08(e)/JGP-I/25-26 /SL 01

Labour for boring Tube well of required diameter with or without top enlargement up to the required depth as per direction of E.I.C by water jet system through any type of soil strata including hire & labour charges for boring of pipes scaffolding other tools & plants as necessary and taking out them including lowering pipes, strainer, blind pipe etc. and fitted and fixed same complete including bucket washing and other incidental works in this connection. (a) For depth up to 150 m. for 40 mm dia Tube well with top enlargement of 80 mm dia i) 40 mm dia

ii) 80 mm dia

Washing and development tube well with air compressor pump & engine for 8 (eight) hour conditions pumping per day as necessary arrangement for yield in gallons per hour with V notch including hire & labour & fuel charges for all tools & Plants & scaffolding as required complete in all respects according to the direction of the .E.I.C.

Packing the annular space between the outside of the tube well pipes & strainers and the bore with pia size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-in-charge including cost of all materials labour and equipment complete.

Construction of cement concrete (4:2:1) base cube 600 mm cube using jhama chips 20 mm down thick cement plaster (4:1) all sides & top including neat cement finishing, shuttering, curing complete.

Supply, fitting and fixing PVC pipes for underground work of approved make of (medium duty) conforming to ASTMD-1785 & threaded to match with G.I-pipes as per IS:1239 (Part 1) with all necessary accessories............. (a) Carriage up to work site (each socket fitted) (a) 40 mm dia.

(b) 80 mm dia.

Supplying fitting and fixing of P.V.C reducing socket with ISI mark. (a)80 mm x 40 mm

Supplying fitting and fixing high density polythine strainer of approved make with adapter confirming to I.S specification. (a) 40 mm dia.

Supplying, fitting and fixing steel cutter piece up to 450 mm long with sockets. (a) 40 mm dia.

Supplying, fitting and fixing 40 mm dia, PVC socket. (a) 40 mm dia. PVC socket

Supplying, fitting and fixing 80 mm dia, PVC socket. (a) 80 mm dia. PVC socket

Supply, fitting and fixing PVC pipes for under ground work of approved make of conforming to ASTMD -1785 & threaded to match with G.I. pipes as .... With all necessary for delivery from housing pipemake including necessary sockets column pipe (a) 40 mm dia.

Supplying, fitting & fixing G.I pipes of 'TATA' make with all necessary accessories, specials viz.socket, bend, tee, union cross, elbo, nipple, long screw, reducing socket, reducing tee, short piece etc. fitted with holder bats, clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fitting as required joining materials and two coats of painting with approved paint in any position above ground. level & in under ground.(Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accessorie, specials.) (i) 20 mm dia. (M)

(ii) 25mm dia. (M)

Supplying, fitting & fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq.cm. (i) 20 mm dia.

(ii) 25 mm dia.

(iii) 40 mm dia.

Supplying, fitting & fixing alloy iron with brass spindle bib cock / stop cock of approved brand and make, spray painted and tested to 21 kg per sq.cm. (i)15 mm dia.

Supply, fitting and fixing at site of submersible pumping machinery capable of discharging clear of water 5000 litre per hour against total head of 49 M. complete with single phase (220 V ), 50 Hz. A.C. Motor (mark KSB/TEXMO/CROMPTON) along with 3 mt. Submersible Cable.(H.Q curve of pump should be produced at the time of delivery)

Supply, fitting & fixing of 3 core 2.5 mm 2 Flat Copper Submersible Cable ( mark FINOLEX/HAVELL's)

(a) Supply and delivery of M.S. Rest clamp complete. Nut & Bolts of 10 mm thick for 40 mm dia. Pipe

(b)40 mm dia. G.I. Bend x 90°/M

Supply & delivery of 32 Amp. SPN Main Switch (HAVELL's)

Supply and delivery of control panel made of 16 SWG M.S. sheet phosphate powder Dust & Vermin proof consist of following (internal wing complete) (i) 40 mm dia. (M) (a)32 Amp. DPMCB(HAVELL's Standard).........1 No. (b)Contractor (20A/22A) (SIMENS)...........1 No. (c)Overload Relay (suitable Range Considering Motor current of SIMENS mark)...............1 No. (d)Start & Stop Push button(Red & Green)......1 No. (e)Start Capacitor. ....................1 No. (f)Running Capacitor....................1 No. (g)Voltmeter-100 Sq.mm. dia. (0-300 V) make Al..1 No. (h)Ammeter-100 sq.mm. dia.(0-30 A) Make AE....1 No. (i)HRC fuse 30A/32A approved make inter connecting wire of suitable gauge(HAVELL's)..........1 No.

Supply and delivery of G.M. Non return valve of 40 mm dia. Of ISI mark.

Installation of the pumping machinery along with 40 mm dia. 25 mtr. G.I. column pipe, G.I. bend, NRV, Pressure Gauge. Tube well cap including electrical connection complete by making Derrick arrangement as per direction of E.I.C.

Installation of main switch & control panel including making electrical connection complete by supplying all requisite materials as per direction of E.I.C.

Earth work in excavation of foundation trenches or drains. in all sorts of soil (including mixed soil but excluding laterite or sand stone ) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom, bailing out water as required complete. Footing

Earth work in foundation or plinth by silver sand in layers not exceeding 140 mm. as directed and consolidatating same by through saturation with water ramming complete, including the cost of supply of sand. (Payment to be made on measurement of finished quantity) (a)Fine sand

Earth work in filling in foundation trenches or plinth with good earth. in layer not exceeding 140 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on basis of finished quantity of work). With earth obtained from excavation of foundation.

Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand.

Cement concrete with graded stone ballast (40mm size) excluding shuttering in ground floor. (a) 6:3:1 proportion.

Hire and labour charges for shuttering with centering and necessary staging up to 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slab, beam, column, lintels curved or straight including, fitting, fixing and striking out after completion of works(up to ground floor) (A)25mm to 30 mm thick wooden shuttering as per decision & direction of E.I.C.

Ordinary cement concrete (mix 3:1.5:1) with graded stone chips (20mm down) excluding shuttering and reinforcement, if any in ground floor as per IS 456-2000. (a) Pakur/Chandil Variety

Reinforcement for reinforced concrete work in the all sorts of stuctures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking, and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a)For works in foundation, basement and up to roof of ground floor/up to 4 m. (i) Tor steel/Mild steel.

Artificial stone in floor, dado, staircase etc. with cement concrete (4:2:1) with stone chips, laid in panels as directed with toping made with ordinary or white cement (as necessary) and marble dust in proportion (2:1) including smooth finishing and rounding off corners and including application of cement slurry before flooring works, using cement @ 1.75 kg./Sqm. all complete including all materials and labour. (a) In ground floor. (ii) 25 mm. thick

Plaster (to wall, floor, ceiling etc) with sand and cement mortar including off or champharing corners as directed and racking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor) (i) With 4:1 cement mortar (a) 20 mm thick plaster.

(b) 10 mm thick plaster.

Neat cement punning about 1.5 mm thick in wall, dado, window sills, floor, drain etc.

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (b) Area of each tile above 0.09 Sq.m (i) Colour decorative except white.

125mm thick brick work with 1st class brick in cement morter (1:4) including curing etc. completed as direction in ground floor.

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plaster or concrete surface)as per manufacture's specification. In ground floor.

Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three 1) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx)

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black). --- Multilayer. [Page-37, Item<6>]

Construction of circular soak well 2.5m deep in all types of sandy soils with dry brick work upto 1.6m from bottom having 150mm intermediate cement brick work (6:1) band all round and cement brick work (6:1) upto 0.9m from top with 19mm cement plastering (4:1) to inside face upto the depth of cement brickwork, 12mm thick cement plaster (1:4) pn outer face from top to the well upto G.L. and 6mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00m of inside of the well with brick metal [Page-89, Item<4>] [SOR - S & P]

M.S. Vertical iron treatment plant of dia 1.00 ft. x height 5.00 ft. with charge media and fine grave with all pipe fitting fixing and 5.00 no. value used ...as per direction [Market price]

Oxidization chamber dia 1.00 ft. x height 1.5 ft. with MNO2 Media used and fitting & fixed all complete as per direction. [Market price]

Chlorine chamber 8.00 galone with fitting & fixing all complete as per direction [Market price]

SIGN BOARD & PHOTOGRAPH (THREE PHASE) AS PER DIRECTION OF E-I-C WITH WATER CESTING & MATERIAL TESTING REPORT

Add: CGST @_______ 9%

Add: SGST @_______ 9%

Add: Labour Cess @ 1%

Add contingency upto @ 3 %