and fixed on existing brackets complete, .

S & F in repairs, chromium plated soap tray of size 100 x 100 x 60mm and fixed on wall with chromium plated brass screws complete.

S & F in repairs, PVC connections 15 mm bore, 450 mm length, heavy duty, with PTMT nuts complete.

S & F in repairs brass chromium plated shower rose 125 mm size with or without swivel joints fix to steel pipe or union complete all as specified and as directed.

S & F in repairs chromium plated, fancy type, quartern turn, stop valves / Angle valve, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for 15mm bore dia of pipe.

S & F in repairs, 15 mm dia bore chromium plated concealed stop valves of cast copper alloy, with crutch or butterfly handle, fancy type, quartern turn,with long shunk & cup etc. complete all as specified and as directed.

S&F in repairs, 15 mm bore chromium plated, fancy type, bib taps cast copper alloy quarter turn with crutch or butterfly handle, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S&F in repairs, brass chromium plated tubular towel rail, 20 mm dia, D type, 600 mm long between flanges fixed with CP screws and wooden cleats.

S&F in repairs vitreous china full stall type urinal white including grating and union for discharge pipe including providing and fixing plugs bedding urinal against wall in CM 1:2 , securung urinals to plugs with and , urinal spreader , connection to trap, and to flushing pipe etc. but excluding flushing cistern, flush pipe & waste pipe complete all as specified..

S&F in repairs 20mm dia decorative harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc as in curtain rails. (Note : The cost of brackets and knobs is deemed to be including in the quoted unit rate. Nothing extra shall be paid on this account.)

M & L for 15 mm bore GI pipe, medium grade, ISI marked, with all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down 15 mm bore existing steel tubing and connections complete.

S & F PVC (SWR) 110mm bore pipes, ISI marked, single socketed, in any length with rubber ring joints, laid in trenches or floor. (measured overall as fixed along the centre line over fittings and accessories)

S & F 110 mm bore PVC bends ISI marked of any radius / shoe, fixed to PVC pipes all as directed.

S & F PVC (SWR) 75mm bore pipes, ISI marked, single socketed, in any length with rubber ring joints, laid in trenches or floor. (measured overall as fixed along the centre line over fittings and accessories)

S & F 75 mm bore PVC bends ISI marked of any radius / shoe, fixed to PVC pipes all as directed.

M & L for non skid coloured ceramic tiles of size minimum 400mm x 400mm, 7 to 8 mm thick (square/rectangular), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile with including 15 mm thick Screed bed or bedding layer in CM (1:6) etc including dismantling old existing tiles etc and removing rubbish to a distance exceeding 1 km but not exceeding 2 km etc completecomplete all as specified. Note : Only course sand shall be used in screed bed.

S & F glazed ceramic coloured tiles 450 x 350mm, 7 to 8mm thick in verticle surfaces such as dado / skirting, set and jointed in neat cement slurry and pointed in white or coloured cement pigmented to the match the shade of tiles laid over and including 10 mm thick rendering in cement mortar (1:4) as backing coat and finish the surface rough to receive the tile including dismantling old existing tiles including raking out joints, hacking for key , scrubbing down with water etc and removing rubbish to a distance exceeding 1 km but not exceeding 2 km etc completeon brick or stone walls etc complete all as specified.

M & L for double chared vitrified tiles of size minimum 600mm x 600mm, 9 to 10 mm thick (square/rectangular), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile with including 15 mm thick Screed bed or bedding layer in CM (1:6) etc including dismantling old existing tiles etc and removing rubbish to a distance exceeding 1 km but not exceeding 2 km etc completecomplete all as specified. Note : Only course sand shall be used in screed bed.

M&L for machine cut kota stone slab flooring 18 to 20 mm thick minimum size 450 x 450mm , set and jointed in neat cement slurry with pigment and pointed in white or coloured cement to match the shade including 15 mm thick Screed bed or bedding layer in CM (1:4) including rubbing and mirror polishing etc complete all as specified.

S & F 75 mm dia cast iron floor trap with cromium plated grating incluing jointing to waste pipe fixed in cement concrete (1:2:4) type B-1, complete all as specified.

S & F grating dome 100 mm size of PTMT (Minimum weight 25 gram) complete.

M&L for rendering 15 mm thick in cement mortar (1:6) on internal wall surfaces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement including taking down old cement plaster including raking out joints hacking for key scrubbing down with water etc and removing rubbish to a distance exceeding 1 KM but not exceeding 2 KM etc complete all as specified.

