Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹5.9 Cr
EMD Value
₹5.9 L
Closing Date
29 Aug 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club.
NBCC/SBG/O/BBSR/DMF/JAJPUR/2022/33
NBCC/SBG/O/BBSR/DMF/JAJPUR/2022/33
Open Tender-Domestic
Civil Works General
Jajapur, Odisha
₹11,800
₹5.9 L
29 Aug 2022
17 Aug 2022
29 Aug 2022
29 Aug 2022
31 Aug 2022
ABSTRACT OF COST
SL.NO. DESCRIPTION OF WORK TOTAL AMOUNT (Rs.)
SL.NO. DESCRIPTION OF WORK TOTAL AMOUNT (Rs.)
ABSTRACT OF COST FOR CONSTRUCTION OF COTTAGES
2.0 ELECTRICAL WORK 39,98,013.46
3.0 PLUMBING WORK 3,96,000.80
ABSTRACT OF COST FOR RENOVATION OF EXISTING
5.0 CIVIL WORK 56,69,846.66
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports
Persons at Jajpur Sports Club
ABSTRACT OF COST OF COTTAGES
SL.N TOTAL AMOUNT
SL.N TOTAL AMOUNT
DESCRIPTION OF WORK
I EARTH WORK 8,01,692.42
II CONCRETE WORK 9,59,222.49
III REINFORCED CEMENT CONCRETE WORK 82,00,805.77
IV BRICK WORK 16,90,099.39
V MARBLE & GRANITE WORK 5,79,059.05
VI WOOD AND P.V.C. WORK 74,11,761.05
VII STEEL WORK 88,66,812.51
VIII FLOORING WORK 29,87,954.92
IX ROOFING WORK 87,05,023.36
X FINISHING WORK 19,84,209.77
XIII WATER PROOFING WORK 35,251.10
B PLUMBING WORK :
I SANITARY FIXTURES & CP BRASS FITTINGS 2,66,869.51
II SOIL, WASTE, VENT & RAIN WATER PIPES 85,269.57
III WATER SUPPLY SYSTEM 43,861.72
C ELECTRICAL WORKS:
I INTERNAL ELECTRICAL WORKS 39,98,013.46
I AIR CONDITIONING WORK 31,59,304.21
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
I 2.0 EARTH WORK
Earth work in ordinary soil with initial lead and lift including
rough dressing in layers not exceeding 0.3m in depth and the
Earth transported by transport vehicles as directed by the
Engineer-in-charge.
Extra lift or 1.5m or part there of over the initial lift of 1.5m in all
2 2 kinds of embankments and road works and ordinary earth work
a) 1st Extra lift of 1.5m (up to 7.5m) cum 292.60 18.14 5307.08
Single under reamed pile foundation with RCC M25 using
12mm size black hard granite crusher broken chips including
3 3 cost of borring but excluding cost of M.S./Tor steel and labour
charges for cutting, bending and binding of steel.
a 375mm dia and 6.0M long. each 35.00 8184.60 286460.93
i) For each additional depth of 0.5m beyond initial depth of 6.0m
add extra to the rate
Filling in foundation and plinth with excavated materials
4 4 including watering and ramming as directed by the Engineer-in- cum 1011.11 94.40 95448.66
charge of earth work.
5 5 Transportation of earth from site upto 15km cum 187.35 280.45 52541.66
Filling in foundation and plinth with filling sand, watered and
rammed including cost of material, labour, royality and
transportation etc. complete as per specifications and as
directed by Engineer-in-charge.
Supplying chemical emulsion in sealed containers including
delivery as specified.
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Chlorpyriphos/ Lindane emulsifiable concentrate of 20% litre 10.74 203.55 2185.43
Diluting and injecting chemical emulsion for POST-
8 Sor CONSTRUCTIONAL anti-termite treatment (excluding the cost
of chemical emulsion) :
Treatment of soil under existing floors using chemical emulsion
@ one litre per hole, 300 mm apart including drilling 12 mm
diameter holes and plugging with cement mortar 1 :2 (1 cement
: 2 Coarse sand) to match the existing floor:
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
TOTAL EARTH WORK 801692.42
II 4.0 CONCRETE WORK
C.C (1:3:6) with 25mm to 40mm size crrusher broken metal
including all cost, conveyance,royalty & taxes etc.comp.to work
site as per specification approved by the department & direction
Cement concrete (1:2:4) with 12mm size hard broken granite
C.C (1:4:8) with 25mm to 40mm size crrusher broken metal
including all cost, conveyance,royalty & taxes etc.comp.to work
site as per specification approved by the department & direction
TOTAL CONCRETE WORK 959222.49
III 5.0 REINFORCED CEMENT CONCRETE WORK
Providing M.S. reinforcement for R.C.C. work including cutting,
12 10 bending, binding and tying the grills and placing in position Qtl. 555.19 9252.62 5136994.75
including cost of binding wire 18 to 20 gauge. Digitally signed by RAJESH
RAJESH DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Providing, hoisting laying of Reinforced Cement concrete of
Grade M-25 including all material & labour charges and also
13 11 including shuttering and centring but excluding reinforcement
etc. complete as per specifications and as directed by Engineer-
in-Charge of the project.
b Column pedestals cum 4.00 13097.88 52399.91
c Columns below plinth cum 14.98 13097.88 196241.11
d Grade slab under floor on plinth lvl. cum 53.68 11187.82 600595.53
e Plinth beam cum 34.63 6695.91 231886.73
g Wash basine counters sqm 4.28 956.39 4097.17
h Chhajjah sqm 4.66 956.39 4458.69
k Lintels on doors & windows cum 5.33 10460.46 55796.11
l Columns above plinth cum 47.91 13097.88 627566.68
TOTAL REINFORCED CEMENT CONCRETE WORK 8200805.77
IV 6.0 BRICK WORK
Brick work withFly ash bricks 25 cm x 12 cmx8cm size having
crushing strength not less than 75 Kg/cm2 with dimensional
tolerance +8 percent in cement mortar (1:6) in foundation.
Brick work withFly ash bricks 25 cm x 12 cmx8cm size having
crushing strength not less than 75 Kg/cm2 with dimensional
tolerance +8 percent in cement mortar (1:6) in Super Structure
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Providing and laying autoclaved aerated cement blocks
masonry with 150mm/230mm/300 mm thick AAC blocks in
super structure above plinth level up to floor V level with RCC
band at sill level and lintel level with approved block laying
polymer modified adhesive mortar all complete as per direction
of Engineer-in-Charge. (The payment of RCC band and
reinforcement shall be made for seperately).
a Ground Floor cum 131.33 5622.46 738414.78
TOTAL BRICK WORK 1690099.39
V 8.0 MARBLE & GRANITE WORK
Providing and fixing 18 mm thick gang saw cut, mirror polished,
premoulded and prepolished, machine cut for kitchen platforms,
vanity counters, window sills, facias and similar locations of
required size, approved shade, colour and texture laid over 20
16 SOR mm thick base cement mortar 1:4 (1 cement : 4 coarse sand),
joints treated with white cement, mixed with matching pigment,
epoxy touch ups, including rubbing, curing, moulding and
polishing to edges to give high gloss finish etc. complete at all
Granite of any colour and shade
Area of slab over 0.50 sqm sqm 42.84 3348.37 143444.09
Providing edge moulding to 18 mm thick marble stone counters,
Vanities etc., including machine polishing to edge to give high
gloss finish etc. complete as per design approved by Engineer-
Granite work metre 71.40 348.10 24854.34
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Extra for fixing marble /granite stone, over and above
corresponding basic item, in facia and drops of width upto 150
mm with epoxy resin based adhesive, including cleaning etc.
Extra for providing opening of required size & shape for wash
basin/ kitchen sink in kitchen platform, vanity counter and
similar location in marble/ Granite/ stone work, including
necessary holes for pillar taps etc. including moulding, rubbing
and polishing of cut edges etc. complete.
Fixing tiles/Marbles in dados skirting and risers of step on
12mm thick cement plaster (1:3) jointed with neat cement slurry
mixed with pigment to match the shades of the tiles etc.
Vitrified Tile 600mmx600mm Coloured / Printed series
a Ground Floor sqm 166.03 1123.60 186552.05
TOTAL MARBLE & GRANITE WORK 579059.05
VI 9.0 WOOD AND P.V.C. WORK
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Providing and fixing factory made single extruded WPC (Wood
Polymer Composite) solid door/window/Ceosetory window s
& other Frames/Chowkhat comprising of virgin PVC polymer of
K value 58-60 (Suspension Grade), calcium carbonate and
natural fibers (wood powder/ rice husk/wheat husk) and non
tox ic additives (maximum toxicity index of 12 for 100 gms)
fabricated with miter jo ints after applying PVC solvent cement
and screwed with full body threaded star headed SS screws
having minimum f rame density of 750 kg/cum, screw
withdrawal strength of 2200 N (Face) & 1100 N (Edge) ,
minimum compressive strength of 58 N/mm2, modulus of elast
21 SOR icity 900 N/mm2 and resistance to spread of flame of Class A
category with property of being termite/borer proof,
water/moisture proof and fire retardant and fixed in position with
M.S hold fast/lugs/SS dash fa steners of required dia and
length complete as per direction of Engineer-In - Charge . (M.S
hold fast/lugs or SS dash fasteners shall be paid for separate
Note: For WPC solid door/window frames , minus 5mm
tolerance in dimensions i.e. depth and width of profile shall be
acceptable . Variation in profile dimensions on plus side shall be
acceptab le but no extra payment on this account shall be made
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Supplying, fitting and fixing well dressed and well seasoned sal
wood choukaths framed and fixed including two coats coats of
coaltaring to wall and lintel side faces of choukaths including
cost of coaltar and labour for coaltaring and fixing required nos.
of W.I. clamps to the choukaths with approved qualities of
screws including cost, conveyance, loading required for the metre 177.80 1518.54 269996.77
work etc. complete in all respect with cost, conveyance,
royalties, loading, unloading and taxes of all materials and cost
of all labour, T&P, sundries, scaffolding etc. required for the
work complete in all respect as per specification and direction of
Engineer in Charge
Providing and fixing ISI marked flush door shutters conforming to IS :
2202 (Part I) non-decorative type, core of block board construction with
22 SOR frame of 1st class hard wood and well matched commercial 3 ply
veneering with vertical grains or cross bands and face veneers on both
faces of shutters:
35 mm thick including ISI marked Stainless Steel butt hinges with
necessary screws
Extra for providing lipping with 2nd class teak wood battens 25
23 SOR mm minimum depth on all edges of flush door shutters (over all sqm 64.68 407.10 26331.23
area of door shutter to be measured).
Providing and fixing wooden moulded beading to door and
24 SOR window frames with iron screws, plugs and priming coat on
unexposed surface etc. complete :
2nd class teak wood
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Providing 40x5 mm flat iron hold fast 40 cm long including fixing
to frame with 10 mm diameter bolts, nuts and wooden plugs
25 SOR and embedding in cement concrete block 30x10x15cm 1:3:6 each 420.00 132.75 55755.00
mix (1 cement : 3 coarse sand : 6 graded stone aggregate
20mm nominal size).
dormakaba BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size
27 MR 4" x 3" x 3mm, in SS 304 and in SSS finish. Suitable for door each 140.00 368.16 51542.40
weights upto 120kgs. Template Drilled
dormakabakaba ML 550S Digital Mortise lock in standard
design accessible by Fingerprint (100 nos.), RFID (100 Nos.),
PIN (4 Nos.), BLE (10 mobiles), Mechanical Keys (3 nos.).
Emergency Power: external 9VDC alkaline battery. Mortise lock
in Black with Bright Chrome Rim finish. Remote Control
dormakaba floor stop half dome with 45mm dia with fixing
accessories, in satin Chrome
Providing and fixing aluminium die cast body tubular type
universal hydraulic door closer (having brand logo with ISI, IS :
30 SOR 3564, embossed on the body, door weight upto 35 kg and door each 35.00 982.11 34373.99
width upto 700 mm), with necessary accessories and screws
Providing & Fixing decorative high pressure laminated sheet of
plain / wood grain in gloss / matt/ suede finish with high density
31 SOR protective surface layer and reverse side of adhesive bonding
quality conforming to IS : 2046 Type S, including cost of
adhesive of approved quality.
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Providing and fixing factory made uPVC white colour fixed
glazed windows/ventilators comprising of uPVC multi-
chambered frame and mullion (where ever required) extruded
profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild
steel section made from roll forming process of required length
(shape & size according to uPVC profile), uPVC extruded
glazing beads of appropriate dimension, EPDM gasket, G.I
fasteners 100 x 8 mm size for fixing frame to finished wall,
plastic packers, plastic caps and necessary stainless steel
screws etc. Profile of frame shall be mitred cut and fusion
welded at all corners, mullion (if required) shall be also fusion
welded including drilling of holes for fixing hardware's and
32 drainage of water etc. After fixing frame the gap between frame
and adjacent finished wall shall be filled with weather proof
silicon sealant over backer rod of required size and of approved
quality, all complete as per approved drawing & direction of
Engineer-in-Charge. (Single / double glass panes and silicon
sealant shall be paid separately).
Note: For uPVC frame, sash and mullion extruded profiles
minus 5% tolerance in dimension i.e. in depth & width of profile
shall be acceptable. Variation in profile dimension in higher side
shall be accepted but no extra payment on this account shall be
Fixed window / ventilator made of (small series) frame 47 x 50
mm & mullion 47 x 68 mm both having wall thickness of 1.9 ±
0.2 mm and single glazing bead of appropriate dimension.
(Area upto 0.75 sqm.)
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Providing and fixing factory made uPVC white colour sliding
glazed window upto 1.50 m in height dimension comprising of
uPVC multi-chambered frame with in-built roller track and sash
extruded profiles duly reinforced with 1.60 ± 0.2 mm thick
galvanized mild steel section made from roll forming process of
required length (shape & size according to uPVC profile),
appropriate dimension of uPVC extruded glazing beads and
uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy
(white powder coated) touch locks with hook, zinc alloy body
with single nylon rollers (weight bearing capacity to be 40 kg),
G.I fasteners 100 x 8 mm size for fixing frame to finished wall
and necessary stainless steel screws etc. Profile of frame &
sash shall be mitred cut and fusion welded at all corners,
DSR including drilling of holes for fixing hardware's and drainage of
Analysis water etc. After fixing frame the gap between frame and
adjacent finished wall shall be filled with weather proof silicon
sealent over backer rod of required size and of approved
quality, all complete as per approved drawing & direction of
Engineer-in-Charge. (Single / double glass panes, wire mesh
and silicon sealent shall be paid separately)
Note: For uPVC frame and sash extruded profiles minus 5%
tolerance in dimension i.e. in depth & width of profile shall be
acceptable. Variation in profile dimension in higher side shall be
accepted but no extra payment on this account shall be made.
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Three track three panels sliding window with fly proof SS wire
mesh (Two nos. glazed & one no. wire mesh panels) made of
(small series) frame 92 x 44 mm & sash 32 x 60 mm both
having wall thickness of 1.9 ± 0.2 mm and single glazing bead
of appropriate dimension (Area of window upto 1.75 sqm).
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Structure glaze Series with Door and Window
Providing and fixing flat face structure glaze aluminum section
as per JIS A4706 AND JIS A4702 of 60x100/200mm, door
profile size top and bottom 40x100mm and window section size
should be 40x 80mm, extruded aluminum sections should be
made from Grade 6063-T5 , & Anodized with Texguard coating
.All profiles should be Non insulated Profiles. All other major
Accessories should be manufactured by the same
4.1 Hardware should be as per approved makes and same
DSR manufacturer of the system.
34 All materials which are used in should be corrosion-resistant so each 66.15 10431.26 690028.01
that the good functioning in different environments and that
there are no negative influences either on the aluminum or on
the surface treatment.
The system should allow the application of glazing or panels
with thickness up to 12 mm .The external perimeter of
aluminum sections should be Anodized with Texguard coating
Marion face 60mm, Wind pressure:- 1600 Pa, Water tightness:-
500 Pa, Air tightness A-4. Both Frame and Casement should be
made in Thailand. Approved make: Tostem or equivalent
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Modular Kitchen:-
Providing and fixing both sides of laminate finish kitchen
cabinet with shelf in 18 mm HDHMR E1 Grade pre
laminate with 22mm HMR MDF E1 Grade PVC Membrane
finish shutter with Majestic profile & tony handles. All
ends should have edge banding tape of M/s Rehau / sqm 45.05 103851.80 4678004.33
Dolkin 0.8mm thickness for cabinet. Back Panel pre
laminated 5mm HDHMR. Carcass to be supplied in knock
down condition with pre factory drill for mini fix, dowels,
Shelf with shelf supports and drawer and 100mm
adjustable legs & hettich fitting with Majestic handles
TOTAL WOOD AND P.V.C. WORK 7411761.05
VII 10.0 STEEL WORK
Structural steel work in single section, fixed with or without
connecting plate,including cutting, hoisting, fixing in position
and applying a priming coat of approved steel primer all
Steel work in built up tubular/built up sections/ framed work,
(round, square or rectangular hollow tubes etc.) trusses etc.,
including chequered plates, cutting, hoisting, fixing in position
and applying a priming coat of approved steel primer, including
welding and bolted with special shaped washers etc. complete.
Electric resistance or induction butt welded tubes kg 48314.70 128.97 6231340.12
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Providing and fixing roofing consist of 0.9 mm thick galvanized steel
deck sheet confirming to IS 277:1992 used as permanent shuttering
over which MS wire mesh 3mm laid at 100x100 mm grid including
38 MR edge trim covered with concrete. This metal deck will be supported on sqm 39.90 1711.00 68268.90
structural steel beam with shear studs. (Structural steel like Beam,
column, joists etc. & concrete of different grade as per design will be
paid separately).
Providing and fixing 10 mm plain toughened glass SS railing
with wooden top handrail 40 mm X 40 mm, of CP2 sagwan
wood including PU polish in mat finish and bottom 80 mm X 40
mmaluminium profile of wooden color powder coating all
complete, under the supervision of Engineer-in-Charge.
DSR Providing & fixing fly proof wire gauze to windows, clerestory
40 analysis windows & doors with M.S. Flat 15x3 mm and nuts & bolts
10.29 complete.
Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and
1.4 mm aperture on both sides
TOTAL STEEL WORK 8866812.51
VIII 11.0 FLOORING WORK
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Providing and fixing in position solid hard wood flooring with
plank thickness of not less than 15 mm ,width not less than 120
mm and length not less than 1830 mm((except at wall end) from
reputed manufacturer .The flooring shall be fixed with tongue &
groove interlocking system with clip method /(synthetic
adhesive).Two planks are jointed with help of stainless steel clip
/(synthetic adhesive ) to ensure control of expansion during
climatic changes. Installation is done over 4 mm thick expanded
polythene foamsheets to give cushioning effect ,over prepared
suface with necessary skirting of same material as of flooring.
The aluminium anodized matching matching color transition
profiles and nosing to be fixed where ever required . The
flooring should have environmental friendly certification of forest
steward council (FSC). The moisture content shall be not
exceeding B0.6 and fire classification shall be cf1-s1 category
(DIN EN 13501-1) ,all complete as per direction of the engineer
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Providing and fixing machine cut, mirror/ eggshell polished ,
Marble stone work for wall lining (veneer work) including dado,
skirting, risers of steps etc., in required design and pattern (if
required with marble stone slab pieces of different shapes,
sizes & texture but of even thickness) on 12 mm (average) thick
cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed
with white cement slurry @ 3.3 kg/sqm including pointing with
white cement slurry admixed with pigment of matching shade,
including rubbing, curing, polishing etc. all complete as per
Architectural drawings, and as directed by the Engineer-in-
18 mm thick Italian Marble stone slab,Perlato, Rosso erona,
Fire Red or Dark Emperadore etc.
Providing and laying machine cut, mirror polished, Italian
Marble stone flooring laid in required pattern in linear portion of
the building all complete as per architectural drawings, with 18
mm thick stone slab laid over 20 mm (average) thick base of
cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed
with white cement slurry @ 4.4 kg/sqm including pointing with
white cement slurry admixed with pigment to match the marble
shade including rubbing, curing and polishing etc. all complete
as specified and as directed by the Engineer-in-Charge.
Polished Granite stone slab colour of Black, Cherry/Ruby Red
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Providing and laying Polished Granite stone flooring in
required design and patterns, in linear as well as
curvilinear portions of the building all complete as per the
architectural drawings with 18 mm thick stone slab over 20
mm (average) thick base of cement mortar 1:4 (1 cement :
4 coarse sand) laid and jointed with cement slurry and
pointing with white cement slurry admixed with pigment of
matching shade including rubbing , curing and polishing
etc. all complete as specified and as directed by the
Engineer-in-Charge.
Polished Granite stone slab jet Black, Cherry Red, Elite
Brown, Cat Eye or equivalent.
a Ground Floor sqm 505.10 3038.97 1534992.35
LAMINATE PANELING: P/F of wooden Sound proof
paneling made using frame work of Gyproc make
Standard floor / Stud sections 2’ C/C fixed to walls using
standard PVC sleeves / screw, to be covered with 12 MM
45 MR ply (make ………), space between wall and ply to be filled sqm 0.00 7796.26
with glass wool 3’th in fiber mesh. Facia to be covered
with 1 mm laminate (make…….) as per drawing and
design. Rates to be inclusive of all material, labor,
wastage hardware T&P etc.
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Supplying, fitting ,fixing vitrified tile of ( Printed ) in floors of
size 600mmx600mm of approved make conferming to IS:13755
laid on 20mm thick cement mortar (1:4) (1 cement:4 sand) and
46 SOR filling joints with white cement of approved quality including cost
of all materials,labour T&P etc required for the work all
complete as per the direction of Engineer-in-charge.
a Ground Floor sqm 34.02 1099.17 37393.76
b First Floor sqm 34.02 1110.97 37795.20
Fixing tiles/Marbles in dados skirting and risers of step on
12mm thick cement plaster (1:3) jointed with neat cement slurry
mixed with pigment to match the shades of the tiles etc.
Granite tiles (above 0.40 Sqm. 20mm thick.)
a Ground Floor sqm 161.39 2785.51 449553.83
b First Floor sqm 38.67 2822.09 109119.56
TOTAL FLOORING WORK 2987954.92
IX 12.0 ROOFING WORK
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement :
2 coarse sand : 4 stone aggregate 10 mm and down gauge),
including finishing with cement mortar 1:3 (1 cement : 3 fine
sand) as per standard design :
In 75x75 mm deep chase metre 0.00 118.47 0.00
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Providing and fixing false ceiling at all height including providing
and fixing of frame work made of special sections, power
pressed from M.S. sheets and galvanized with zinc coating of
120 gms/sqm (both side inclusive) as per IS : 277 and
consisting of angle cleats of size 25 mm wide x 1.6 mm thick
with flanges of 27 mm and 37mm, at 1200 mm centre to centre,
one flange fixed to the ceiling with dash fastener 12.5 mm dia x
50mm long with 6mm dia bolts, other flange of cleat fixed to the
angle hangers of 25x10x0.50 mm of required length with nuts &
bolts of required size and other end of angle hanger fixed with
intermediate G.I. channels 45x15x0.9 mm running at the
spacing of 1200 mm centre to centre, to which the ceiling
section 0.5 mm thick bottom wedge of 80 mm with tapered
flanges of 26 mm each having lips of 10.5 mm, at 450 mm
49 SOR centre to centre, shall be fixed in a direction perpendicular to
G.I. intermediate channel with connecting clips made out of
2.64 mm dia x 230 mm long G.I. wire at every junction,
including fixing perimeter channels 0.5 mm thick 27 mm high
having flanges of 20 mm and 30 mm long, the perimeter of
ceiling fixed to wall/partition with the help of rawl plugs at 450
mm centre, with 25mm long dry wall screws @ 230 mm interval,
including fixing of gypsum board to ceiling section and
perimeter channel with the help of dry wall screws of size 3.5 x
25 mm at 230 mm c/c, including jointing and finishing to a flush
finish of tapered and square edges of the board with
recommended jointing compound , jointing tapes , finishing with
jointing compound in 3 layers covering upto 150 mm on both
sides of joint and two coats of primer suitable for board, all as
per manufacturer's specification and also including the cost of
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG)
board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS sqm 551.57 1037.57 572289.50
certification marks)
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Providing and fixing tiled false ceiling of specified materials of
size 595x595 mm in true horizontal level, suspended on inter
locking metal grid of hot dipped galvanized steel sections (
galvanized @ 120 grams/ sqm, both side inclusive) consisting
of main "T" runner with suitably spaced joints to get required
length and of size 24x38 mm made from 0.30 mm thick
(minimum) sheet, spaced at 1200 mm center to center and
cross "T" of size 24x25 mm made of 0.30 mm thick (minimum)
sheet, 1200 mm long spaced between main "T" at 600 mm
center to center to form a grid of 1200x600 mm and secondary
cross "T" of length 600 mm and size 24x25 mm made of 0.30
mm thick (minimum) sheet to be interlocked at middle of the
1200x600 mm panel to form grids of 600x600 mm and wall
angle of size 24x24x0.3 mm and laying false ceiling tiles of
50 SOR approved texture in the grid including, required cutting/making,
opening for services like diffusers, grills, light fittings, fixtures,
smoke detectors etc. Main "T" runners to be suspended from
including fixing perimeter channels 0.5 mm thick 27 mm high
having flanges of 20 mm and 30 mm long, the perimeter of
ceiling fixed to wall/partition with the help of rawl plugs at 450
mm centre, with 25mm long dry wall screws @ 230 mm interval,
including fixing of gypsum board to ceiling section and
perimeter channel with the help of dry wall screws of size 3.5 x
25 mm at 230 mm c/c, including jointing and finishing to a flush
finish of tapered and
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
GI Metal Ceiling Lay in perforated Tegular edge global white
color tiles of size 595x595 mm and 0.5 mm thick with 8 mm
drop; made of GI sheet having galvanizing of 100 gms/sqm
(both sides inclusive) and 20% perforation area with 1.8 mm dia
holes and having NRC (Noise Reduction Coefficient ) of 0.5, sqm 68.04 1500.72 102109.26
electro statically polyester powder coated of thickness 60
microns (minimum), including factory painted after bending and
perforation, and backed with a black Glass fiber acoustical
Supply and fixing of Kingspan KingZip “SELF SUPPORTED”
SECRET FIX STANDING ROOFING SYSTEM 0.9mm THICK
AA 3004 ALUMINIUM ALLOY. The general roof-construction
shall comprise of:
(1) First Layer (Top layer) – Kingspan KingZip Aluminium
65/400 profile sheeting manufactured from aluminium self-
supported standing seam roof system from aluminium alloy AA
3004 H44 (AlMn1Mg1) as specified in BS EN 1396: 2007
material thickness of 0.9mm with PVDF2 finish (standard
colours ) on the exposed surface. The profiled roof panel should
have 24nos. of Micro ribs of height 1.5mm in between 3Nos of
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
for extra strength Accessories, Fasteners. The material
properties shall be as follows: Ultimate tensile strength:
minimum 200 N/mm2, 0.2% Proof Stress: min 185 N/mm2,
Modulus of elasticity: 70,000 N/mm2.The roof panels shall
follow the building profile . Halters to be fixed to the purlins with
SS 304 screws All installation is to be carried out by approved
trained roofing installer. The roofing system provider shall be
certified with a British Board of Agreement and should have
Factory Mutual (FM-4471) & UL Certification (UL-90), Thomas
Bell Wright Certification and should have at least 2 roll formers
not less than four years old in India. All installation is to be
carried out by approved and trained roofing installer.
(2) Second layer: Insulation – Layer of Rockwool insulation of
100mm thickness each minimum 60 kg/m³ density with thermal
conductivity of K=0.038 W/mk at 20 degrees Celsius when sqm 603.93 7675.19 4635307.49
tested to ASTM C518.
(3) Third layer: Single layer of aluminium foil of minimum
thickness 0.2 mm.
(4) Fourth Layer - Aluminium Halters of suitable height with
thermal barrier pads to be fixed to the sub purlins with SS 304
5) Fifth Layer: Steel Deck liner – Solid 28- 35 /200-250
galvalume colour coated steel deck liner (GSM 150) 550 MPa,
0.5 mm TCT 1000 mm ribs spanning up to 1400 mm maximum
centres (multiple spans). The finish to the exposed surface of
the liner will be polyester coating with film thickness of 23μm +/-
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Aluminium Flashing 0.9mm thick:
Flashings manufactured from aluminium alloy AA
3004(AlMn1Mg1) as specified in BS EN 1396: 2007 material
52 MR thickness of 0.9 mm and Fluorocarbon PVDF finish on the rm 420.00 2398.50 1007371.43
exposed surface. The material shall be same colour& material
as of roofing sheet. Girth – 400mm to 560mm
Providing and fixing of 2 mm thick Aluminium gutter with double
side vulcanised rubber Expansion joints at every 8m length.
Necessary down take spout with diameter upto 150 mm at
required intervals & other accessories like Cover plate, end
caps and welding at joints. The Girth of gutter would be upto
1200mm. The gutter will be insulated with 50mm thk, 48 kg/m3
density sandwiched between the aluminium gutter top sheet
and liner at the bottom.
TOTAL ROOFING WORK 8705023.36
X 13.0 FINISHING WORK
53 SOR 12mm thick cement plaster (1:6) on brick work. sqm 1980.48 164.96 326707.08
16mm thick cement plaster (1:6) over brick or stone masonry.
6 mm thick cement plaster (1:4) to R CC surfaces finished
55 SOR smooth including closed deep chiping and slury treatment. Per sqm 57.34 185.26 10623.64
Providing and applying plaster of paris putty of 2 mm thickness
56 SOR over plastered surface to prepare the surface even and smooth sqm 2532.04 288.87 731418.05
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Finishing walls with textured exterior paint of required shade
:New work (Two or more coats applied @ 3.28 ltr/10 sqm) over
57 SOR and including priming coat of exterior primer applied @ sqm 1264.83 241.55 305514.63
Painting 2 coats with any enamel paint on new work over
primer including cost of paint & primer , labour.
Painting two coats to the wall surface by using 100% premium
Acrylic emulsion paint to interior wall surface over a coat of
primer with water bond cement primer after preparing the
59 SOR surface smooth by applying putty punning with Synthetic Acrylic sqm 1418.21 92.14 130667.51
wall putty including finishing the surface smooth by sand
papering in all heights etc. complete in all respect.
Applying priming coats with primer of approved brand and
manufacture, having low VOC (Volatile Organic Compound )
60 13.85 content. With ready mixed pink or grey primer on wood work sqm 1418.21 82.11 116453.03
(hard and soft wood) having VOC content less than 50 grams/
TOTAL FINISHING WORK 1984209.77
XII 21.0 ALUMINIUM WORK
Providing and fixing glazing in aluminium door, window,
ventilator shutters and partitions etc. with EPDM rubber /
61 SOR neoprene gasket etc. complete as per the architectural
drawings and the directions of engineer-in-charge . (Cost of
aluminium snap beading shall be paid in basic item):
With float glass panes of 4.0 mm thickness (weight not less
than 10 kg/ sqm)
TOTAL ALUMINIUM WORK 0.00
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
XIII 22.0 WATER PROOFING WORK
Providing and laying water proofing treatment to vertical and
horizontal surfaces of depressed portions of W.C., kitchen and
the like consisting of:
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed
with water proofing compound conforming to IS 2645 in
recommended proportions including rounding off junction of
vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3
coarse sand) mixed with water proofing compound in
recommended proportion including rounding off junction of
vertical and horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied
hot at 1.7 kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at
joints of PVC sheet should be 100 mm wide and pasted to each
other with bitumen @ 1.7 kg/sqm).
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Providing and laying integral cement based water proofing
treatment including preparation of surface as required for
treatment of roofs, balconies, terraces etc consisting of
following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of
cement admixed with water proofing compound conforming to
IS. 2645 and approved by Engineer-in-charge over the RCC
slab including adjoining walls upto 300 mm height including
cleaning the surface before treatment.With average thickness
of 120 mm and minimum thickness at khurra as 65 mm.
(b) Laying brick bats with mortar using broken bricks/brick bats
25 mm to 115 mm size with 50% of cement mortar 1:5 (1
cement : 5 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineer-
63 SOR in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 sqm 0.00 1679.26 0.00
cement :5 coarse sand ) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineer-
in-charge to required slope and treating similarly the adjoining
walls upto 300 mm height including rounding of junctions of
walls and slabs.
(c) After two days of proper curing applying a second coat of
cement slurry using 2.75 kg/ sqm of cement admixed with water
proofing compound conforming to IS : 2645 and approved by
Engineerin- charge.
(d) Finishing the surface with 20 mm thick jointless cement
mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water
proofing compound conforming to IS : 2645 and approved by
Engineerin- charge including laying glass fibre cloth of
approved quality in top layer of plaster and finally finishing the
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR CONSTRUCTION OF COTTAGES
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
TOTAL WATER PROOFING WORK 35251.10
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club.
Plumbing work of Cottages
S. No. Description TOTAL AMOUNT
S. No. Description TOTAL AMOUNT
1 Sanitary Fixtures & CP Brass Fittings 266869.51
2 Soil, Waste, Vent & Rain Water Pipes 85269.57
3 Water Supply System 43861.72
Total 396000.80
RAJESH Digitally signed by RAJESH
PL Estimate Page-1 DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club.
BOQ of Plumbing work
S. No. DSR 2021 Description of Item Unit Qty Rate( Rs) Amount(Rs)
Sanitary Fixtures & CP Brass Fittings
1.0 17.78. Providing and fixing white vitreous china
extended wall mounting water closet of size of
approved shape including providing & fixing
white vitreous china cistern with dual flush
fitting, of flushing capacity 3 litre/ 6 litre
(adjustable to 4 litre/ 8 litres), including seat
cover, and cistern fittings, nuts, bolts and gasket
etc complete. Each 2 26550.00 53100
2.0 MR Providing and fixing in position best indian Health
Faucet with 8mm dai 1 meter long Flaxible Tube
and wall bracket with N. R. V. (nonreturn wall). Each 2 26550.00 53100
3.0 DSR-17.7A Providing and fixing wash basin with C.I.
brackets, 15 mm dia CP Brass single hole basin
mixer of approved quality and make, including
painting of fittings and brackets, cutting and
making good the walls wherever required:-
3.1 a White Vitreous China Wash basin size 550x400
mm with a 15 mm C.P. brass single hole basin
RAJESH Digitally signed by RAJESH
PL-Estimate Page-2 DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
S. No. DSR 2021 Description of Item Unit Qty Rate( Rs) Amount(Rs)
4.0 17.10 Providing and fixing Stainless Steel A ISI 304
(18/8) kitchen sink with mat finish as per IS
13983 with C.I. brackets and stainless steel plug
40 mm including painting of fittings and brackets,
cutting and making good the walls wherever
4.1 17.10.1.3 Kitchen sink with drain board 510x1040 mm,
bowl depth 200mm. Each 2 14750.00 29500
5 DSR-17.22B Providing and fixing CP Brass Single lever
telephonic wall mixer of quality & make as
approved by Engineer in charge.
5.1 (a) 15 mm nominal dia Each 2 11800.00 23600
6 17.22A Providing and fixing CP Brass 32mm size Bottle
Trap of approved quality & make and as per the
direction of Engineer-in-charge. Each 2 1042.00 2083.998
7 17.34 Providing and fixing toilet paper holder :
8 18.22 Providing and fixing C.P. brass shower rose with
15 or 20 mm inlet :
RAJESH Digitally signed by RAJESH
PL-Estimate Page-3 DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
S. No. DSR 2021 Description of Item Unit Qty Rate( Rs) Amount(Rs)
9 18.49 Providing and fixing C.P. brass bib cock of
approved quality conforming to IS:8931 :
10 18.51 Providing and fixing C.P. brass long body bib
cock of approved quality conforming to IS
standards and weighing not less than 690 gms.
11 18.53 Providing and fixing C.P. brass angle valve for
basin mixer and geyser points of approved quality
conforming to IS:8931
12 DSR-18.53A Providing and fixing C.P. Brass extension nipple
(size 15mmx50mm) of approved make and quality
as per direction of Engineer-in-charge.
RAJESH Digitally signed by RAJESH
PL-Estimate Page-4 DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
S. No. DSR 2021 Description of Item Unit Qty Rate( Rs) Amount(Rs)
13 18.65 Providing and fixing PTMT soap Dish Holder
having length of 138mm,
breadth 102mm, height of 75mm with concealed
fitting arrangements,
weighing not less than 106 gms
14 17.72 Providing and fixing PTMT towel ring trapezoidal
shape 215 mm long,200 mm wide with minimum
distances of 37 mm from wall face withconcealed
fittings arrangement of approved quality and
colour, weighing not less than 88 gms
15 17.73 Providing and fixing PTMT towel rail complete
with brackets fixed to
wooden cleats with CP brass screws with
concealed fittings
arrangement of approved quality and colour
16 17.73.1 450 mm long towel rail with total length of 495
mm, 78 mm wide and effective height of 88 mm,
weighing not less than 170 gms
RAJESH Digitally signed by RAJESH
PL-Estimate Page-5 DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
S. No. DSR 2021 Description of Item Unit Qty Rate( Rs) Amount(Rs)
17 17.71 Providing and fixing PTMT liquid soap container
109 mm wide, 125
mm high and 112 mm distance from wall of
standard shape with Each 2 172.63 345.268
18 Providing and fixing vertical storage type hot
water heater fixed to wall with anchor bolts &
nuts, 15mm CP brass angle stop cock and 15mm
CP brass non-return valve complete including
making connections with 15mm dia CP
connecting pipes on inlet and outlet, suitable
length of power cable and 15 amps plug.
