REPAIR AND PAINTING TO STEEL FURNITURE UNDER BSO NORTH OF GE NORTH MEERUT CANTT

Amount

ALMIRAH LARGE STEEL :- FD - 1031 CP Handle : Removing of old unserviceable handles from Almirah large steel and S&F new CP steel handle of exisiting size to Almirah large steel all as shown on drawing complete all as specified and directed

Lock : Removing of old unserviceable lock from Almirah large steel and S&F new lock of approved make, 06 lever with two keys to Almirah large steel all as shown on drawing complete all as specified and directed

Locking Device : M&L for locking device and lock bar as required and directed by Engr-in-Charge to Almirah large steel including making adjustment of door shutter & applying one coat of synthetic enamel paint over a coat of red-oxide primer after preparation of surfaces complete with spray machine all as shown on drawing complete all as specified and directed

Legs : Removing of old unserviceable leg from Almirah large steel and S&F new leg made out of 1mm thick MS black sheet (PBI) of existing size, shape and welding at appropriate points complete all as specified and directed

All as per Srl item No 04 here-in-before but bottom sheet of Almirah large steel.

All as per Srl item No 04 here-in-before but shelf of Almirah large steel.

Removing of old unserviceable butt hinges of Almirah large steel and S&F MS butt hinges 75 mm long and adjusting door by revitting / welding complete all as shown on drawing complete all as specified and directed

M&L for refixing of loose shelves with mild steel revitting /spot welding complete all as specified and directed

S & F of hard rubber sheet 10 mm thick of appropriate size at bottom of almirah complete all as specified and directed

ALMIRAH MEDIUM STEEL :- FD - 1032 CP Handle : Removing of old unserviceable handles from Almirah medium steel and S&F new CP stainless steel handle of exisiting size to Almirah medium steel all as shown on drawing complete all as specified and directed

Lock : Removing of old unserviceable lock from Almirah medium steel and S&F new lock 06 lever with two keys all as shown on drawing complete all as specified and directed

Locking Device : M&L for locking device and lock bar as required and as directed by Engr-in-Charge to Almirah med steel including making adjustment of door shutter & applying one coat of synthetic enamel paint over a coat of red-oxide primer after preparation of surfaces complete with spray machine all as shown on drawing complete all as specified and directed

Legs : Removing of old unserviceable leg from Almirah med steel and S&F new leg made out of 1mm thick MS black sheet (PBI) of existing size, shape and welding at appropriate points complete all as specified and directed

All as per Srl item No 13 here-in-before but bottom sheet of Almirah medium steel.

All as per Srl item No 13 here-in-before but shelf of Almirah medium steel.

Removing of old unserviceable butt hinges of Almirah medium steel and S&F MS butt hinges 75 mm long and adjusting door by revitting / welding complete all as shown on drawing complete all as specified and directed

M&L for refixing of loose shelves with mild steel revitting /spot welding complete all as specified and directed

S & F of hard rubber sheet 10 mm thick of appropriate size at bottom of almirah complete all as specified and directed

ALMIRAH LARGE STEEL 1/2 H, 1/2S :- FD - E6/MAP/18 CP Handle : Removing of old unserviceable handles from Almirah large steel 1/2S, 1/2H and S&F new CP steel handle of exisiting size to Almirah medium steel all as shown on drawing complete all as specified and directed

Lock : Removing of old unserviceable lock from Almirah large steel 1/2S, 1/2H and S&F new lock of approved make, 06 lever with two keys to Almirah medium steel all as shown on drawing complete all as specified and directed

Locking Device : M&L for locking device and lock bar as required and as directed by Engr-in-Charge to Almirah large steel 1/2S, 1/2H including making adjustment of door shutter & applying one coat of synthetic enamel paint over a coat of red-oxide primer after preparation of surfaces complete with spray machine all as shown on drawing complete all as specified and directed

Legs : Removing of old unserviceable leg from Almirah large steel 1/2S, 1/2H and S&F new leg made out of 1mm thick MS black sheet (PBI) of existing size, shape and welding at appropriate points complete all as specified and directed

All as per Srl item No 22 here-in-before but bottom sheet of Almirah large steel 1/2H,1/2S.

All as per Srl item No 22 here-in-before but shelf of Almirah large steel 1/2H,1/2S.

Removing of old unserviceable butt hinges of Almirah large steel 1/2H,1/2S and S&F MS butt hinges 75 mm long and adjusting door by revitting / welding complete all as shown on drawing complete all as specified and directed

Replacement of unserviceable conduit pipe with new CP steel conduit pipe of size 20mm dia having wall thickness 1.25mm to Almirah large steel 1/2H,1/2S complete all as specified and directed

Replacement of unserviceable socket with new Stainless steel socket/brackets suitable for 20mm dia conduit pipes to Almirah large steel 1/2H,1/2S complete all as specified and directed

M&L for refixing of loose shelves with mild steel revitting/spot welding complete all as specified and directed

S & F of hard rubber sheet 10 mm thick of appropriate size at bottom of almirah complete all as specified and directed

BED HARD STEEL :- FD - E6/MAP/08(R) Removing of old and unserviceable Plytop from Bed Hard and S&F of new 12mm thick plytop of siutable size, ISI marked, BWR phenol bonded plywood of unpolished edging of approved quality all as shown on drawing and as directed. (Make of Plywood : Greenply/ Century/ Duro) complete all as specified and directed

Removing of old unserviceable head board from Bed Hard and S&F new head board made of 18 mm thick prelaminated particle board both side teak faced having 04 mm thick teak wood beading all around. All as per size and design shown on drawing complete all as specified and directed

All as per Sr.item No 31 here-in-before but foot board of Bed hard.

S&F in replacement hard rubber shoes at each corner of long rail of Bed hard steel all as shown on drg complete all as specified and directed

S&F in replacement hard rubber shoes at the top of leg of of Bed hard steel all as shown on drg complete all as specified and directed

S&F in replacement hard rubber shoes at the bottom of leg of Bed hard steel all as shown on drg complete all as specified and directed

M&L for Welding to broken joints of bed hard complete all as specified and directed

CHAIR VERANDAH :- FD - 359 & 256 Cutting and removing of old cane from Chair verandah, preparation of surfaces by application of paint remover and grinding machine and applying two coats of synthetic enamel white paint after application of one coat of red oxide steel primer and re-canning with cane plastic 04 mm wide of approved quality in Godrej Pattern complete all as shown on drawing complete all as specified and directed

M&L for Welding to broken joints of Chair varandah complete all as specified and directed

S&F in replacement PVC shoes to Chair Verandah all as shown on drg complete all as specified and directed

CHAIR VERANDAH (MAP) :- FD - MAP-II/06, MAP-II/15 Cutting and removing of old / unsv PVC Sheet from Chair verandah, preparation of surfaces by application of paint remover and grinding machine and applying two coats of synthetic enamel white paint after application of one coat of red oxide steel primer and re-canning with cane plastic 04 mm wide of approved quality in Godrej Pattern complete all as shown on drawing complete all as specified and directed

M&L for Welding to broken joints of Chair varandah complete all as specified and directed

S&F in replacement PVC shoes to Chair Verandah all as shown on drg complete all as specified and directed

CHAIR COMPUTER :- FD - E/6/MAP/01 M&L for Replacement of old unserviceable seat and back of chair with new seat of 12mm thick plywood commercial quality (ISI marked) covered with 75mm thick U foam and tapestry cloth. The back shall be 6mm thick plywood commercial quality (ISI marked) fixed on frame with screwes and covered with 40mm thick U foam over shape and tapestry cloth.Fixing shall be all as per drawing and including all minor repairs and wedling etc. complete all as specified and as directed by Engineer-in-Charge. (Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE). complete all as specified and directed

M&L for Removing of old/unserviceable tapestry cloth from seat and back of existing Chair Computer and S&F new tapestry cloth to seat and back of Chair Computer complete all as specified and as directed by Engineer-in-Charge. (Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE). complete all as specified and directed

M&L for Replacement of unserviceable hydraulic system of Chair Executive for the adjustment of height all as directed by the Engineer-in-Charge complete all as specified and directed

M&L for Replacement of old, unserviceable/ broken wheel base of Chair Executive complete all as specified and directed

M&L for Removing old/unservicavle twin castor wheel from chair and S & F new twin wheel castors as per existing shape and size complete all as specified and directed

M&L for Replacement of old unserviceable / broken arm rest with new arm rest of black integral skin polyurethane reinforced with MS insert and shall be scratch and weather resistant of Chair briefing static base complete all as specified and directed

CHAIR WRITING :- FD - E6/MAP/12 M&L for Replacement of old unserviceable seat and back of chair with new seat of 12mm thick plywood commercial quality (ISI marked) covered with 75mm thick U foam andtapestry cloth. The back shall be 6mm thick plywood commercial quality (ISI marked) fixed to frame with screw and covered with 40mm thick U foam over shape and tapestry cloth. Seat and back fixed on frame with screw and including all minor repairs with welding to steel frame etc complete all as specified and as directed by Engineer-in-Charge. (Note :- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter and as per sample approved by GE.) complete all as specified and directed

M&L for Removing of old/ unserviceable tapestry cloth from seat and back of existing Chair Writing and S&F new tapestry cloth to seat and back of Chair Writing complete all as specified and as directed by Engineer-in-Charge. (Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE). complete all as specified and directed

M&L for Welding to broken joints of Chair writng complete all as specified and directed

S&F in replacement hard PVC shoes to Chair writng all as shown on drg. complete all as specified and directed

M&L for Replacement of old unserviceable / broken arm rest with new arm rest of black integral skin polyurethane reinforced with MS insert and shall be scratch and weather resistant of Chair briefing static base complete all as specified and directed

CHARPOY IP FOLDING WITH HARD TOP :- FD - 388(R) M&L for Removing of old unserviceable ply wood from charpoy IP folding and S&F new 08 mm thick BWR phenol bonded plywood with unpolished edging (ISI marked) of suitable size of approved quality in two pieces fixed with suitable screw steel on top complete all as specified and directed (Make of Plywood : Greenply/Century/Duro/Archid).

M&L for Welding to broken joints of charpoy IP folding complete all as specified and directed

S&F in replacement hard rubber/PVCshoes at the bottom of Charpoy IP folding all as shown on drg complete all as specified and directed

RACK SHOE STEEL :- FD - E6/MAP/02(R) M&L for Welding to broken joints of Rack Shoe steel complete all as specified and directed

S&F in replacement hard rubber/ PVC shoes at the bottom of Rack shoe steel all as shown on drg complete all as specified and directed

M&L for Removing of old/unserviceable Jali (Shelf) from existing Rack Shoes steel and S&F new Jali (Shelf) including applying two coat of synthetic enamel paint ( black in colour) complete all as shown on drawing complete all as specified and directed

TEAPOY VERANDAH :- FD - 255 M&L for Removing of old unserviceable top from Teapoy Verandah and supply and fixing of new top made out of 17/18 mm thick MDF board duly post-formed of colour / shade as approved by GE (Make- Ecoboard/ Action-Tesa/ Greenlam) complete all as specified and directed

M&L for Replacement of unserviceable flat iron frame with FI 25 x 5 mm thick of required size as per drg. The fixing and finishing shall be done in accordance with drawing specifications complete all as specified and directed

M&L for Welding to broken joints of Teapoy verandah complete all as specified and directed

M&L for S&F in replacement PVC shoes to Teapoy verandah complete all as shown on drg complete all as specified and directed

TEAPOY VERANDAH :- FD - E6/MAP/17 M&L for Removing of old unserviceable top from Teapoy Verandah and supply and fixing of new top made out of 17/18 mm thick MDF board duly post-formed of colour / shade as approved by GE.(Make- Ecoboard/ Action-Tesa/ Greenlam) complete all as specified and directed

M&L for Welding to broken joints of Teapoy verandah complete all as specified and directed

S&F in replacement PVC shoes to Teapoy verandah complete all as shown on drg complete all as specified and directed

M&L for Removing of old/unserviceable jali from existing Teapoy Verandah and S&F new Jali including two coat of synthetic enamel paint (black in colour) complete all as specified and directed

TABLE BED SIDE (OFFICERS) :- FD - E6/MAP/15(R) M&L for Replacement of Upper drawer made out of 17/18 mm thick MDF board, and provided with 6mm thick bottom plywood of BWR grade complete all as specified and directed

M&L for Replacement of Lower drawer made of 17/18 mm thick MDF board, and provided with 6mm thick bottom ply BWR grade & telescopic channel of best quality as approved by Engr-in-charge.

M&L for Removing of old unserviceable top from table bed side and supply and fixing the new top made out of 17/18 mm MDF board with teak faced with 04mm thick teak wood beading all as shown on drawing and as directed by Engineer-in-Charge. (Make:- Ecoboard/ Action-Tesa / Greenlam). complete all as specified and directed

All as per Srl item No 70 here-in-before but side of table bed side.

M&L for Removing of old unserviceable back ply of table bed side and supply and fixing the newback ply of same size made out of 06mm thick plywood all as shown on drawing and as directed by Engineer-in-Charge.

M&L for Removing of old/unserviceable handle from the table bed side and supply and fixing new CP steel handle 100mm long as per sample, shape and size all as per drawing and as directed by Engr-in-charge.

LOCKER BED SIDE STEEL :- FD - 257 M&L for Replacement of old unserviceable hasp and staple with new 100mm long MS chromium plated hasp and staple all as shown drg complete all as specified and directed

M&L for Replacement of old unserviceable bow handle with new 100mm long CP steel bow handle all as shown on drg complete all as specified and directed

M&L for Replacement of unserviceable conduit pipe with new CP steel conduit pipe of siutable size of 20mm dia having wall thickness 1.25mm to locker steel complete all as specified and directed

M&L for Replacement of unserviceable socket with new aluminium socket/brackets suitable for MS 20mm dia conduit pipes complete all as specified and directed

M&L for Removing of old unserviceable foot rest from locker bed side steel and supply and fixing new foot rest made out of 1mm thick MS black sheet (PBI) of existing size, shape and welding at appropriate points and applying one coat of synthetic enamel olive green paint with spray machine over a coat of primer after preparation of surfaces complete all as specified and directed

All as per item Sl No 78 above here-in -before but bottom sheet of locker bed side steel

M&L for Removing of old unserviceable MS hinges of locker bed side steel and S&F new MS hinges 65 mm long with gas welding / revitting complete all as shown on drawing complete all as specified and directed

M&L for refixing of loose shelves with mild steel revitting /spot welding complete all as specified and directed

S & F of hard rubber sheet 10 mm thick of appropriate size at bottom of locker steel complete all as specified and directed

CHAIR REVOLVING LOW BACK (STEEL) :- FD - TP M&L for Replacement of old unserviceable seat and back of chair with new seat of 12mm thick plywood commercial quality covered with 75mm thick U foam and the back shall be 6mm thick plywood commercial quality fixed on frame with screwes and covered with 40mm thick U foam over shape and tapestry cloth. Seat and back fixed on frame with screw and including all minor repairs and welding etc complete all as specified and as directed by Engineer-in-Charge. (Note :- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE.) complete all as specified and directed

M&L for Removing of old/unserviceable tapestry cloth from seat and back of existing Chair Revolving and S&F new tapestry cloth to seat and back of Chair Revolving complete all as specified and as directed by Engineer-in-Charge. (Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE) complete all as specified and directed

M&L for Replacement of unserviceable hydrulic system of Chair revolving for the adjustment of height all as directed by the Engineer-in-Charge

M&L for Replacement of old ,unserviceable / broken wheel base of Chair revolving all as directed by the Engineer-in-Charge.

M&L for Removing old/unservicavle twin castor wheel from chair and S & F new twin wheel castors as per shape and size complete all as specified and directed.

M&L for Replacement of old unserviceable / broken arm rest with new arm rest of black integral skin polyurethane reinforced with MS insert and shall be scratch and weather resistant of Chair briefing static base complete all as specified and directed

TABLE OFFICE OFFICER STEEL :- FD - 1003 M&L for Removing of old unserviceable top from Table Office Officer Steel and supply and fixing of new top made out of 17/18 mm thick MDF board duly post-formed of colour / shade as approved GE (Make:- Ecoboard/ Action-Tesa / Greenlam). complete all as specified and directed

M&L for Removing of old unserviceable lock from Table Office Officers steel and S&F new brass lock with two keys all as shown on drawing complete all as specified and directed (Make : Godrej/Harrison/Plaza).

M&L for Removing of old unserviceable drawer from Table Office Officers steel and supply and fixing the new drawer of same size and shape made out of 1mm thick MS black sheet all as shown on drawing and as directed by Engineer-in-Charge.

S & F in replacement 100mm long piece of 25 Sqmm MS tube having wall thickness of 1.6mm including welding to Table Office Officers complete all as directed by Engineer -in-Charge.

S&F in replacement PVC shoes to Table Office Officers steel complete all as shown on drg complete all as specified and directed

M&L for Welding to broken joints of Table office officer's steel with drawer complete all as specified and directed

TABLE OFFICE CLERK STEEL :- FD - 1004 M&L for Removing of old unserviceable top from Table Office Clk Steel and supply and fixing of new top made out of 17/18 mm thick MDF board duly post-formed of colour / shade as approved by GE complete all as specified and directed (Make : Action-tesa/Ecoboard/Greenlam)

M&L for Removing of old unserviceable lock from Table Office clerk steel and supply and fixing new lock with two keys all as shown on drawing complete all as specified and directed

M&L for Removing of old unserviceable drawer from Table Office clerk steel and supply and fixing the new drawer of same size and shape made out of 1mm thick MS black sheet all as shown on drawing. complete all as specified and directed

S & F in replacement 100mm long piece of 25 Sq mm MS tube having wall thickness of 1.6mm including welding to Table Office Clerk steel complete all as directed by Engineer -in-Charge.

S&F in replacement PVC shoes to Office clerk steel complete all as shown on drg complete all as specified and directed

M&L for Welding to broken joints of Table Office clerk steel with drawer complete all as specified and directed

TABLE DINING OR's STEEL (A/TOP) :- FD - 165(M) M&L for Removing of old unserviceable top from Table dining OR's steel and S&F the new top of same size made out of 18/19mm thick block board of approved quality duly covered with 0.6mm thick, 24 gauge aluminium sheet all as shown on drawing complete all as specified and directed (Make : Action-tesa/Ecoboard/Archidlam)

M&L for Welding to broken joints of Table dining OR's steel complete all as specified and directed

S&F in replacement PVC shoes to Table dining OR's steel complete all as shown on drg complete all as specified and directed

S & F in replacement 100mm long piece of 25 Sq mm MS tube having wall thickness of 1.6mm including welding to Table dining OR's steel complete all as directed by Engineer -in-Charge.

CHAIR SCHOOL WITH HAND BOARD :- FD - E6/MAP/05 M&L for Removing old/unservicable one piece PVC seat & back from chair school with hand board and S & F new one piece PVC seat and back of best quality as per shape and size shown in drawing complete all as specified and directed

M&L for Removing old/unservicable hand board top from chair school with hand board and S & F new top of 17/18mm thick MDF board of colour / shade as approved by GE with PVC edging and screw to 25 mm hollow steel pipe inserted in 20 mm as per shape and size shown in drawing complete all as specified and directed

M&L for Welding to broken joints of Chair school with hand board complete all as specified and directed

S&F in replacement PVC shoes to Chair school with hand board complete all as shown on drg complete all as specified and directed

CHARPOY WITH HARD TOP :- FD - MAP-II/01 M&L for Removing of old and unserviceable Plytop from Charpoy with hard top and S&F of new 12 mm thick plywood of suitable size, ISI marked, BWR phenol bonded plywood with unpolished edging of approved quality all as shown on drawing complete all as specified and directed (Make of Plywood : Century/ Green/ Duro/ Archidply).

M&L for Welding to broken joints of Charpoy with hard top complete all as specified and directed

S&F in replacement hard rubber shoes at the bottom of Charpoy with hard top all as shown complete all as specified and directed

TABLE 3'x 2' STEEL WITH DRAWER :- FD - 1008 M&L for Removing of old unserviceable top from Table 3'x2' steel with drawer and supply and fixing of new top made out of 17/18 mm thick MDF board duly post-formed of colour / shade as approved by GE (Make : Action-tesa/ Ecoboard/ Greenlam) complete all as specified and directed

M&L for Welding to broken joints of Table 3'X2' steel with drawer complete all as specified and directed

S&F in replacement PVC shoes to Table 3'X2' steel with drawer complete all as shown on drg complete all as specified and directed

S & F in replacement 100mm long piece of 25 Sq mm MS tube having wall thickness of 1.6mm including welding to Table 3'X2' steel with drawer complete all as directed by Engineer -in-Charge.

M&L for Removing of old unserviceable lock from Table 3'X2' steel with drawer and supply and fixing new lock with two keys all as shown on drawing complete all as specified and directed (Make : Godrej/Harrison/Plaza).

M&L for Removing of old unserviceable drawer from Table 3'X2' steel with drawer and supply and fixing the new drawer of same size and shape made out of 1mm thick MS black sheet all as shown on drawing and applying one coat of synthetic enamel paint of colour / shade as approved by GE with spray painting (Internally and externally) over a coat of primer after preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.

TABLE 3'x 2' STEEL WITHOUT DRAWER :- FD - 1007 M&L for Removing of old unserviceable top from Table 3'x2' steel with out drawer and supply and fixing of new top made out of 17/18 mm thick MDF board duly post-formed exterior grade of colour / shade as approved by GE (Make : Action-tesa/Ecoboard/Greenlam)

M&L for Welding to broken joints of Table 3'X2' steel without drawer complete all as specified and directed

S&F in replacement PVC shoes to Table 3'X2' steel without drawer complete all as shown on drg complete all as specified and directed

S & F in replacement 100mm long piece of 25 Sq mm MS tube having wall thickness of 1.6mm including welding to Table 3'X2' steel without drawer complete all as specified and directed by Engineer -in-Charge.

PAINTING :- M&L for removing existing paint by application of paint remover / grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint (hammer tone / dual tone) make/colour/ shade as approved by GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the following steel furniture items (internally & externally complete) :- Almirah large steel

Drg No :- (FD/E6/MAP/18) All as per Srl item No 122 here-in-before but Almirah large steel 1/2H,1/2S

Drg No :- (FD-1032) All as per Srl item No 122 here-in-before but Almirah medium steel

Drg No :- (FD/E6/ MAP/ 18(R)) All as per Srl item No 122 here-in-before but Bed hard steel (MAP)

Drg No :- (FD-388(R)) All as per Srl item No 122 here-in-before but Charpoy IP folding with hard top

Drg No :- (FD/MAP/II/01) All as per Srl item No 122 here-in-before but Charpoy IP Hard Top (MAP)

Drg No :- (FD/E6/MAP/12) All as per Srl item No 122 here-in-before but Chair Writing (MAP)

Drg No :- (FD/238) All as per Srl item No 122 here-in-before but Ladder for loft (steel)

Drg No :- (FD/E6/MAP/02(R) All as per Srl item No 122 here-in-before but Rack shoe steel

Drg No :- (FD-255) All as per Srl item No 122 here-in-before but Teapoy Verandah

Drg No :- (FD/E6/MAP/17) All as per Srl item No 122 here-in-before but Teapoy Verandah (MAP)

Drg No :- (FD/E6/MAP/05) All as per Srl item No 122 here-in-before but Chair School with Hand Board

Drg No :- (FD-1007 & 1008) All as per Srl item No 122 here-in-before but Tabel 3'x2' with/ without drawer steel

Drg No :- (FD/E6/MAP/15(R) All as per Srl item No 122 here-in-before but Table Bedside (Steel)

Drg No :- (FD-1003) All as per Srl item No 122 here-in-before but Table Office Officer's Steel

Drg No :- (FD-1004) All as per Srl item No 122 here-in-before but Table Office Clerk Steel

Drg No :- (FD-165(M) All as per Srl item No 122 here-in-before but Table Dining ORs

Drg No :- (FD-257) All as per Srl item No 122 here-in-before but Locker Bed Side Steel

Drg No :- (FD/E6/MAP/05) All as per Srl item No 122 here-in-before but Chair School with Hand Board

M/S NEHAL ENTERPRISES

RAM SAFE INDUSTRIES