M&L for rendering 15 mm thick in cement mortar (1:4) on external wall surfaces of brick work or concrete surfaces even and fair without using extra cement mixed with integral water proofing compound as per manufacturer's instruction including taking down old cement plaster including raking out joints hacking for key scrubbing down with water etc and removing rubbish to a distance exceeding 1 KM but not exceeding 2 KM etc complete all as specified. (Note : WPC shall be measured and paid for separately.)

M & L for Brick work using old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6), including demolition of old brickwork or stone masonry of any type.

S&F 500 litres capacity Rotational moulded polyethylene in white colour, three layered, water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old water tank of any size and any type and removing rubbish to a distance exceeding 1 km but not exceeding 2 km etc all as directed.

S&F ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 455 gram).

S&F in repairs stop valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for 20 mm bore dia of pipe.

M & L for providing and injecting chemical emulsion for post constructional anti-termite treatment along external wall where the apron is not provided using chemical emulsion @ 7.5 litres per Sqm of the vertical surface of the sub structure to a depth of 300mm including excavating channel along the wall and rodding etc complete.

M & L for providing and injecting chemical emulsion for post constructional anti-termite treatment of soil under existing floors using emulsion @ 1.00 litre per hole, 300mm apart including drilling and plugging 12mm dia holes with CM (1:2) (1 cement : 2 coarse sand) to match the existing floors.

Supply only integral water proofing compound, ISI marked.

M & L for applying efflorescence registance chemical used on plastered surfaces to reduced the efflorescence from the brick wall as per manufacturer's instruction complete.

M & L for preparation of newly plastered surfaces of external walls and apply Two coat of Cement base paint over a coat of alkali resistant primer all as specified.

M & L for preparation of newly plastered surfaces of walls and applying the following:- (i) Applying wall care putty in two coats on wall surfaces & smoothening the surface with sand papers / mechanized sanding etc (preparatory to paint as directed) complete all as specified. (ii) Two coats of 100% acrylic emulsion paint by using airless spray / roller over and including a coat of acylic internal primer. Note :- Contractor may use manual tools for surface preparation with prior approval of Engg- in- charge in writing in case use of mechanical equipments are not possible.

Complete removal of existing treatment of wall (any number of layers) by scrapping with steel wire brushes or any other means, including filling depressions of scrapped surfaces and apply two coats of Cement base paint over a coat of alkali resistant primer on old prepared surfaces all as directed.

Complete removal of existing treatment of wall (any number of layers) by scrapping with steel wire brushes or any other means, including filling depressions of scrapped surfaces and apply two coats of acrylic emulsion paint over a coat of acrylic internal primer on old prepared surfaces all as directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specifed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specifed.

Internal Electrification

Taking down carefully existing unserviceable copper / aluminum point wiring (light, fan, socket) complete including removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, light fittings etc except concealed conduit and sunken boxes and removing the retrieved materials from site including making good the disturbed surface of walls, floors, ceilings etc to match with the adjoining work complete all as specified and directed.

M & L for point wiring with multi stranded copper conductor FRLSH cable, 1100 volts grade PVC insulated and unsheathed of size 1.5 Sqmm single core in existing PVC concealed / surface conduit and existing sunken box with new 3 mm thick bakelite laminated sheet top cover for one fan / exhaust fan / light point controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed with single core, multi stranded copper conductor FRLSH cable as earth wire to common earth & connecting to earth dolly all as specified and directed.

All as per item No 81 here in before but for socket outlet 5 pin, 6 Amp on independent board but not below the switch board complete all as specified .

All as per item No 81 here in before but for one socket outlet 6 pin, 6/16 Amp multipurpose 2 in 1 on independent board with cable of 2.5 Sqmm, multi stranded copper conductor FRLSH cable including provision of 2.5 Sq mm PVC insulated solid copper conductor FRLSH cable continuos as earth wire connected to earth dolly, conductor etc.

Taking down carefully existing unserviceable copper / aluminum point wiring (light, fan, socket) complete including removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, light fittings etc including concealed conduit and sunken boxes and removing the retrieved materials from site including making good the disturbed surface of walls, floors, ceilings etc to match with the adjoining work complete all as specified and directed.