18.1 NS-9 Capacity15Litres Venus Model Magma 25GV Each 2 14750.00 29500
19 NS Providing and fixing 15mm C.P brass Sink
MixerJaguar Model. No. FLR-5165 or
approvedequivalent.) for kitchen sink with
swinging spout complete. Including cutting and
making good the walls wherever required . Each 2 5310.00 10620
Providing and Fixing of C.P. Brass Shower set comprising of :
One No. CP brass Single Lever Concealed Diverter
One No. CP brass OH shower head No. OHS-1989 &
RAJESH Digitally signed by RAJESH
PL-Estimate Page-6 DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
S. No. DSR 2021 Description of Item Unit Qty Rate( Rs) Amount(Rs)
One No. CP brass Bath Spou
Including cutting and making good the walls wherever
Shower set as described above.
Total C/F to Summary 266869.508
SOIL, WASTE & VENT AND RAIN WATER PIPES
20 4.1 Providing and laying in position cement concrete
of specified grade excluding the cost of centring
and shuttering. All work up to plinth.
20.1 4.1.3 1:2:4 ( 1cement : 2 Coarse sand : 4 graded stone
aggregate 20 mm nominal size ) Cum 5 8690.88 43454.39
21 DSR-12.22 Making khurras 45x45 cm with average minimum
thickness of 5 cm cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate of 20 mm nominal size) over P.V.C.
sheet 1mx1mx400micron, finished with 12mm
cement plaster 1:3 (1 cement : 3 coarse sand)
and a coat of neat cement, rounding the edges
and making and finishing the outlet complete. Each 4 314.59 1258.35
RAJESH Digitally signed by RAJESH
PL-Estimate Page-7 DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
S. No. DSR 2021 Description of Item Unit Qty Rate( Rs) Amount(Rs)
22.0 DSR-12.44 Providing and fixing to the inlet mouth of rain
water pipe cast iron grating 15 cm diameter and
weighing not less than 440 grams.
Providing and fixing 110 mm dia PVC floor
trap moulded EXTENTION PIECE (Height
NS Riser) having 3 nos. boss inlets suitable for NOS 1 413.00
50 and 40 mm pipe connections, jointing and
dripseal all complete as per standard detail.
Providing and fixing floor drain points
formed out of UPVC 110 X 50 mm dia
NS reducer with suitable extension piece NOS 1 454.30
including cost of cutting and making good
the walls and floors wherever required.
25 Providing and fixing C.P JALI 125 mm X 125
mm square vertical grating fixed in wall /
floor for tarrace rain water outlet, complete
RAJESH Digitally signed by RAJESH
PL-Estimate Page-8 DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
S. No. DSR 2021 Description of Item Unit Qty Rate( Rs) Amount(Rs)
26 Providing, jointing and fixing UPVC Soil,
Waste and Vent pipes of approved make
conforming to IS : 13592 Class B, 6 kg/cm2
pressure including fittings and specials, i.e.
bends, tees, crosses, access pieces,
adaptors for connections to other materials,
plugs, reducers, cowls, offsets, etc.in pipe
NS ducts , sunken floors, under slung from
ceiling and jointing with epoxy based
sealant-`Dripseal`, Pipes may be laid/ fixed
in pipe ducts, sunken floors, under slung
from ceiling. The pipes shall be laid to
27 NS-26 Providing and fixing in position 110x63 mm dia
uPVC reducing elbow including fix to floor with Each 8 178.18 1425.44
28 NS-27 Providing and fixing 100 mm dia GI inlet fitting/
Extension Piece with 2 or 3 inlets of 32 to 50
mmdia, fixed to CI trap with lead joint and set in
cement concrete as per drawing complete.
RAJESH Digitally signed by RAJESH
PL-Estimate Page-9 DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
S. No. DSR 2021 Description of Item Unit Qty Rate( Rs) Amount(Rs)
29 NS-28 Providing and fixing in position 125x125 mm
stainless steel grating for floor trap/floor drain
including fix to floor with cement mortar.
Total C/F to Summary 85269.57
Water Supply System
30 DSR-18.8 Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC) pipes, having thermal stability
for hot & cold water supply, including all CPVC
plain & brass threaded fittings, i/c fixing the pipe
with clamps at 1.00 m spacing. This includes
jointing of pipes & fittings with one step CPVC
solvent cement and the cost of cutting chases
and making good the same including testing of
joints complete as per direction of Engineer in
Concealed work including cutting chases and
making good the walls etc.
30.1 18.8.1 15 mm nominal outer dia .Pipes. Metre 20 520.56 10411.14
30.2 18.8.2 20 mm nominal outer dia .Pipes. Metre 20 606.23 12124.50
31 DSR-18.9 Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC) pipes, having thermal stability
for hot & cold water supply including all CPVC
plain & brass threaded fittings This includes
jointing of pipes & fittings with one step CPVC
RAJESH Digitally signed by RAJESH
PL-Estimate Page-10 DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
S. No. DSR 2021 Description of Item Unit Qty Rate( Rs) Amount(Rs)
Internal work - Exposed on wall
31.1 18.9.1 15 mm dia nominal bore Metre 20 261.19 5223.86
31.2 18.9.2 20 mm dia nominal bore Metre 25 324.80 8119.88
32 DSR-18.17 Providing and fixing gun metal gate valve with
C.I. wheel of approved quality (screwed end) :
32.1 18.17.1A 20 mm dia nominal bore Each 2 543.04 1086.07
32.2 18.17.1 25 mm dia nominal bore Each 2 586.64 1173.27
33 18.48 Providing and placing on terrace (at all floor
levels) polyethylene water
storage tank, IS : 12701 marked, with cover and
suitable locking
arrangement and making necessary holes for
inlet, outlet and overflow
pipes but without fittings and the base support
Total C/F to Summary 43861.72
RAJESH Digitally signed by RAJESH
PL-Estimate Page-11 DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club.
BOQ OF HVAC WORKS
S.No. Description Unit Qty Rate(Rs) Amount ( Rs)
1 HI WALL SPLIT UNITS -
Supply, Installation, testing and commissioning of 3 Star BEE rated Air-
cooled DX type Hi-wall split air conditioners each comprising an outdoor
unit(s) consisting of hermetically sealed Inverter compressor suitable for
operation on 230V, 50Hz, 1 Phase AC supply, air cooled condenser,
condenser fan etc. with outer casing and indoor fan coil unit consisting
of centrifugal fans, fan motor, DX cooling coil, outer casing, filter,
control and power panel with remote etc. entire cabling and wiring from
indoor to outdoor, insulation and with full charge of refrigerant R 410 . -
The indoor and outdoor units shall be with structural steel supports,
angles, rods etc. The quoted price shall also include, refrigerant charging,
supports, Stand , clamps, fittings, connections, sleeves, supports, MCB.
Unit shall be suitable to operate till 52 Deg C ambient temperature.
1.3 2.0 TR Unit Minimum cooling capacity 7000 Watt Nos. 32 61,672.00 19,73,504.00
Supply, Installation, testing and commissioning including vaccumiazation
and Nitrogen testing of following nominal sizes of soft drawn copper
refrigerant piping for Split & Cassette units, complete with fittings, with
suitable adjustable ring type hanger supports, jointing/brazing including
accessories, insulated with 13 mm / 9 mm Class-O closed cell
elastometric nitrile rubber tubular sleeves sections of specified thickness
as given below for Suction and Liquid lines, all accessories as per
specifications etc. as required : Make:Rajco,Mandev,Hindustan..
Complete as required as per site conditions.
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Supply installation, testing and fixing of heavy duty Class’B’ PVC pipes ISI
as per IS 4985-2000,drain piping complete with 6mm thick aluminum
4 laminated XLPE tublar insulation fittings, supports as per - -
Supplying and laying of XLPE insulated Copper conductor armored cables
of 1.1KV grade of following sizes directly on wall/ structural frame/ cable
trays or racks using approved type of clamps, double earthing with GI
strip/ wire of suitable size and hardware all complete as per equipment
specifications, drawings and direction of
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.08.17 11:22:46
Construction of Additional Facilities for Sports
Persons at Jajpur Sports Club
ABSTRACT OF COST FOR - RENOVATION OF EXISTING
SL.N TOTAL AMOUNT
SL.N TOTAL AMOUNT
DESCRIPTION OF WORK
I EARTH WORK 10,220.76
II CONCRETE WORK 86,191.92
III WOOD AND P.V.C. WORK 34,66,919.93
IV FINISHING WORK 5,07,750.22
V WATER PROOFING WORK 15,11,332.20
VI DISMANTLING WORK 87,431.63
I AIR CONDITIONING WORK 33,84,969.57
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR - RENOVATION OF EXISTING BUILDING/WORK
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
I 2.0 EARTH WORK
Earth work in ordinary soil with initial lead and lift including rough
dressing in layers not exceeding 0.3m in depth and the Earth
transported by transport vehicles as directed by the Engineer-in-
Filling in foundation and plinth with filling sand, watered and
rammed including cost of material, labour, royality and
transportation etc. complete as per specifications and as
directed by Engineer-in-charge.
TOTAL EARTH WORK 10220.76
II 4.0 CONCRETE WORK
Cement concrete (1:2:4) with 12mm size hard broken granite
TOTAL CONCRETE WORK 86191.92
VI 9.0 WOOD AND P.V.C. WORK
Providing and fixing factory made single extruded WPC (Wood
Polymer Composite) solid door/window/Ceosetory window s
& other Frames/Chowkhat comprising of virgin PVC polymer of
K value 58-60 (Suspension Grade), calcium carbonate and
natural fibers (wood powder/ rice husk/wheat husk) and non
tox ic additives (maximum toxicity index of 12 for 100 gms)
fabricated with miter jo ints after applying PVC solvent cement
and screwed with full body threaded star headed SS screws
having minimum f rame density of 750 kg/cum, screw
withdrawal strength of 2200 N (Face) & 1100 N (Edge) ,
minimum compressive strength of 58 N/mm2, modulus of elast
icity 900 N/mm2 and resistance to spread of flame of Class A
4 SOR category with property of being termite/borer proof,
water/moisture proof and fire retardant and fixed in position with
M.S hold fast/lugs/SS dash fa steners of required dia and length
complete as per direction of Engineer-In - Charge . (M.S hold
fast/lugs or SS dash fasteners shall be paid for separate ly).
Note: For WPC solid door/window frames , minus 5mm
tolerance in dimensions i.e. depth and width of profile shall be
acceptable . Variation in profile dimensions on plus side shall be
acceptab le but no extra payment on this account shall be made
Supplying, fitting and fixing well dressed and well seasoned sal
wood choukaths framed and fixed including two coats coats of
coaltaring to wall and lintel side faces of choukaths including
cost of coaltar and labour for coaltaring and fixing required nos.
of W.I. clamps to the choukaths with approved qualities of
screws including cost, conveyance, loading required for the metre 20.45 1518.54 31054.18
work etc. complete in all respect with cost, conveyance,
royalties, loading, unloading and taxes of all materials and cost
of all labour, T&P, sundries, scaffolding etc. required for the
work complete in all respect as per specification and direction of
Engineer in Charge
Providing and fixing ISI marked flush door shutters conforming to IS :
2202 (Part I) non-decorative type, core of block board construction
5 SOR with frame of 1st class hard wood and well matched commercial 3 ply
veneering with vertical grains or cross bands and face veneers on
both faces of shutters:
35 mm thick including ISI marked Stainless Steel butt hinges with
necessary screws sqm 7.67 1725.28 13224.26
Extra for providing lipping with 2nd class teak wood battens 25
6 SOR mm minimum depth on all edges of flush door shutters (over all sqm 7.67 407.10 3120.42
area of door shutter to be measured).
Providing and fixing wooden moulded beading to door and
7 SOR window frames with iron screws, plugs and priming coat on
unexposed surface etc. complete :
2nd class teak wood
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR - RENOVATION OF EXISTING BUILDING/WORK
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Providing 40x5 mm flat iron hold fast 40 cm long including fixing
to frame with 10 mm diameter bolts, nuts and wooden plugs and
8 SOR embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 each 48.00 132.75 6372.00
cement : 3 coarse sand : 6 graded stone aggregate 20mm
9 MR SS Tower Bolt 12'' each 8.00 801.22 6409.76
dormakaba BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size
10 MR 4" x 3" x 3mm, in SS 304 and in SSS finish. Suitable for door each 16.00 368.16 5890.56
weights upto 120kgs. Template Drilled
dormakabakaba ML 550S Digital Mortise lock in standard
design accessible by Fingerprint (100 nos.), RFID (100 Nos.),
PIN (4 Nos.), BLE (10 mobiles), Mechanical Keys (3 nos.).
Emergency Power: external 9VDC alkaline battery. Mortise lock
in Black with Bright Chrome Rim finish. Remote Control
dormakaba floor stop half dome with 45mm dia with fixing
accessories, in satin Chrome
Providing and fixing aluminium die cast body tubular type
universal hydraulic door closer (having brand logo with ISI, IS :
13 SOR 3564, embossed on the body, door weight upto 35 kg and door each 4.00 982.11 3928.46
width upto 700 mm), with necessary accessories and screws
Providing & Fixing decorative high pressure laminated sheet of
plain / wood grain in gloss / matt/ suede finish with high density
14 SOR protective surface layer and reverse side of adhesive bonding
quality conforming to IS : 2046 Type S, including cost of
adhesive of approved quality.
LAMINATE PANELING: P/F of wooden Sound proof
paneling made using frame work of Gyproc make
Standard floor / Stud sections 2’ C/C fixed to walls using
standard PVC sleeves / screw, to be covered with 12 MM
15 MR ply (make ………), space between wall and ply to be filled sqm 408.00 7796.26 3180874.08
with glass wool 3’th in fiber mesh. Facia to be covered with
1 mm laminate (make…….) as per drawing and design.
Rates to be inclusive of all material, labor, wastage
hardware T&P etc.
TOTAL WOOD AND P.V.C. WORK 3466919.93
X 13.0 FINISHING WORK
16 SOR 12mm thick cement plaster (1:6) on brick work. sqm 50.00 164.96 8248.20
17 SOR 16mm thick cement plaster (1:6) over brick or stone masonry. sqm 100.00 235.88 23588.20
6 mm thick cement plaster (1:4) to R CC surfaces finished
18 SOR smooth including closed deep chiping and slury treatment. Per 1 sqm 50.00 185.26 9263.00
Providing and applying plaster of paris putty of 2 mm thickness
19 SOR over plastered surface to prepare the surface even and smooth sqm 50.00 288.87 14443.26
Finishing walls with textured exterior paint of required shade
:New work (Two or more coats applied @ 3.28 ltr/10 sqm) over
20 SOR and including priming coat of exterior primer applied @ sqm 1800.00 241.55 434782.80
Painting two coats to the wall surface by using 100% premium
Acrylic emulsion paint to interior wall surface over a coat of
primer with water bond cement primer after preparing the
21 SOR surface smooth by applying putty punning with Synthetic Acrylic sqm 100.00 92.14 9213.52
wall putty including finishing the surface smooth by sand
papering in all heights etc. complete in all respect.
Applying priming coats with primer of approved brand and
manufacture, having low VOC (Volatile Organic Compound )
22 13.85 content. With ready mixed pink or grey primer on wood work sqm 100.00 82.11 8211.24
(hard and soft wood) having VOC content less than 50 grams/
TOTAL FINISHING WORK 507750.22
XIII 22.0 WATER PROOFING WORK
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR - RENOVATION OF EXISTING BUILDING/WORK
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Providing and laying integral cement based water proofing
treatment including preparation of surface as required for
treatment of roofs, balconies, terraces etc consisting of following
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of
cement admixed with water proofing compound conforming to
IS. 2645 and approved by Engineer-in-charge over the RCC
slab including adjoining walls upto 300 mm height including
cleaning the surface before treatment.With average thickness of
120 mm and minimum thickness at khurra as 65 mm.
(b) Laying brick bats with mortar using broken bricks/brick bats
25 mm to 115 mm size with 50% of cement mortar 1:5 (1
cement : 5 coarse sand) admixed with water proofing compound
conforming to IS : 2645 and approved by Engineer-in-charge
over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5
coarse sand ) admixed with water proofing compound
conforming to IS : 2645 and approved by Engineer-in-charge to
required slope and treating similarly the adjoining walls upto 300
mm height including rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of
cement slurry using 2.75 kg/ sqm of cement admixed with water
proofing compound conforming to IS : 2645 and approved by
Engineerin- charge.
(d) Finishing the surface with 20 mm thick jointless cement
mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water
proofing compound conforming to IS : 2645 and approved by
Engineerin- charge including laying glass fibre cloth of approved
quality in top layer of plaster and finally finishing the surface with
trowel with neat cement slurry and making pattern of 300x300
mm square 3 mm deep.
TOTAL WATER terrace so finished
PROOFING WORKshall be flooded with water for 1511332.20
XIV 15.0 DISMANTLING WORK
A DISMANTLING WORKS
24 15.2 Demolishing cement concrete manually/ by
mechanical means including disposal of material
within 50 metres lead as per direction of Engineer -
15.2.1 Nominal concrete 1:3:6 or richer mix (i/c Cum
equivalent design mix) 25.00 1053.39 26334.65
25 15.7 Demolishing brick work manually/ by mechanical
means including stacking of serviceable material
and disposal of unserviceable material within 50
metres lead as per direction of Engineer-in-charge.
15.7.4 In cement mortar Cum 50.00 889.84 44491.90
26 15.12 Dismantling doors, windows and clerestory
windows (steel or wood) shutter including
chowkhats, architrave, holdfasts etc. complete and
stacking within 50 metres lead :
15.12.1 Of area 3 sq. metres and below No. 10.00 166.68 1666.75
27 15.13 Taking out doors, windows and clerestory window
shutters (steel or wood) including stacking within
50 metres lead:
15.13.1 Of area 3 sq. metres and below No. 10.00 64.66 646.64
28 15.23 Dismantling tile work in floors and roofs laid in
cement mortar including stacking material within
50 metres lead.
15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 10.00 33.28 332.76
29 15.42 Dismantling C.I. or asbestos rain water pipe with
fittings and clamps including stacking the material
within 50 metres lead :
Construction of Additional Facilities for Sports Persons at Jajpur Sports Club
DETAILED BOQ FOR - RENOVATION OF EXISTING BUILDING/WORK
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
30 15.44 Dismantling G.I. pipes (external work) including
excavation and refilling trenches after taking out
the pipes, manually/ by mechanical means
including stacking of pipes within 50 metres lead
as per direction of Engineer-in-charge :
32 15.45 Dismantling C.I. pipes including excavation and
refilling trenches after taking out the pipes,
manually/ by mechanical means breaking lead
caulked joints, melting of lead and making into
blocks including stacking of pipes & lead at site
within 50 metre lead as per direction of Engineer-in-
33 15.52 Dismantling of flushing cistern of all types No.
(C.I./PVC/Vitrious China) including stacking of
useful materials near the site and disposal of
unserviceable materials within 50 metres lead. 5.00 418.25 2091.26
34 15.56 Dismantling old plaster or skirting raking out joints Sqm
and cleaning the surface for plaster including
disposal of rubbish to the dumping ground within
35 15.60 Disposal of building rubbish / malba / similar Cum
unserviceable, dismantled or waste materials by
mechanical means including loading, transporting,
unloading to approved municipal dumping ground
or as approved by Engineer-in-charge, beyond 50
m initial lead, for all loads including all lifts
TOTAL DISMANTLING WORK 87431.63
BOQ:- HVAC WORKS
S.No. Description Unit Qty Rate
1 HI WALL SPLIT UNITS -
Supply, Installation, testing and commissioning of 3 Star BEE rated
Air-cooled DX type Hi-wall split air conditioners each comprising an
outdoor unit(s) consisting of hermetically sealed Inverter
compressor suitable for operation on 230V, 50Hz, 1 Phase AC
supply, air cooled condenser, condenser fan etc. with outer
casing and indoor fan coil unit consisting of centrifugal fans, fan
motor, DX cooling coil, outer casing, filter, control and power panel
with remote etc. entire cabling and wiring from indoor to outdoor, -
insulation and with full charge of refrigerant R 410 . The indoor and
outdoor units shall be with structural steel supports, angles, rods
etc. The quoted price shall also include, refrigerant charging,
supports, Stand , clamps, fittings, connections, sleeves, supports,
MCB. Unit shall be suitable to operate till 52 Deg C ambient
temperature. Make - Hitachi
1.1 2.0 TR Unit Minimum cooling capacity 7000 Watt Nos. 35 61,672.00 21,58,520.00
Supply, Installation, testing and commissioning including
vaccumiazation and Nitrogen testing of following nominal sizes of
soft drawn copper refrigerant piping for Split & Cassette units,
complete with fittings, with suitable adjustable ring type hanger
supports, jointing/brazing including accessories, insulated with 13
2 mm / 9 mm Class-O closed cell elastometric nitrile rubber tubular -
sleeves sections of specified thickness as given below for Suction
and Liquid lines, all accessories as per specifications etc. as
required : Make:Rajco,Mandev,Hindustan.. Complete as required
as per site conditions.
Supply installation, testing and fixing of heavy duty Class’B’ PVC
pipes ISI as per IS 4985-2000,drain piping complete with 6mm
3 thick aluminum laminated XLPE tublar insulation fittings, supports - -
Supplying and laying of XLPE insulated Copper conductor armored
cables of 1.1KV grade of following sizes directly on wall/ structural
frame/ cable trays or racks using approved type of clamps, double
earthing with GI strip/ wire of suitable size and hardware all
complete as per equipment specifications, drawings and direction
Total ( INR ) 3384969.574
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT_33.pdf
Tender Document
BOQ_33.pdf
Tender Document
Tender drawing_33.pdf
Tender Document
Integrity Pact_33.pdf
Tender Document
Scope of work_33.pdf
Tender Document
Physical Milestone_33.pdf
Tender Document
GCCContracting 2019 with 9 amendments.pdf
Tender Document
GCC Amendments 10 to 16.pdf
Tender Document
Unconditional Acceptance_33.pdf
Tender Document
Instruction to Bidder for online Bid Submission _33.pdf
Tender Document
Soil Report.pdf
Tender Document
Revised approved makes.pdf
Tender Document
Revised Technical Specifications.pdf
Tender Document
corrigendum-959-Notice_33.pdf
pdf • 0.27 MB
corrigendum-948-Notice_33.pdf
pdf • 0.27 MB
addendum-725bb43b35eb-Corrigendum_02_33.pdf
pdf • 0.51 MB
addendum-1adf2491ed9e-Corrigendum_01_33.pdf
pdf • 0.51 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .