Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.6 LAccepted-AOC | L1 | Accepted-AOC DUE TO L1 RATE | |
| 2 | L2₹25.9 L+₹1.9 L (7.75%)Rejected-Finance PO LEKHAPANI DIST TINSUKIA PIN 786 180 ASSAM | 786180 | L2 | Rejected-Finance DUE TO HIGHER RATE | |
| 3 | L3₹29.7 L+₹5.6 L (23.4%)Rejected-Finance | L3 | Rejected-Finance DUE TO HIGHER RATE | |
| 4 | L4₹30.3 L+₹6.2 L (25.8%)Rejected-Finance 0 VILLAGE SYANGAWALI TEH TEHSIL SADULSAHAR SRIGANGANAGAR SRIGANGANAGAR RAJASTHAN 335001 | GANGANAGAR | RAJASTHAN | 335001 | L4 | Rejected-Finance DUE TO HIGHER RATE |
Tender Value
₹24 L
EMD Value
₹48,000
Closing Date
3 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE LEKHAPANI
TINSUKIA, ASSAM
SPECIAL REPAIRS TO BLDG NO T-14 (OTM) OF 5/1 GR AT LEKHAPANI MIL STN
2022_MES_543797_1
8679/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE LEKHAPANI
Class E and category a (i)
4 documents required · 4 mandatory
₹500
GE LEKHAPANI
₹48,000
Yes
24 Sept 2022
6 Aug 2022
10 Sept 2022
6 Aug 2022
3 Sept 2022
20 Aug 2022
Amount
Dismantling of plain or corrugated steel sheeting any guage, thickness including nanital or similar pattern roof coverings complete all as specified and as directed by Eng-in-charge.
Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including frames and cover fillets complete all as specified and directed.
Taking down roof trusses, coupled rafters or trussed beams of clear span above 4 mtrs and upto 8 mtrs complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
Dismantling timber scantlings in unframed timber work 40 sq.cm and over in section, in any position complete all as specified and as directed.
Dismantling timber fillets, rails, posts, rafters, purlins, etc in unframed work under 40 Sqcm in section in any posotion complete all as specified and directed.
Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work & precast concrete articles complete all as specified and directed.
Demolition of reinforced cement contrete of any description in any position not otherwise specifically provided for and removing debris beyond the premises complete all as specified and directed.
Taking down chowkat or frame with shutters (without taking off shutters from the frame) not exceeding 1.5 sqm each and making good to disturbed surfaces complete all as specified and as directed by the Engineer-in-Charge.
Taking down chowkat or frame with shutters (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4.0sqm each and making good to disturbed surfaces complete all as specified and directed by the Engineer-in-Charge.
M&L for pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed
M&L for hot dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550MPa as in ridge/valley/gutter/eaves boardings fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.
S&F Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605mm x 605mm in true horizonatal level, hot dipped galvanised steel sections consisting of main “T” runner with suitably spaced joints to get required length and size 24mm x 38mm made from 0.30mm thick (Min) sheet spaced at 1200mm centre to centre and cross “T” of size 24mm x 28mm made of 0.30mm thick (Min) sheet, 1200mm long spaced between main “T” at 600mm centre to centre to form a grid of 1200mm x 600mm and secondary cross “T” of length 600mm and size 24mm x 28mm made of 0.30mm thick (Min) sheet to be interlocked at middle of the 1200mm x 600mm panel to form grids of 600mm x 600mm and wall angle of size 24mm x 24mm x 0.4mm. Main “T” runner to be suspended from purlins or truss member using 2 to 3 mm dia GI wire, 1200mm x 600mm centre to centre all complete for all heights as per manufacturers instructions and as directed by Engineer – in - Charge.
M & L for 4 mm thick high pressure, oceanic pre-primed, self embossed, non asbestos fibre cement decorative board, water, termite and fire resistant for insulation ad acoustic purpose to be placed in grid system hold down clips with provision of high fixtures, air conditioning, diffuser and ducts, sprinkler, smoke detector etc, complete all as per manufacturer instructions and as directed by Engineer – in - Charge
S&F Mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment cofirming to Fe 410 -W (Gde- E- 250) quality-A complete all as specified and directed.
S & F Mild steel bolts with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long and diameter exc 12 n.exc 20 complete all as specified and directed.
Fixing only roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Note : Item obtained from dismantling shall be reused after cleaning the rusted surfaces cut to size and fabricated as per site requirement complete all as specified and as directed by Engr-in-charge.
S&F Rolled mild steel sections conforming to Fe 410 (GdeE250 ) quality A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and directed.
S&F Mild Steel work in tubular Column (square/rectangular/circular) hollow section including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161 grade YST 310 complete all as specified and directed.
S&F Mild Steel work in tubular trusses (square/rectangular/circular) hollow section including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 4923 grade YST 310 complete all as specified and directed.