M & L for point wiring with multi stranded copper conductor FRLSH cable, 1100 volts grade PVC insulated and unsheathed of size 1.5 Sqmm single core in and including rigid PVC concealed conduit not less than 20mm dia ( medium duty ISI marked) and conduit fittings with junction box , MS sunken box of 1.6 mm thick and including 3 mm thick bakelite laminated sheet top cover for one fan / exhaust fan / light controlled by one switch including provision of 1.5 Sqmm PVC insulated & unsheathed with single core, multi stranded copper conductor FRLSH cable as earth wire to common earth & connecting to earth dolly including cutting chases and making good disturbed surfaces complete all as specified and directed.

All as per item No 85 above but for one bell point

All as per item No 85 here in before but for socket outlet 5 pin, 6 Amp on independent board but not below the switch board complete all as specified .

All as per item No 85 here in before but for socket outlet 5 pin, 6 Amp on same board complete all as specified .

All as per item No 85 here in before but for one socket outlet 6 pin, 6/16 Amp multipurpose 2 in 1 on independent board with cable of 2.5 Sq mm, multi stranded copper conductor FRLSH cable including provision of 2.5 Sq mm PVC insulated solid copper conductor FRLSH cable continuos as earth wire connected to earth dolly, conductor etc.

S & F Switch semi modular with frame cover, flush type, single pole, one way, 5/6 Amp .

S & F Switch semi modular with frame cover, flush type, single pole, one way, 15/16 Amp .

S & F Blanking plate of of plastic suitable for DBs box .

S & F Semi modular socket, multipurpose, 2 in 1, 5 Pin, 6 Amp, flush type, including decorative frame cover. (Note : Switch and socket shall be of same make.)

S & F Semi modular socket outlet universal, multipurpose, 2 in 1, 3 Pin 6 Amp and 6 pin 16 Amp, flush type, including decorative frame cover. (Note : Switch and socket shall be of same make.)

S&F, fan regulator electronic step type (1-5), flush socket type 230-240 Volt, AC supply, complete all as specified and directed.

S&F ceiling rose, 3 plate, surface bakelite type, Polycorbonate body, 6 Amps, 250 Volts AC, 65 x 50 mm, two to three terminal (ISI marked) complete all as specified.

S & F in replacement , jumbo batten holder of PVC/Polycarbonate type with jumbo skirt suitable for batten fitting including of 9/10 watt LED bulb complete all as specified..

S&F electric / electronic bell, ding dong type, 230 Volt, AC supply complete all as specified.

S&F 6 Amps bell push switch, 230 volts AC, ISI marked complete all as specified and directed.

S & F sheet metal enclosures double door made out of CRCA mild steel sheet, flush mounting, acrylic door, IP-43 protection, 8 way, DB SPN 230 Volts, with 200 Amp rated bus bar, dust and vermin proof suitable for fixing MCB's and Isolators etc including taking down old unserviceable DB.

S & F sheet metal enclosures double door made out of CRCA mild steel sheet, flush mounted, acrylic door, IP-43 protection, 4 way, DB TPN 415 Volts, with 200 Amp rated bus bar, dust and vermin proof suitable for fixing MCB's and Isolators etc including taking down old unserviceable DB.

S & F MCB, SP, 6 to 32 Amps, 'C' curve, 230 Volts, breaking capacity not less than 10 KA with over load and short circuit protection including taking down old unserviceable MCB SP complete all as specified.

S & F MCB, SPN, 32 Amps, 'C' curve , 230 Volts, 50 Hz, breaking capacity not less than 10 KA with over load and short circuit protection and including taking down old unserviceable MCB complete all as specified.

S & F MCB, TPN, 63 Amps, 'C' curve , 415 Volts, 50 Hz, breaking capacity not less than 10 KA with over load and short circuit protection and including taking down old unserviceable MCB TPN complete all as specified.

S & F single pole and neutral enclosure made out of CRCA steel sheet factory made with two pin and earth plug and metal top DB 230V with neutral and earth link and 200 Amp rated bus bar complete including taking down old unserviceable DB.

M & L for sub main wiring with 2 single core cable PVC insulated unsheathed of copper multi strandard conductor FRLSH cable of size 6 sqmm, 1100 votls grade drawing through in and including PVC concealed conduit 20 mm dia medium duty including acessories such as Tee, bend, Elbow etc, ISI marked with and including PVC insulated 6 sqmm unsheathed multistranded FRLSH copper conductor cable for earth continuity and connected to common earth dolly including cutting chasing of wall, if required and making good disturbed surface in CM (1:3) and finishig the surface to match with existing surface etc including taking down old unserviceable wiring 6 Sqmm complete all as specified. Note:- Two runs of cable, one run of earth wire and one run of PVC conduit shall be measured as one unit.

M & L for sub main wiring with 2 single core cable PVC insulated unsheathed of copper multi strandard conductor FRLSH cable of size 4 sqmm, 1100 votls grade drawing through in and including PVC concealed conduit 20 mm dia medium duty including acessories such as Tee, bend, Elbow etc, ISI marked with and including PVC insulated 4 sqmm unsheathed multistranded FRLSH copper conductor cable for earth continuity and connected to common earth dolly including cutting chasing of wall, if required and making good disturbed surface in CM (1:3) and finishig the surface to match with existing surface etc including taking down old unserviceable wiring 6 Sqmm complete all as specified. Note:- Two runs of cable, one run of earth wire and one run of PVC conduit shall be measured as one unit.

S & F 18/20 watt Retro LED tube light fitting, wall/surface mounted, IP 20 protection, conforming to IS 16106/IS 16107, minimum 6000K batten decorative type 4 feet long polycarbonate body, white, in built LED driver, power factor>0.95 , Make all as per Crompton Cat Part No. DMLN1LT8-16 (for batten) and Cat part No. LT8-20-865-2 (for tube light) including 18/20 watt tube rod or equivalent model of any make given in Appx 'B' connecting to electric point by using PVC insulated twin core copper conductor cable of suitable size including taking down old existing light fitting all as directed..

S & F LED mirror light fitting of 09/10 watt, 6000K, linear & compact with decorative grey end caps, polycarbonate body and ribbed opal diffuser complete including 07 watt tube rod make all as Model No LCTL-9-CDL of Crompton or equivalent model of approved make from list of make given in Appx 'B' including connecting to electric point by using PVC insulated twin core copper conductor cable of suitable size including taking down old existing light fitting all as directed.

S & F LED recessed ceiling mounted light fitting, high efficiency 2' x 2' glare free, homogeneous luminaries 36 Watt 5700K all as per Crompton cat part No LCTLRN-36-FO-CDL or equivalent model of approved make given in list of make Appx 'B' including connecting to electric point by using PVC insulated twin core copper conductor cable of suitable size complete including taking down old existing light fitting all as directed.

S & F energy saving LED street light fitting of 25 Watt with PDC aluminium housing with individual LEDs with modular secondary optics and IP-66 degree of protection , better optics for uniform distribution street/roadway luminaire with high 25 watt LED Lamp complete fitting with driver , LED strip and all other accessories etc , PF>0.95 with voltage range 140 to 270 Volt, suitable for direct mounting on pipe bracket , fixing on pole/along the wall complete with and including GI bracket made out of 40 mm dia light grade GI Pipe - 01 No, MS clamp - 02 Nos, bent to shape including two coat of aluminium paint over a coat of primer and making electrical connection with providing of 1.50 metre long twin core round copper conductor cable of suitable size and testing complete all as per SYSKA Cat part No SSK-SLF-CF-25W-WL or equivalent model of any make given in Appx 'B', Cat Part No. as approved by GE complete all as specified including taking down old unserviceable existing street light fitting of any type and capacity from pole/wall along with accessories including making good disturbed surfaces with cement mortar (1:4) all as directed.

M & L in replacement of earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground to depth of pit not less than 2.25 m below normal ground level with top edge of the plate not less than 1.5 m below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal / coal dust and common salt filling in alternate layers and connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel including GI protection pipe 15mm dia light grade upto the extent of 7.5 metre and connecting to earthing test point, main switch board including GI pipe 20 mm dia light grade for watering, MS funnel and bringing out the watering pipe upto 30 cm above the normal ground level plugged at top including all fitting including PCC earth pit with PCC 1:2:4 type B-1 using 20mm graded stone aggregate and RCC pit cover including necessary earthwork and excavation in any type of soil complete all as specified as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note :- (a) PCC chamber shall be constructed at least 1.5 m away from earth pit. Pipe for watering shall be provided in slanting manner. (b) 4mm dia GI wire and 15mm dia light grade GI protection pipe upto 7.5 metre shall deemed to be included in quoted rate.

G N CONSTRUCTIONS

SAPNA BUILDERS

M/s RAMESH KUMAR VERMA CONTRACTORS

M/s Kamal Builders

M/s MITTAL CONSTRUCTIONS

R K GOYAL & COMPANY