Reconfiguration of Integrated Terminal Building and Renovation of Old Terminal Building at D.A.B.H. Airport Indore. SH SITC of Non Inline Baggage Handling System at OTB of DABH Airport Indore.

Amount

SH:I SITC OF PASSENGER BAGGAGE HANDLING SYSTEM

Design, supply, installation, testing and commissioning of heavy duty endless, race track type horizontal flexible overlapping slat type, flat arrival baggage carousel, having 950 mm long (min), 300 mm wide and 5 mm (min) thickness and black in colour with smooth top. The material of slat shall be of PVC/ABS /PU/Rubber of high quality. The black colour slat shall be flexible, antistatic and flame retardant. The slat carrier support shall be minimum 3.0 mm thick fabricated from MS sheet duly painted/ powder coated having capacity normal live load rating of 35 Kg. (approx.) per linear meter. The height of conveyor system shall be 450mm from finished floor level and speed of 24-30 mtr./min. The carousel shall have curve radius, chain block, friction type suitable capacity drive unit, finished chain, frame work, supports, chain track, Take up section, side covering (inner & outer), Trim / Fascia, toe kick plate (inner & outer) in the passenger area as well as in the non-passenger area, Infill materials and all other accessories as per technical specifications for baggage handling system including cutting & drilling of holes, equipment Grouting, Earthing, necessary capacity cabling for drive from control panel, connection and interconnection, etc. as required for successful commissioning of baggage conveyor system in the baggage break up area. ( a) (42+42) Mtrs.

Integrated Weighing Scale Conveyor: Design, supply, installation, testing & commissioning of following size heavy duty slider bed belt weighing scale conveyor equipped with illuminated push button for introduction of baggage into dispatch conveyor (after baggage had been weighed & tagged) complete with LCD dual display type weighing scale with 4 nos. high resolutions load cells each of suitable capacity, Accuracy class C3 to C6 with 2 ply, 3mm minimum thickness polyster black colour carcass PVC smooth / rough top, flame retardant, antistatic, robust, flexible, capable of providing continuous service, and of very low friction type belt having useful width 650mm (minimum) and overall frame size 800mm (maximum), height as per system design of OEM and functional requirment at passenger end and the other end suitably sloped for easy flow of baggage with speed as per system design of OEM and functional requirment. The bed shall be made of 3 mm thick (minimum) galvanized or epoxy coated mild steel sheet, weighing scale, drive pulley, Tension adjustment, frame and supports, Trim / fascia covering / finishing, head and tail pulley, return / snub rollers, side wall / Guard with control logic and protection as per technical specifications for baggage handling system including all Electrical switchgears component, cabling, connection / interconnection, Controls, cutting & drilling of holes, equipment Grouting, Earthing, etc., complete as required for successful continuous operation of the system. (a) Length - 1200 mm (Minimum)

Dispatch Conveyor: Design, supply, installation, testing & commissioning of following size heavy duty slider bed belt dispatch conveyor complete with 2 ply, 3mm minimum thickness polyster black colour carcass PVC smooth top, flame retardant, antistatic, robust, flexible, capable of providing continuous service, and of very low friction type belt (Diamond cut Belt of 7.5 mm thickness ia also acceptable), normal live load 35 kg per linear meter having useful belt width such that it fits within the frame, without much side play and shall match with that of integrated weighing conveyor and overall frame size matching with integrated weighing conveyor, height as per system design of OEM and functional requirment suitably sloped for easy transfer of baggage from one section to adjoining section with speed as per system design of OEM and functional requirment. The bed shall be made of 3 mm thick (minimum) galvanized or epoxy coated mild steel, drive pulley, tension adjustment, frame and supports, Trim / fascia covering / finishing, head and tail pulley, return rollers, side wall / Guard, Vertical baggage guide / tipping device with control logic as per technical specifications for baggage handling system including all electrical switchgears component, cabling, connection / interconnection, Controls, cutting & drilling of holes, equipment Grouting, Earthing, etc., complete as required for successful continuous operation of the system. (a) Length – 1200 mm (Minimum)

Collector / Take away Conveyor: Design, supply installation, testing and commissioning of heavy duty slider bed belt type Collector / Take away Conveyor system having useful belt width of 950mm and frame size 1050 mm and height 400 mm from finished floor level, Normal live load 35 Kg. per linear mtr, speed of 21-25 mtr. per min. / as per system functional requirment complete with 2 ply, 3mm minimum thickness polyster black colour carcass PVC smooth top, flame retardant, antistatic, robust, flexible, capable of providing continuous service, and of very low friction type belt. The bed shall be made of 3 mm thick (minimum) galvanized or epoxy coated mild steel sheet, drive unit, tension adjustment, frame and supports and cross members, support spacing, Trim / fascia covering / finishing, drive pulley, head and tail pulley, take up pulley and snub rollers, return rollers, vertical baggage guide / tipping device side wall / Guard with control logic and protection as per technical specifications for baggage handling system including provision of all electrical switchgears component, cabling, connection / interconnection, Controls, cutting & drilling of holes, equipment Grouting, Earthing, etc., complete as required for successful continuous operation of the system for the Departure check-in area. ( a) (25+18.5) Mtrs.

Gravity Rollers: Supply and installation of Gravity Rollers of suitable section length as site requirement, having roller length 950mm (approx.), roller capacity 35 Kg per linear meter, 60/50mm pitch / dia or as per manufactuer's recommendation, width section 1000mm and height suitably matched and sloped, complete in all respects i/c conveyor frame section, rollers, supports as per technical specifications for baggage handling system including cutting & drilling of holes, equipment grouting, etc. as required.

Rolling Shutter: Supply, installation, testing and commissioning of electrically operated Rolling Shutter fabricated from MS of deep convex corrugations with side channel guides plate brackets. All MS shall be suitably painted / epoxy coated matching with side wall /frame colour and as approved by Engineer-In-charge. Rolling Shutter of nominal suitable size 1.5 mtr. (L) x 1.4 mtr. (W) are required to be provided wherever the conveyors are entering the space within the terminal building. The rolling shutters shall be provided with suitable rated geared motor directly coupled to the shaft of the shutter. Up & down movement of the rolling shutter shall be controlled by either limit switch or sensor. Interlocking with conveyor motor starter so that the conveyor would start only when the shutter is in full open condition. Down movement of the shutter could be done only with OFF switch of Conveyor System including mannual operation and mannual locking as specified in the specifications with wiring, earth connections, as required for the successful operation of the shutter and conveyor, cutting & drilling of holes, equipment fixing, etc. as required.

Drought Curtain (Flaps): Supply, installation, testing and commissioning of min. 2 mm thick PVC flaps with reinforcement and overlapping inside Drought Curtain of nominal size 1.5mtr.(L) x 1.4 mtr. (W)/ suitable for the opening to be fixed with SS strip, as per site requirement including cutting & drilling of holes, etc. as required.

SH:II Annual Operation & All Inclusive Comprehensive Maintenance Contract

Operation of the Departure & Arrival Baggage Handling System with Electrical Control Panels as provided in this scope including all Electrical / mechanical, safety, control as per special conditions, technical specifications after the commissioning & handing over of the system.

Operation Charges for 1st Year

Operation Charges for 2nd Year

Operation Charges for 3rd Year

Operation Charges for 4th Year

Operation Charges for 5th Year

Operation Charges for 6th Year

Operation Charges for 7th Year

Operation Charges for 8th Year

Operation Charges for 9th Year

Operation Charges for 10th Year

Operation Charges for 11th Year

Operation Charges for 12th Year

Operation Charges for 13th Year

Operation Charges for 14th Year

Operation Charges for 15th Year

All inclusive comprehensive maintenance contract (AICMC) of Complete Baggage Handling System ( Departure conveyor system -01 no and Arrival Conveyor System-02 nos.) including all electrical / mechanical Equipments, safety control, rolling shutters, gravity rollers, flaps installed under this contract as per special condition of contract and technical specification immediately after the commissioning & handing over of the system. (AICMC during DLP is covered in the SITC of conveyors installed in this scope. Bidder shall quote accordingly). AICMC will start after completion of DLP of 2 years.

AICMC Charges for 1st Year

AICMC Charges for 2nd Year

AICMC Charges for 3rd Year

AICMC Charges for 4th Year

AICMC Charges for 5th Year

AICMC Charges for 6th Year

AICMC Charges for 7th Year

AICMC Chargesfor 8th Year

AICMC Charges for 9th Year

AICMC Charges for 10th Year

AICMC Charges for 11th Year

AICMC Charges for 12th Year

AICMC Charges for 13th Year

Bidder Name

Amount in Words

DElite System Engineering (India) Pvt. Ltd.

PREMIER ENGINEERING TECHNICS PVT. LTD.

GANNON DUNKERLEY AND CO LTD

Three D Integrated Solutions Ltd

Fox Solutions Private Limited

DElite System Engineering (India) Pvt. Ltd.

GANNON DUNKERLEY AND CO LTD

Fox Solutions Private Limited

PREMIER ENGINEERING TECHNICS PVT. LTD.