Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.4 CrAccepted-AOC | ₹4.4 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹4.6 Cr+₹14.9 L (3.37%)Rejected-AOC NEAR GAURAV ICE FACTORY LOHARU ROAD CHARKHI DADRI 127306 | CHARKI DADRI | HARYANA | 127306 | ₹4.6 Cr+₹14.9 L (3.37%) | L2 | Rejected-AOC L2 |
| 3 | L3₹4.8 Cr+₹33.0 L (7.45%)Rejected-AOC 858 SECTOR 23 127021 2021R109 | BHIWANI | HARYANA | 127021 | ₹4.8 Cr+₹33.0 L (7.45%) | L3 | Rejected-AOC L3 |
| 4 | L4₹5.2 Cr+₹74.7 L (16.9%)Rejected-AOC HOUSE NO 3000 SECTOR 15 HOUSING BOARD COLONY SONIPAT 131001 | SONIPAT | SONIPAT | HARYANA | 131001 | ₹5.2 Cr+₹74.7 L (16.9%) | L4 | Rejected-AOC L4 |
| 5 | Rejected-Technical HOUSE NO 953 SECTOR 23 HUDA BHIWANI TEHSIL AND DISTRICT BHIWANI | BHIWANI | BHIWANI | HARYANA | - | - | Rejected-Technical Enlistment expired |
Tender Value
₹4.7 Cr
EMD Value
₹9.5 L
Closing Date
15 Jun 2020, 6:00 pmClosed
Executive Engineer
PHED KOSLI
Const. of independent canal based water works for village Surehli and Aug. of existing water works Sadat Nagar
2020_HRY_130010_1
2797 dt. 15.05.2020
Open Tender
Civil Works
Works
365 days
Public Health Engg. Division Kosli
Please refer Tender documents.
3 documents required · 3 mandatory
₹15,000
Engineer in Chief
₹9.5 L
29 Jun 2020
29 May 2020
16 Jun 2020
29 May 2020
15 Jun 2020
29 May 2020
Amount
Supply & Erection of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. b) Clear water pump set at W/W 900 LPM, 40 mtrs head with squirrel cage induction motor 1440 RPM, 3 phase 50 Hz of suitable rating
Less old motor 600 LPM, 40 mtrs head with squirrel cage induction motor 1440 RPM, 3 phase 50 Hz of suitable rating
c) Clear water pump set at W/W for filling of B/stn. 750 LPM, 40 mtrs head with squirrel cage induction motor 1440 RPM, 3 phase 50 Hz of suitable rating
Less old motor 600 LPM, 40 mtrs head with squirrel cage induction motor 1440 RPM, 3 phase 50 Hz of suitable rating
d) Clear water pump set at B/stn. Nathera 750 LPM, 40 mtrs head with squirrel cage induction motor 1440 RPM, 3 phase 50 Hz of suitable rating
Less old motor 600 LPM, 30 mtrs head with squirrel cage induction motor 1440 RPM, 3 phase 50 Hz of suitable rating
Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900 mm and 400 mm deep having following items complete in all respect as per approved NIT. Clear water pump set 900 LPM x 40mtr. head . a) Main switch 63 Amp. 1 No. & 100 Amp. 1 No. (L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T) c) Amp meter 100x100 mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d) CT 100/3 Nos. (AE/KAPPA/L&T) e) VSS & ASS 1 No. each of approved make f) SPP 1 No. of approved make g) Motor starter, star delta 2 No. for 900 LPM x 40 M Head Motor (L&T Siemens, ABB) h) Capacity KVAR as per site requirement i) Indicating Lamp - One Set J) Change over switch 63 AMP=01 nO. K) Electronic motor protection relay = 01 No (L&T, C&S Siemens)( at W/W Sadat Nagar)
Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900 mm and 400 mm deep having following items complete in all respect as per approved NIT. Clear water pump set 750 LPM x 40mtr. head . a) Main switch 63 Amp. 2 No. & 100 Amp. 1 No. (L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 Volt 2No. (AE/KAPPA/L&T) c) Amp meter 100x100 mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d) CT 100/3 Nos. (AE/KAPPA/L&T) e) VSS & ASS 1 No. each of approved make f) SPP 1 No. of approved make g) Motor starter, star delta 2 No. for 750 LPM x 40 M Head Motor (L&T Siemens, ABB) h) Capacity KVAR as per site requirement i) Indicating Lamp - One Set. J) Change over switch 63 AMP=01 nO. K) Electronic motor protection relay = 01 No (L&T, C&S Siemens)( at W/W Sadat Nagar for filling of B/stn. Nathera)
Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900 mm and 400 mm deep having following items complete in all respect as per approved NIT. Clear water pump set 750 LPM x 40mtr. head . a) Main switch 63 Amp. 2 No. & 100 Amp. 1 No. (L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 Volt 2No. (AE/KAPPA/L&T) c) Amp meter 100x100 mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d) CT 100/3 Nos. (AE/KAPPA/L&T) e) VSS & ASS 1 No. each of approved make f) SPP 1 No. of approved make g) Motor starter, star delta 2 No. for 750 LPM x 40 M Head Motor (L&T Siemens, ABB) h) Capacity KVAR as per site requirement i) Indicating Lamp - One Set. J) Change over switch 63 AMP=01 nO. K) Electronic motor protection relay = 01 No (L&T, C&S Siemens)( at B/stn. Nathera)
Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 500x1200 mm and 400 mm deep having following accessories:- 1. Incomer Switch 200 Amp. 2. Aluminum bus bar chamber of 300 Amp. Capacity. 3. Volt meter 100x100 mm range 0 to 500 V (AE/KAPPA/L&T) 4. Indicating lamp - one set
Supply and fixing following CI D/F pipe and specials/sluice valves /non return valves/ bell mouth/Reflex valves including cost of Jointing materials, laying, jointing, in position as per specification given in schedule No.II Detail of pipe A) Labour for fixing ofCI D/F pipe fabricated DI pipes K-8 & 9 including cost of string out, threading and welding with flanges ( Heavy duty ) on both sides, jointing with nut and bolt ruber jain, of lenth 5.5 mtr. With the pumping machenery, suction and delivery pipes complete in all respeects. ( Including DI pipe Rates of supplies) a) 100 mm i/d
Supply erection, testing of ISI marked copper wire for 6 Nos motors with under ground system in PVC and flexible pipes copper wire size 6mm Sq three core complete in all respects with accessories like thimble etc.
Supply erection, testing of ISI marked copper wire for 6 No panel boards from main switch to panel and wiring of panel with size 16 mm sq 3 core complete in all respects with accessories like thimble etc.
Supply erection, testing of light fittings including wire in the Pump chamber and store room with material upto 10 points including switch, button, plug, PVC conduict pipe & copper wire etc. as per approved specifications.
Providing laying jointing and fixing of cast iron “V” notch duly marked with beam including embedding.
Providing & fixing suitable floating arms along with swivel bend as per required specifications approved by Engineer-incharge (250 mm)
Supply erection, testing of LED light 100 watt with fitting and accessories with blub of appproved make. (Crompton, Bajaj, Philips)
Providing and fixing exhaust fans 18" i/d (450mm) complete with suitable GI sheet of approved make complete in respects.
Providing and fixing ceiling fan 1200 mm (48") with speed adjuster of reputed make (Crompton, Usha, Bajaj, Orient) complete in respects.
Supply & erection of Wall Mounting Type, solenoid driven, motor-less electro-magnetic diaphragm Dozing/ Metering pump working on single-phase, 220/240 V 50 Hz electric supply with standard electronic controls suitable for minimum dozing capacity 0 to 5 LPH at 8 bar back pressure complete with necessary accessories.Make-Fontus or any other standard make Along with supply & erection of 1 No voltage stabilizer with each dozing pump alongwtih 1 No 300 ltrs. Capacity ISI marked HDPE storage tank, with each dozing pump of Sintex or other reputed & approved make. For Water works & Boosting Station
Supply & Erection of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. A) Raw water pump set for Sump well 5400 LPM 40 mtrs head with squirrel cage induction motor 1440 RPM, 3 phase 50 Hz of suitable rating (80 HP)
Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900 mm and 400 mm deep having following items complete in all respect as per approved NIT. Raw water pump set 5400 LPM x 40mtr. head . a) Main switch 63 Amp. 2 No. & 100 Amp. 1 No. (L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 Volt 2 No. (AE/KAPPA/L&T) c) Amp meter 100x100 mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d) CT 100/3 Nos. (AE/KAPPA/L&T) e) VSS & ASS 2No. each of approved make f) SPP 1 No. of approved make g) Motor starter, star delta 1 No. for 5400 LPM x 40 M Head Motor (L&T Siemens, ABB) h) Capacity KVAR as per site requirement i) Indicating Lamp - One Set J) Change over switch 63 AMP=01 nO. K) Electronic motor protection relay = 01 No (L&T, C&S Siemens) ( Raw Water P/Stn. at M/garh Canal)
Providing and fixing medium screening suitable size 1200mm x 620 mmwith 20 mm spacing size of bar x 10 mm thick & 40 mm wide and angle of inclination 75 and material of construction as SS 304 grade as per direction of engineer in charge complete in all respect.
Providing and installing Gantry of 5 Ton capacity single girder, hand operated, overhead travelling crane to suitable span (9 mtr. including 2 mtr cantilever for direct handling from vehicle for lifting and holding the load during hoisting or lowering including cost of monolithic columns construction grinder (vertical and horizontal) with side basing complete in all respect
Provision for truss bridge of span (Canal) of 8 mtrs. On Bhurthla disty. Having capacity pressure of water supply pipe line 400 mm DI pipe including complete foundation complete in all respect.
Supply and fixing following CI D/F pipe and specials/sluice valves /non return valves/ bell mouth/Reflex valves including cost of Jointing materials, laying, jointing, in position as per specification given in schedule No.II detail of pipe 300 mm i/d
Supply erection, testing of ISI marked copper wire for 2 Nos motors with under ground system in PVC and flexible pipes copper wire size 16mm Sq three core complete in all respects with accessories like thimble etc.
Supply erection, testing of ISI marked copper wire for 2 No panel boards from main switch to panel and wiring of panel with size 25 mm sq 3 core complete in all respects with accessories like thimble etc.
Supply erection, testing of light fittings including wire in the Pump chamber and store room with material upto 10 points including switch, button, plug, PVC conduict pipe & copper wire etc. as per approved specifications.
Supply erection, testing of LED light 100 watt with fitting and accessories with blub of appproved make. (Crompton, Bajaj, Philips)
Providing and fixing exhaust fans 18" i/d (450mm) complete with suitable GI sheet of approved make complete in respects.
Providing and fixing ceiling fan 1200 mm (48") with speed adjuster of reputed make (Crompton, Usha, Bajaj, Orient) complete in respects.
Providing and fixing scour arrangement in pipeline complete in all respect including fitting and labour but excluding cost of scour valve chamber to best satisfaction of engineer in charge 400 MM (400X400X1500)
Supply & Erection of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. A) (i) Raw water pump set at W/W 2600 LPM 12 mtrs head with squirrel cage induction motor 1440 RPM, 3 phase 50 Hz of suitable rating
b) Clear water pump set for village Sureheli 900 LPM, 40 mtrs head with squirrel cage induction motor 1440 RPM, 3 phase 50 Hz of suitable rating
c) Clear water pump set for village Nehrugarh 2100 LPM, 50 mtrs head with squirrel cage induction motor 1440 RPM, 3 phase 50 Hz of suitable rating
Supply and fixing following CI D/F pipe and specials/sluice valves /non return valves/ bell mouth/Reflex valves including cost of Jointing materials, laying, jointing, in position as per specification given in schedule No.II a) 100 mm i/d
Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900 mm and 400 mm deep having following items complete in all respect as per approved NIT. Raw water pump set 2600 LPM x 12mtr. head. a) Main switch 63 Amp. 1 No. & 100 Amp. 1 No. (L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T) c) Amp meter 100x100 mm range 0 to 200 Amp. 1 Nos. (AE/KAPPA/L&T) d) CT 100/3 Nos. (AE/KAPPA/L&T) e) VSS & ASS 1 No. each of approved make f) SPP 1 No. of approved make g) Motor starter, star delta 1 No. for 2600 LPM x 12 M Head Motor (L&T Siemens, ABB) h) Capacity KVAR as per site requirement i) Indicating Lamp - One Set J) Change over switch 63 AMP=01 nO. K) Electronic motor protection relay = 01 No (L&T, C&S Siemens)
Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900 mm and 400 mm deep having following items complete in all respect as per approved NIT. Clear water pump set 900 LPM x 40mtr. head 02 No. (one of each pump set). a) Main switch 63 Amp. 1 No. & 100 Amp. 1 No. (L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T) c) Amp meter 100x100 mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d) CT 100/3 Nos. (AE/KAPPA/L&T) e) VSS & ASS 1 No. each of approved make f) SPP 1 No. of approved make g) Motor starter, star delta 1 No. for 900 LPM x 40 M Head Motor (L&T Siemens, ABB) h) Capacity KVAR as per site requirement i) Indicating Lamp - One Set J) Change over switch 63 AMP=01 nO. K) Electronic motor protection relay = 01 No (L&T, C&S Siemens) . (for village Sureheli)
Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900 mm and 400 mm deep having following items complete in all respect as per approved NIT. Clear water pump set 2600 LPM x 50 mtr. head 02 No. (one of each pump set). a) Main switch 63 Amp. 1 No. & 100 Amp. 1 No. (L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T) c) Amp meter 100x100 mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d) CT 100/3 Nos. (AE/KAPPA/L&T) e) VSS & ASS 1 No. each of approved make f) SPP 1 No. of approved make g) Motor starter, star delta 1 No. for 2600 LPM x 50 M Head Motor (L&T Siemens, ABB) h) Capacity KVAR as per site requirement i) Indicating Lamp - One Set J) Change over switch 63 AMP=01 nO. K) Electronic motor protection relay = 01 No (L&T, C&S Siemens) (for village Nehrugarh )
Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 500x1200 mm and 400 mm deep having following accessories:- 1. Incomer Switch 200 Amp. 2. Aluminum bus bar chamber of 300 Amp. Capacity. 3. Volt meter 100x100 mm range 0 to 500 V (AE/KAPPA/L&T) 4. Indicating lamp - one set
Supply erection, testing of ISI marked copper wire for 3 Nos motors with under ground system in PVC and flexible pipes copper wire size 6mm Sq three core complete in all respects with accessories like thimble etc.
Supply erection, testing of ISI marked copper wire for 3 No panel boards from main switch to panel and wiring of panel with size 10 mm sq 3 core complete in all respects with accessories like thimble etc.
Supply erection, testing of light fittings including wire in the Pump chamber and store room with material upto 10 points including switch, button, plug, PVC conduict pipe & copper wire etc. as per approved specifications.
Providing laying jointing and fixing of cast iron “V” notch duly marked with beam including embedding.
Providing & fixing suitable floating arms along with swivel bend as per required specifications approved by Engineer-incharge (250 mm)
Supply erection, testing of LED light 100 watt with fitting and accessories with blub of appproved make. (Crompton, Bajaj, Philips)
Providing and fixing exhaust fans 18" i/d (450mm) complete with suitable GI sheet of approved make complete in respects.
Providing and fixing ceiling fan 1400 mm (56") with speed adjuster of reputed make (Crompton, Usha, Bajaj, Orient) complete in respects.
Supply & erection of Wall Mounting Type, solenoid driven, motor-less electro-magnetic diaphragm Dozing/ Metering pump working on single-phase, 220/240 V 50 Hz electric supply with standard electronic controls suitable for minimum dozing capacity 0 to 5 LPH at 8 bar back pressure complete with necessary accessories.Make-Fontus or any other standard make. Along with supply & erection of 1 No voltage stabilizer with each dozing pump alongwtih 1 No 300 ltrs. Capacity ISI marked HDPE storage tank, with each dozing pump of Sintex or other reputed & approved make. For Water works.
Operation & Maintenance of Water Works as per Schedule-IV for a period of Six years including existing civil structures with rising main afterone year defect liability period (with be charged to the A/Mtc. estimate) with 3 month trial run perioed .
Bidder Name
Amount
M/S SHREE BALAJI BUILDERS
Jaiveer Singh Contractor
BHARAT SINHMAR
VIKASH BADESRA CONT
BHARAT SINHMAR
M/S SHREE BALAJI BUILDERS
Jaiveer Singh Contractor
M/S SHREE BALAJI BUILDERS
VIKASH BADESRA CONT
Jaiveer Singh Contractor
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .