Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.5 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹17.0 L+₹1.4 L (9.28%)Rejected-Finance CIVIL LINE MATATILA ROAD TALBEHAT DISTT LALITPUR U P | TALBEHAT | LALITPUR | U P | L2 | Rejected-Finance Not become lowest bidder |
Tender Value
₹23.9 L
EMD Value
₹47,740
Closing Date
4 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE JHANSI
HQ CWE JHANSI
PROVN OF WIDENING OF EXIT ROAD UNDER AGE B/R-I OF GE JHANSI
2023_MES_618862_3
CWE/JHA/J/TOKEN/59 OF 2023-24
Open Tender
Civil Works - Roads
Item Rate
180 days
JHANSI
As per tender documents
8 documents required · 8 mandatory
₹500
GE JHANSI
₹47,740
Yes
2 Nov 2024
3 Jul 2024
6 Sept 2024
3 Jul 2024
4 Sept 2024
11 Jul 2024
Amount
Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr deep for fdn etc in hard/dense soil and getting out complete all as specified and directed.
M & L for cement concrete 1:4:8 type D2 using 40 mm graded aggregate as in foundation and mass concreting complete all as specified and directed.
M/L for brick work with old size sub class 'B' bricks straight or curved on a plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.
M&L for 75mm HDPE Pipe as weep hole complete all as specified and directed.
Returning filling in including spreading, levelling ,watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.
Removing excavated material to a distance exceeding 50 meter upto 250mtr and deposited where directed at level not exceeding 1.5 m above the starting point complete all as specified and directed.
M&L for Cement concrete Type B-1 1:2:4 (20 mm graded aggregate) in Coping etc complete all as specified and directed.
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
Preparing newly plastered wall surfaces of wall and applying three coats of white wash complete all as specified and directed.
M&L for rolling and consolidating road formation in cutting only with power roller 8 to 12 tone including, filling in hollows and depression which occur during the process of rolling complete all as specified and directed.
M&L for 150mm thick ( spread thickness) soling with boulders or quarried stone 80mm to 40mm size intersticks filled, surface formed, rolled & consolidated with 8 to 12 tone power roller to required gradient & camber complete all as specified and directed.
M&L for 150mm thick (compacted thickness) water bound macadam complete laid in two separate layer each layer of 75mm compacted thickness with broken sand stone coarse aggregate of grading 2 ( 63 to 40mm size ) for 1st layer and of grading 3( 50 to 20 mm size) for second layer,( surfaces of each layer will be blinded with screening and moorum ,watered consolidated and compacted separately), spread rolled and consolidated to required gradient and camber using granite trap or basalt stone with 8 to 12 tone power roller complete all as specified and directed.
Preparing surfaces (unsurfaced water bound macadum) by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc & Applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sq metre complete all as specified and directed.
M&L for laying Bituminous premix asphaltic semi dense concrete 40mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient complete all as specified and directed.
M & L thermo plastic center or edge line, marking (reflective type) of 2.5 mm thickness of uniform finishing with machine conforming to BS 3262 (Part-I) 1989 read with most specification of 803 clause 4.2.1 and 4.2.2 on bituminious surface in white / yellow/ red colour and super imposed with glass slam beats conforming to BS 6088 and most specification 803 clause 4.3.3 including cleaning of surface by removing all dust dirt oil grease etc including removing of existing marking with spirit / kerosene / gas burner or mechanically on bituminious surface complete all as specified and directed.
M&L For sand Stone kerb of roughly squared stones of size 10 cm width x 30 cm deep, all surfaces hammer dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 20mm jointed in cement mortar 1:6 and struck flush complete all as specified and directed.
Excavation over areas, n exc 1.5 m deep and getting out in Hard/dense soil complete all as specified and directed.
M&L RCC Nominal Mix Cement concrete Type B1 1:2:4 using 20 mm graded aggregate in Foundations, including rafts, footings, foundation complete all as specified and directed.
M&L RCC Cement concrete Nominal Mix Type B1 1:2:4 using 20 mm graded aggregate in walls any thickness above top of footings complete all as specified and directed.
M&L RCC Cement concrete Nominal Mix Type B1 1:2:4 using 20 mm graded aggregate in beam, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
M&L for RCC nominal mix concrete Type B1 1:2:4 (using 20mm graded stone aggregate) as Slabs supported on wallsetc complete all as specified and directed.
M&L for RCC nominal mix concrete Type B1 1:2:4 (using 20mm graded stone aggregate) as in parapets, and railings exc. 60cm in height, newels, balustrade, and the like complete all as specified and directed.
M&L Use and removal of steel Formwork to sides of Rough finished surface of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished surface complete all as specified and directed.
M&L Use and removal of steel Formwork to face of Rough Finished surface of concrete walls , parapets and similar work etc.vertical or to batter for rough finished surface complete all as specified and directed.
M&L Use and removal of steel Formwork to face of Rough Finished surface of concrete soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for Preparing surfaces (black top old surface ) by brushing with wire brushes for removing dust etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc & Applying evenly a priming/tack coat with bituminous primer at 5 kg per 5 sq metre and over laying Bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient complete all as specified and directed.
S&F in repair for CAT Eyes (Road Stud), of size (90mm x 110mm x 17mm Approx) ,made of polycarbonate with electronically welded prismatic retro-reflective lens on both side for maximum retro-reflection in wet and dry conditions, non breakable, dustproof type, fixed with epoxy chemical, cement and hardner, complete all as specified and directed.
S&F of Solar road Stud of size 125x125x25 mm, made out of toughened aluminium alloy body with polycarbonate top cover, IP 65 protection against water ingress, having 03 No super bright LEDs on each side, coloured reflective LED cover, inbuilt rechargeable battery, solar panel, visibility up to 800 mtr, automatically turns on at night and turns off at dawn, flashing for min 3 days once fully charged, suitable for night & adverse weather condition and fixed with epoxy chemical, cement and hardener complete all as specified and directed.
HARNAM SINGH ANIL SINGH (BID ID -3063725)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .