DP MCB of 63 A capacity suitable for DC DP MCB of 63 A capacity suitable for DC voltage up to 220V DC as per IS 9928:1996, number of Pole 2P, Rated Current-63 A, Curve C Rated Voltage-220V DC, Rated short circuit breaking capacity-6000 A connecting Terminal Screw terminal.

Special Eligibility Criteria

1. 1

   Participation by Manufacturers is preferred. Agents/Dealers participating in a tender on behalf of manufacturers must provide Tender Specific Authorization (TSA) issued by the OEM. Bidders must upload above authorization letter along with their offer failing which their offer will not be considered as an offer from that manufacturer and the make. i) In a tender, either the authorized agent/dealer on behalf of the Principal/OEM or the Principal/OEM itself can bid, but both cannot bid simultaneously for the same item in the same tender. Further, against a particular tender, one Principal/OEM should not issue Tender Specific Authorization to more than one agent/ dealer. Such offers with different terms against a particular product, if treated as ambiguous offers, the bidder(s) or their Principal/OEM will have no right to lodge any claim. ii) If an authorized agent/dealer submits bid on behalf of the Principal/OEM, the same agent/dealer shall not submit a bid on behalf of another Principal/OEM in same tender for the same item/product

   Document requiredConfirmation required
2. 2

   Makes-Legrand, Siemens, Schneider, Indoasian, Havells Only Accepted

   Document requiredConfirmation required
3. 3

   The order of precedence of the tender documents shall be as follows: (1) Notice Inviting Tender (NIT), (2) Special Conditions of Contract, (3) Central Railway Bid Document, and (4) IRS Conditions of Contract. In the event of any inconsistency, ambiguity, or conflict between the provisions of these documents, the provisions contained in the document having the higher order of precedence (i.e., the lower serial number) shall prevail. For example, if there is any conflict between the provisions of the NIT and the IRS Conditions of Contract, the provisions of the NIT shall prevail, as it ranks higher in the order of precedence.

   Document optionalConfirmation required

Check List

1. 1

   This is an e-tender. Manual Offers/Bids for this tender will not be accepted under any circumstances, only electronic Offers/Bids shall be accepted.
2. 2

   Have you furnished the statement of deviations, if any?
3. 3

   Have you mentioned MAKE/BRAND of OEM
4. 4

   Have you indicated the HSN code of your offered product
5. 5

   Have you kept your offer validity as per "Condition for Responsiveness of Offer"
6. 6

   Have you attached relevant document for MSE if you claimed benefits and preferential treatment as MSE firm

Commercial-Compliance

1. 1

   Goods & Services Tax (GST): As per Clause 9.0 and all sub clauses of CENTRAL RAILWAY BID DOCUMENT (Updated) JANUARY-2024. All tenderers to quote correct HSN code and corresponding GST rate for the item/items quoted. Misclassification in HSN code, if quoted by any bidder, shall be dealt as per Clause 9.0(iv) of Section II of CENTRAL RAILWAY BID DOCUMENT (Updated) JANUARY-2024

   Document optionalConfirmation required
2. 2

   In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/ SGST Act, the Railway shall deduct the applicable GST from his/their bills under Reverse Charge Mechanism [RCM] and deposit the same to the concerned tax authority.

   Document optionalConfirmation required
3. 3

   The Bidder agrees to supply the tendered stores at the rates quoted by him in accordance with the Standard Governing Conditions of this tender

   Document optionalConfirmation required
4. 4

   The bidder confirms that Rates and other financial terms quoted in relevant columns of financial bid will only be ruling terms for acceptance, and such terms quoted anywhere else should be ignored. [Denial of this condition is not recommended]

   Document optionalConfirmation required
5. 5

   Bidders shall also give Declaration as below:- I/We agree to pass on such additional input tax credit as may become available in future under GST scheme, in respect of all the inputs used in the manufacturing and/or supply of final goods/services on the date of supply by way of reduction in price and advise the purchaser accordingly

   Document optionalConfirmation required
6. 6

   All bidders shall confirm declaration as below in terms of Clause 5.15 of Section II of CENTRAL RAILWAY BID DOCUMENT (Updated) JANUARY-2024 in compliance of restrictions under Rule 144(xi) of GFR- 2017:- a) I have read the clause regarding restrictions on procurement from a bidder of country which shares a land border with India. b) I certify that this bidder is not from such a country or, if from such a country, has-been registered with the competent authority. c) I hereby certify that this bidder fulfils all requirements in this regard and is eligible to be considered. (Where applicable, evidence of valid registration by the competent authority is attached). If the bidder fails to give such declaration, as above, then it will be presumed that the contents of above declaration have been read and unconditionally agreed and accepted by the tenderer. If any tenderer is not agreeable to this declaration they have to categorically mention about the disagreement in Techno-Commercial Deviation.

   Document optionalConfirmation required
7. 7

   Bidders to submit details of location(s) where local value addition is made. In case no details are furnished, it will be presumed that works address(es) of manufacturing in India are the location(s) of local value addition.

   Document optionalConfirmation required
8. 8

   Note to Bidders: Bidders are advised to carefully review the contents of the Undertaking/declaration prior to signing, as the submission of false information could lead to rejection of the bid.

   Document optionalConfirmation required
9. 9

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

1. 1

   Validity of offer: Validity of offer should be 90 days. Offers quoted with lesser validity shall be deemed as commercially unresponsive and shall be summarily rejected.