M&L for preparation of old painted surfaces of steel of any description, not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of new or previously steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L PCC (1:2:4), type B1, (using 20mm graded crushed stone aggregates) as in bed block, blocks for holdfasts, coping , benching slightly rounded or chamfered angles & throating etc including necessary use and waste of form work complete all as specified and directed.
M&L Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m radius built in CM (1:4) complete all as specified and directed.
M&L Brick work with sub class old size 'B' bricks, straight or curved on plan to any radius, built in CM (1:4 ) as in half brick thick walls complete as specified and directed.
Form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed.
From work to chajjas and similar items including edges for rough finished flat surfaces of concrete etc.complete all as specified and directed.
M&L Providing M-25 (Design Mix) (using 20mm graded stone aggregate) as in beams, cantilevers beressummers lintels over 1.5 m length and the like etc complete all as specified and directed.
M&L Providing M-25 (Design Mix) (using 20mm graded stone aggregate) as in chajjas complete all as specified and directed.
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S&F Mild steel TMT bars 6mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and directed.
All as per Item No.32 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacrs and binders,etc complete all as specified and directed.
M&L Rendering 15mm thick in CM (1:4) on fair faces of brick or concrete surfaces in two layers 5mm thick finishing layer over 10mm thick backing layer finished fair and even with mixing water proofing compound to top layer as per manufacturers instruction and as directed (WPC will be measured separetely).
Supply only Integral water proofing compound of approval brand complete all as specified and directed.
M&L Preparation of new plastered surfaces of wall and preparing surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L Rendering 10.mm thick plaster in CM (1:6) on fair faces of brick work or concrete surfaces including finishing top even and smooth without using extra cement complete all as specified and directed.
M&L Preparation of new plastered surfaces of wall and preparing surfaces as directed by applying thin layer of wall care putty of 1 to 2 mm thick and finally applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.
M&L Rendering 10 mm thick in CM (1:4) on concrete surfaces in ceiling, finished even and smooth without using extra cement complete all as specified and directed.
S&F Pressed steel frames (125 x 60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed,complete all as specified and directed.
M&L PCC (1:3:6), type C-1, (using 20mm graded crushed stone aggregates) as in bed block, blocks for holdfasts, filling in pressed steel door frames , benching slightly rounded or chamfered angles & throating etc including necessary use and waste of form work complete all as specified and directed.
S&F 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides & both face is covered with decorative face veneer with lipping / frame to match & fixed to chowkats complete all as specified and directed.
S&F 35 mm thick, hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed.
S&F Galvanised steel wire cloth. 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with steel wire staples complete all as specified and directed.
S&F 200 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed complete all as specified and as directed.
S&F 150mm size aluminium handles, cast type, anodized and fixed complete all as specified and as directed.
S&F 300mm length of bolt, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified & as directed.
M&L for preparing new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S & F for aluminum powder coated (poder coated of required colour) three track sliding windows frame top & sides of size 92 x 31.75 x 1.50mm (section No 20831) bottom of size 92 x 31.72 x 1.50mm (Soction of 20832) and shutter top & bottom of size 40 x 18 x 1.55 (section 20738) and lock side shutter frame of size 40 x 15 x 1.45mm (Section 20737) with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc complete all as specified
S&F Framed work such as griils, grating, angle iron door frames etc., with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, laders, framed balusters, walk ways, railings frame work of water tanks and similar work conforming to Fe-290. Gde E-165 complete all as specified and as directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. including brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and directed.
M&L for coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete all as specified and directed.
M&L for coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm as in vertical surfaces such as skirting etc, and set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat CM (1:4) complete all as specified and directed.
Demolition of unreinforced cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for 75 mm thick PCC (1:3:6) type C-2, (using 40 mm graded stone aggregates) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with hot bitumastic mix in proportion of bitumen and sand (1:2) complete all as specified and directed.
Taking down copper/aluminium point wiring, (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as directed by Eng-in-charge.
M & L for surface point wiring complete with 2x1.5 sq mm FRLSH, PVC insulated multi stranded copper conductor single core cable 1100 volts grade (Red/Yellow/Blue colour), drawn into and including non metalic PVC Casing/caping medium grade of suitable size and fixing accessories, fixed on wall/ roof etc, and including provn of PVC insulated 1.5 sq mm FRLSH (Green colour) copper conductor for earth continuity and connected to common earth dolly in and including PVC switch box of suitable size for fixing switches/sockets/regulators,etc for one light point controled by one one way 5 Amp switch complete all as specified and directed by Engineer-in-Charge. Note :- Cost of PVC casing/caping, making good disturbed wall surfaces, matching with existing shade/pink of the painted surface are deemed to be included in the quoted rate.
