Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.3 LAccepted-AOC SCF 15 HUDA COMPLEX 184 NEW IDC 124001 | ROHTAK | HARYANA | 124001 | L1 | Accepted-AOC accepted | |
| 2 | L2₹9.7 L+₹41,615.60 (4.48%)Rejected-AOC H NO 787 22 JHANG COLONY ROHTAK 124001 | ROHTAK | HARYANA | 124001 | L2 | Rejected-AOC rejected | |
| 3 | L3₹10.9 L+₹1.6 L (17.7%)Rejected-AOC | L3 | Rejected-AOC rejected |
| Sl No | Description | Qty | Unit | Highlight Associates and Contractors L1 | Janta Electric Store L2 | S.S. Enterprises L3 |
|---|---|---|---|---|---|---|
| 1.00HSR Items | ||||||
| 1.01 | [13.30.1]Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 1. Hot finished welded type tubes [Through Rate] | 500 | P.Kg. | 40 ₹20,000 Lowest | 110 ₹55,000 | 125 ₹62,500 |
| 2.00 | [17.69.2]Interlocking Concrete Block Pavement 2. Providing and Laying 80 mm thick ISI marked Interlocking Paver Blocks conforming to IS 15658:2006/IRC SP 63: 2004 of all shapes and colours in design mix cement M 40 over the bed of 30 mm thick fine sand complete in all respect. [Through Rate] | 67.2 | P.Sqm | 75 ₹5,040 Lowest | 553 ₹37,161.6 | 750 ₹50,400 |
| 3.00 | [20.84]Providing and fixing of insulated rubber matting suitable for 11 KV installation 1 M x 2 M x 12 mm thick (IS code 15652-40091) as per specification complete and as per directions of Engineer-in-charge [Through Rate] | 4 | Each | 1,500 ₹6,000 Lowest | 2,000 ₹8,000 | 1,500 ₹6,000 Lowest |
| 4.00 | [9.33]Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm ( plus 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. [Through Rate] | 84 | P.Sqm | 50 ₹4,200 Lowest | 625 ₹52,500 | 600 ₹50,400 |
| 5.00NS Items | ||||||
| 5.01 | Supply, Erection, Testing and Commissioning of Retrofit Emission Control Device (RECD) with heat resistant ferrite stainless steel corrosion resistance for CPCB1. 160 KVA to 250 KVA rated Engine Family with installation on existing Geneset for Fabrication of all work, removing of old silencer and commissioning of New RECD Device on Genset etc. and compliance with commission for Air ducting Management (Direction No.76) with CPCB regulation type complete in all respect up to entire satisfaction of Engineer-in-charge of the work.
Make: - M/s Platino Automotive Pvt. Ltd. / M/s Chakr Innovation Pvt. Ltd. / M/s Vasthi Instruments Pvt. Ltd. | 2 | Each | 4,45,000 ₹8,90,000 | 4,02,597 ₹8,05,194 Lowest | 4,55,000 ₹9,10,000 |
| 6.00 | Supply and Erection of mild steel bucket stand suitable for 6 Nos. fire buckets, with 6 nos bucket including the cost of welding and painting of complete stand will one coat of red oxide and 2 coats of approved paint of red colour with all labour and material required to complete the job in all respect up to the entire Satisfaction Engineer-incharge of the work (size 6x4 made of GI pipe 32mm dia). | 3 | P.Set | 1,500 ₹4,500 Lowest | 4,500 ₹13,500 | 5,000 ₹15,000 |
Tender Value
₹11.3 L
EMD Value
₹22,540
Closing Date
11 Nov 2025, 5:00 pmClosed
AMIT GOYAL
ED - Rohtak
Providing Retrofit emission control device in 250 KVA and 200 KVA DG sets installed in Circuit House and Nirman Sadan at Rohtak
2025_HRY_481424_1
20255246A37D BAF9 461E A4F0 B9FFBAC427EA667BAR
Open Tender
Electrical Works
Works
60 days
Rohtak
Technical documents as per approved DNIT conditions.
3 documents required · 3 mandatory
₹1,000
₹22,540
Yes
4 Dec 2025
4 Nov 2025
12 Nov 2025
4 Nov 2025
11 Nov 2025
4 Nov 2025
Amount
HSR Items
[13.30.1]Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 1. Hot finished welded type tubes [Through Rate]
[17.69.2]Interlocking Concrete Block Pavement 2. Providing and Laying 80 mm thick ISI marked Interlocking Paver Blocks conforming to IS 15658:2006/IRC SP 63: 2004 of all shapes and colours in design mix cement M 40 over the bed of 30 mm thick fine sand complete in all respect. [Through Rate]
[20.84]Providing and fixing of insulated rubber matting suitable for 11 KV installation 1 M x 2 M x 12 mm thick (IS code 15652-40091) as per specification complete and as per directions of Engineer-in-charge [Through Rate]
[9.33]Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm ( plus 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. [Through Rate]
NS Items
Supply, Erection, Testing and Commissioning of Retrofit Emission Control Device (RECD) with heat resistant ferrite stainless steel corrosion resistance for CPCB1. 160 KVA to 250 KVA rated Engine Family with installation on existing Geneset for Fabrication of all work, removing of old silencer and commissioning of New RECD Device on Genset etc. and compliance with commission for Air ducting Management (Direction No.76) with CPCB regulation type complete in all respect up to entire satisfaction of Engineer-in-charge of the work. Make: - M/s Platino Automotive Pvt. Ltd. / M/s Chakr Innovation Pvt. Ltd. / M/s Vasthi Instruments Pvt. Ltd.
Supply and Erection of mild steel bucket stand suitable for 6 Nos. fire buckets, with 6 nos bucket including the cost of welding and painting of complete stand will one coat of red oxide and 2 coats of approved paint of red colour with all labour and material required to complete the job in all respect up to the entire Satisfaction Engineer-incharge of the work (size 6x4 made of GI pipe 32mm dia).
Janta Electric Store (BID ID -1364470)
S.S. Enterprises (BID ID -1365324)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.13 MB
BOQ_559405.xls
BOQ • 0.28 MB
AD0137639.pdf
Additional Documents • 2.59 MB
OT0137639.pdf
Other Document • 0.96 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .