CONTRACT FOR ELECTRICAL WORKS FOR TRANSIT ACCOMODATION FOR KASHMIRI MIGRANTS BWO INSTALLATION OF STREET LIGHTING ON 8 MTR LONG GI OCTOGONAL POLES AT ODINA BANDIPORA UNDER UT CAPEX BUDGET 2022 23

Amount

Supply, laying, testing and Commissioning of 8.0 mtr Long GI (70 micron DFT single dip) octogonal poles uniformally tappered with thickness of 3mm with bottom/top Dia of 155 mm /70mm & base plate of 260x260x16mm/pcd 250 mm provided with proper door opening for connections on the bottom side with G.I. Foundation Bolts (J Type) M20x700 mm long (Set of 4 no.’s per pole) conforming to relevant IS as per the annexed specifications.

Supply and Laying of RCC foundation for 8.0 mtr. Long Octagonal poles including proper curing. 0.585mX0.585mX1.0m (RCC with concrete ratio 1:1.5:3 with minimum 8 Nos. of 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm C.C for fixing the pole).(Design specifications of foundation as provided by pole manufacturer need to approved by the deptt.)

Supply and laying of Earthing of Octagonal Pole Complete by GI Pipe 40 mm or GI Rod 20mm 3 mtr long through GI Strip (25x3)mm

Supply, installation, testing and commissioning of Pre fabricated galvanized single way top bracket (1000mm long with 48.3 OD GI Pipe) with tilt angle of 15 Deg. to be fitted on top of Octogonal pole for holding lumanaries

Supply, installation, testing and commissioning of Pre fabricated galvanized two way top bracket (1000mm long each with 48.3 OD GI Pipe) with tilt angle of 15 Deg. to be fitted on top of Octogonal pole for holding of lumanaries

Supply, installation, testing and commissioning of DK thermoplastic cable Junction/ Termination T boxes 8"x10"of class IP55/IP65 fitted with two 2-5 Amp MCB strip,4-way terminal block / connectors Incl. copper lugs, Clamps ,nut & bolts washers etc (Standard make).inside the door openining provided at the bottom of pole.

Supply, Installation, testing and commissioning of 120 Watt LED Luminaries of IP 67 protection with following specification 1. Input voltage : 100 V to 300 V 2.Lumens : Min 13800 3. Power factor : >0.90 4. Life expecting : more than 50,000 hours 5. No of hours usage / day : 10 to 12 hours/day 6. Rated watt : 120W 7. Luminous Efficiency :greater than 110 Lm/watt % 8. Colour Temperature : 6000 to 6,500 K with test certificate 9. Ingress protection : IP 67 as per IS/IEC60529-2001 with test certificate. 10. Total harmonic distortion (THD): <10% with test certificate 11. Colour rendering index : Ra > 85 12. Working Temperature : -10 deg to 50 deg 13. LED thermal management : LED shall be mounted on heat sink conductive aluminum 14. Driver board: Details shall be given for getting spare. 15. Luminary Casing : Pressure die cast Aluminum with toughened glass cover and water proof fixture. 16. Inbuilt 4 kV surge Protection

Supply,Laying, testing and commissioning of 3X1.5 mm 2 PVC insulated multistrand flexible copper wire for service connections from connection plate to the LED luminary individual circuit including loop & earthings laid properly.

Supply and laying of HDPE pipe 50 mm O/D and inner Dia 38 mm including trench excavation in hard soil (0.3x0.45x1950m) for laying of 16 sq mm Almunium armoured cable . The job further inludes refilling back the same and removal of surplus excavated material to an appropriate place.

Supply,Laying, testing and commissioning of LT 16 mm2 4 core Aluminium XLPE Armoured cable to be carried through conduit/pipe U/G or A/G only in case of site constrains excluding cost of pipe & trench excavation. The cable shall include end termination lugs with its crimping /taping conforming to IS 7098 Part 1 annexed in the tender documents

Supply,Laying, testing and commissioning of LT 16 mm2 2 core Aluminium XLPE Armoured cable to be carried through conduit/pipe U/G or A/G only in case of site constrains excluding cost of pipe & trench excavation. The cable shall include end termination lugs with its crimping /taping conforming to IS 7098 Part 1 annexed in the tender documents

Supply, installation, testing and commissioning of Dust/rain/snow-proof canopy type mini-outdoor LT feeder panel of size 450X300mm with front door opening duly powdered colour coated with inbuilt 2No TPN 16-32 Amp MCCB,TPN busbars of same capacity installed on cement concrete block with 4 angle iron legs grouted in the cement concrete of termination of main 25sqmm cable and outgoing 16 sqmm cable circuits.

M/S BARKAT ELECTRICALS

Powermech Engineering Services

M/S BHAT POWER PVT. LTD.

BLUEWAVE ENGINEERS & CONTRACTORS