All as per Item No.58 above but one fan point controlled by one , one way 5 Amp switch complete all as specified and directed.
All as per Item No.58 above but one 5 pin socket outlet 05 Amp on independent board complete all as specified and directed.
All as per Item No.58 above but one 5 pin socket outlet 05 Amp on same board with other switches complete all as specified and directed.
All as per item No 58 above, but one 15 Amps socket outlet but copper conductor with 2.5 sq mm, PVC insulated single core cable all as specified and directed.
S&F LED tube light fitting 4 ft. 1 x 18 watt with 230 volts, with bipin holder connector block, LED retrofit tube rod etc complete with all accessories internally pre-wired and fixed to walls/ceiling with screw on round PVC blocks including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
S&F Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
S&F Fan regulators electronic stepped type complete all as specified and directed.
S&F Switch piano flush type, 6 amps, 230V AC,single pole, one way,complete all as specified and directed.
S&F Switch socket combination multipurpose suitable for 2 pin and 3 pin 6 amp flush type complete all as specified and directed.
S&F Switch socket combination multipurpose suitable for 2 in 1 , 3 pin 5 & 15 amps flush type complete all as specified and directed.
S&F Socket outlet type 2 in 1 3/5 pin 5 Amps with other switches.complete all as specified and directed.
S&F Ceiling rose, 3 terminals, surface bakelite, PVC/Polycarbonate as specified and directed.
M & L Sub main wiring complete with 2 runs of 6 sq mm, FRLSH single core, PVC insulated, unsheathed cable,1100 volts grade,multi standard with copper conductor drawn through and including PVC casing/caping of size not less than 20mm medium grade and fixed on wall / roof etc., with one run of PVC insulated 6 sq mm FRLSH multi-stranded copper conductor for earth continuity conductor including taking down old unserviceable wiring all as specified and directed. Note :- Three runs of 6 sqmm copper cable one run of casing/caping shall be measured as one unit length.
S & F MCB SP 6 to 32 Amps 240 voltscomplete all as specified and directed.
S & F MCB SPN 6 Amps to 32 Amps 240 volts complete all as specified and directed.
S&F Single pole and neutral DB wall mounting type,240 Volts, 8 Way with 200 Amps rated bus bar,double door suitable for fixing MCB's including connecting etc and taking down un serviceable DB ,main switch complete all as specified and directed.
M&L Earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe (light grade) for earth lead protection pipe for suitable length and GI pipe 20 mm dia (light grade) for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover by using (1 : 2 : 4) type B1(using 20 mm graded stone aggregate) with 3 Nos 8 mm dia TMT bars both ways,etc and testing on completion complete all as specified and directed by Engineer-in-Charge.
S&F LED bldg security light fitting 48W watt with 230 Volts with IP 66, high Impact resistance complete, internally pre-wired and mounted on and including GI pipe bracket of suitable size and length with MS flat 40x3mm clamps made to shape and drilling holes, fixing on wall with suitable size nuts/bolts/washers complete all as specified and directed.
Supply,laying and testing of cable XLPE Insulated screened PVC bedded galvanized steel strip or wire armored electric power cables(heavy duty) 1100 Volts grade with stranded aluminium conductor of size 2 core,16 sq mm laying in trenches/floors/wall complete all as specified and directed.
Excavation in trenches in soft/loose soil not exceeding 1.5 Mtr wide and not exc 1.5M depth for taking out / laying of UG cables and getting out all as specified and directed.
Returning, filling, including spreading, levelling, watering and well ramming in layers not exc 25cms thick of soil complete all as specified and directed.
Removing the surplus excavated materisl/soil to a distance not exc 50Mtrs and depositing, where directed at a level not exceeding 1.5 Mtr above the starting point all as specified and directed.
Supply and spread river sand in trenches as cable cushioning 8 cm below the cables and 15cm above the cable all as specified and directed. Note: Punned thickness shall be measured for payment purpose.
Supply and lay burnt bricks sub class 'B' standard size laid across the cable in trenches as protection to the cable all as specified and directed.
Supply and laying 40 mm dia GI tubing (light grade) with all fittings (ISI Marked) laying in trenches/fixed on pole/wall complete including taking down old unserviceable GI pipe complete all as specified and directed.
Taking down fan, sealing cable end,dismantling blades and removing fan and blades to store complete all as directed by Eng-in-charge.
M&L Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.complete all as specified and directed.
Hanging only ceiling fan (M.D.supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as directed by Eng-in-charge.
S & F Fan hooks made of MS clamp deformed to proper shape including nut & bolts and drilling/cutting roof as required at site and fixing fan hook with existing steel reinforcement all as directed by engr-in-charge.
RIA CONSTRUCTION
FREEZCON
M/s. R. K. Trading Company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .