PROVISION OF OTM ACCOMMODATION FOR 11 LU AF AT VAYUSENA NAGAR NAGPUR

Amount

Blank

Blank

Blank

Blank

Blank

Blank

Blank

Blank

Blank

Blank

Blank

SCH 'A' PART XIV (MISC B/R & E/M ITEMS) Note:- Excavation and earthwork to the extent required for execution of relevant item under this schedule unless otherwise specified shall be measured and paid under relevant items of Schedule 'A' Part-II.

INTERNAL ELECTRIFICATION

Material and labour for point wiring (concealed) in and including rigid non metallic PVC heavy duty conduit, 20 mm dia/suitable size as per site requirement including cutting chases for conduits sinking for boxes for concealed conduit wiring, with 1.5 sq mm FRLS PVC insulated unsheathed multi stranded copper conductor cable, with flush type metal boxes modular type of suitable for fixing of modular switches, sockets, fan regulator etc including modular cover plates and frame (inner and outer plates) with white or any coloured cover plate with brass screw cup washer and including PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm as an earth wire connected to common earth and earth dolly as per IS specification and complete all as specified and directed for the following:- (a) One light point controlled by one switch.

(b) One light point controlled by 2- two way switches.

(c) One 3 pin 6 amps switch socket outlet point on same board.

(d) One 3 pin 6 amps switch socket outlet point on independent board.

(e) One bell / buzzer point controlled by one push button on the same board with other switches.

All as per item No 14.001 hereinbefore but for socket outlet 3 pin 15 Amps on independent board with FRLS grade PVC insulated unsheathed multi stranded copper conductor cable size of 2.5 sqmm and PVC insulated unsheathed multi stranded copper conductor earth continuity conductor cable of size 2.5 sqmm, complete all as specified and as directed.

Supply and fixing modular telephone socket, 1 module complete all as specified and as directed.

Supply and fixing modular TV socket, 1 module complete all as specified and as directed.

Supply and fixing high efficacy integrated LED batten box type with and including suspended mounting suitable and including 2 x 20 watt LED T8 tube lights having minimum system efficacy of 100 lumen / W. The luminaire shall have a rated system lifetime of 40,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI>83. The luminaire shall meet IP20 rating with THD<10% and PF>0.95 complete all as specified and as directed.

Supply and fixing wall mounting fan 400mm sweep, 230 volt, AC, including fixing bracket, screws and connecting up with three core flexible copper conductor cable of size 1.5 Sqmm 3 core complete all as specified and as directed.

Supply and fixing sheet metal enclosure for VTPN distribution board when MCCB 125 Apms as incomer and MCB's as outgoing to be used, 4 way, triple pole and neutral, 415 volts, IP 43 protection, double door type 200 Amps rated bus bar with metal door and including MCCB 125 Amps 15 KA breaking capacity as incomer and suitable for MCB SPN and SP as outgoing including making connection complete all as specified and as directed.

Material and labour for submain wiring (concealed) complete with two runs of 6 Sqmm FRLS insulated unsheathed stranded copper conductor cable drawn through in and including heavy duty PVC conduit not less than 20mm dia / suitable size as per site requirment and conduit accessories including single run of 6 Sqmm FRLS insulated unsheathed stranded copper earth cable connected to common earth dolly complete and including cutting chasing in wall for concealed wiring using machine cutting and making good the disturbed surfaces complete all as specified and as directed. Note:- Three run of 6 Sqmm PVC copper conductor cable and one run of PVC conduit shall be measured as single run.

Material and labour for submain wiring (concealed) completewith two runs of 4 Sqmm FRLS insulated unsheathed stranded copper conductor cable drawn through in and including heavy duty PVC conduit not less than 20mm dia / suitable size as per site requirment and conduit accessories including single run of 4 Sqmm FRLS insulated unsheathed stranded copper earth cable connected to common earth dolly complete and including cutting chasing in wall for concealed wiring using machine cutting and making good the disturbed surfaces complete all as specified and as directed. Note:- Three run of 4 Sqmm PVC copper conductor cable and one run of PVC conduit shall be measured as single run.

Material and labour for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4 mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm bore light grade protection pipe for earth lead complete with charcoal and common salt in alternate layer including watering arrangement with galvanized iron pipe light grade 20mm dia perforated at bottom 1.75mtr long placed on top edge of earth plate, PCC Chamber in PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate and 40mm thick RCC cover in RCC 1:2:4 type B0 using 12.5 mm graded stone aggregate reinforced with XPM (weight not less than 4 Kgs/Sqm) and frame of angle iron 25mm X 25mm X 3mm with lugs 2 Nos and 6mm dia MS bar handle made to shape, test point made out of phosphorus bronze with fixing arrangements, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion complete all as specified and as directed. Note :- GI earth wire and 15 mm bore GI protection pipe upto 7.5 mtr from earth plate shall be deemed to be included in rate quoted.

INTERNAL WATER SUPPLY

Supply and fixing CP Shower rose, fancy type, 125mm size, swivel type, fixing with arm, screwed down for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fixing CP Towel rail, 600mm long, both end cleats fixed chromium plated brass screws, complete all as specified and as directed.

Supply and fixing CP Towel ring, fixed with and including chormium plated brass screws, complete all as specified and as directed.

Supply and fixing CP Urinal spreader fixed with 15mm dia pipe, complete all as specified and as directed.

EXTERNAL WATER SUPPLY

Material and labour for cutting of existing 100mm DI pipe and inserting CI Tee of 100 x 80mm joints complete for delivery and side including necessary nuts, bolts, reducer / tee / joint / union / rubber etc complete all as specified and as directed.

Supply and fix new sluice valve PN 1.0 type, flanged and drilled ends complete, ISI marked, including jointing material such as rubber gasket, bolts, nuts etc suitable for size 100mm complete all as specified and as directed.

EXTERNAL ELECTRIC SUPPLY

Supply and installation LT Electric control panel, cubical type, for out door use floor mounted made out of CRCA outer sheet of 3.5 mm thick and inner sheet of 2 mm thick and angle iron legs of size 50mmx50mmx5mm having front and rear open hinged doors with front openable shutters for each MCCB with spreader with fully enclosed bus bar chamber, having insulated bus bar made but of aluminium strips of rating 200 amps for 3 phase, 415 volts, 50 C/S 4 wire system, with cable entry provision, with suitable lugs gland, voltmeter , Ammeter,CTs and phase indicator complete, duly painted with two coats of stove enameled powder coated paint over a coat of red oxide primer complete and nut,bolt,washers for connection of cable, including necessary PCC work of height 45 cm from ground level and white washing to the platform all as specified and equipped with the following items :- (Note: Panel shall be CPRI approved manufacturer)

Supply, Installation, Testing and Commissioning of Integral LED street light luminarie 45 Watt, die cast aluminium housing designed to act as heat sink for efficient dissipation of heat, elecrochemically brightened and anodized aluminium reflector, heat resistant toughened glass provided with die cast aluminium frame, (IK 08) luminarie provided with a mounting bracket for aiming adjustment, driver provided with input voltage surge (10kV), open and short circuit protection, system wattage 45 W and power factor 0.90 complete all as specified and as directed.

Supply, Installation, Testing and Commissioning of Integral LED Ground mounted Bollard 10W, Inverted pyramid tripod LED bollard with soft 360 degree light with a system lumen output of 300 lumens and a minimum system efficency of 30 lm/W, the luminaire having a rated system lifetime of 25,000 burning hours at L70, the luminare having a color temperature of 3000K and CRI>75, the luminaire shall meeting IP65 & IK10 rating with THD < 20% and PF > 0.9, the luminaire housing made of pressure die cast aluminium with polycarbonate diffuser, the power consumption not to exceed 10W(including driver) complete all as specified and as directed.

Supply and fixing gate light, LED type 25 Watt IP 65, energy saving aesthetically designed with symmetrical light distribution spun aluminium with high power LEDs complete all as specified and as directed.

Supply and fixing thermoplastic cable junction boxes IP 66 "halogen free and weather proof" for outdoor Installation with metric knockout for cable entry of size130 x180x77mm fixing on pole with MS clamps, nut bolts, washers and glands suitable for 10 Sq mm 02 core cable with cable terminal block complete all as specified and as directed.

Material and labour for providing cast iron oval shaped HT/ LT cable route indicator of size 130 mm x 100 mm x 6mm thick with letters embossed and fixed with 500 mm long MS angle iron 25mm x 25mm x 5mm including connected earth work and excavation as in post holes in any type of soil providing PCC 1:3:6 type C1 of size 660mm x 300mm x 250 mm (using 20mm graded stone aggregate) to hold the angle iron (by putting the split end of angle iron in to the concrete ) up to ground level and painting the exposed iron surface with grey colour over a coat of primer etc complete all as specified and as directed.

Supply and fixing MCCB, 4pole, 125 Amps , rupturing capacity 25 KA magnetic thermal release with enclosure complete all as specified and as directed.

Material & Labour for earthing complete with GI mild steel earth plate electrode 600mm X 600mm X 6 mm thick, burried directly in ground veritcally (Earth pit not less than 2.25 metre deep below ground level) with top edge of the earth plate not less than 1.5 metres below normal ground level, the earth electrode surrounded by adequate quantity of charcoal and salt to a packed thickness of 15 cm on all sides and earth plate connected to GI strip of size 25 x 4 mm by means of bolts, nuts, check nuts and washers of steel and riveted to earth plate at one end and connected to metallic bodies of equipment etc. at other end, earth strip encased in and

including 40mm bore GI light grade pipe with all fitting from top of electrode to the body of equipment fixed with and including 25 x 4mm flat iron clamps, bolts, nuts and washer and also including GI pipe 20 mm medium grade for watering from bottom of earth pit to top of electrode including GI funnel with wire mesh all as shown in electrical plate No. 3 including PCC pit (1:3:6) type C1 in cement concrete 40mm thick precast RCC cover in (1:2:4) type B1 reinforced with 8mm dia TMT bars @ 75 c/c both ways with 01 No lifting handle of 12mm dia MS plain bar, etc. complete all as specified and as directed. NOTE : Quantity of GI strip & protection pipe upto 7.5mtrs length shall be deemed to be included in the quoted rate.

Material and Labour for cutting of PCC/Hard standing/WBM road not exceeding 20 cm in width not exceeding 30 cm in depth for passing of LT cable and making good of disturbed surface to match with the existing surfaces by using old and new material i.e. bitumen/PCC (1:3:6) type C-1 complete all as specified and directed .

AIR CONDITIONING

Supply & fixing sheet metal enclosures for DB V-TPN for incorporating MCCB upto 160 Amp as incoming & MCBs, TP, 4 way as outgoing, IP-54 with metal double door with 200 amps rated busbar, 415 volts, as per IS-8623 complete all as specified and directed.

Supply & fixing MCCB TPN, 63 Amps, breaking capacity 16 KA confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 415 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs complete all as specified and directed.

Supply & fixing MCB SP 32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs complete all as specified and directed.

Material and labour for providing MCB blanking plate complete all as specified & as directed.

Supply and install invertor based split AC of capacity 1.5 TON (Copper coil) electric driven single phase, 230 volts, 5 star rating including all accessories like brackets, rubber tubing, copper tubing as required at site, gas charging, with auto filter clean technology etc including testing and commissioning as per norms of BEE and making good to the disturbed surface to match the existing surface complete all as specified and as directed. Notes :- (i) All cooling /condensing coil shall be made of copper material. (ii) Copper tubing required if extra is included in the quoted rate. No extra payment will be allowed for extra piping.

Supply and install invertor based split AC of capacity 1.0 TON (Copper coil) electric driven single phase, 230 volts, 5 star rating including all accessories like brackets, rubber tubing, copper tubing as required at site, gas charging, with auto filter clean technology etc including testing and commissioning as per norms of BEE and making good to the disturbed surface to match the existing surface complete all as specified and as directed. Note :- (i) All cooling /condensing coil shall be made of copper material. (ii) Copper tubing required if extra is included in the quoted rate. No extra payment will be allowed for extra piping.

Supply and install digital type voltage stablizer automatic operation single phase naturally air cooled indoor type & designed for input variation between 130 Volt to 300 Volt with output voltage stablized at 230 Volt with accuracy of (+/-)2.5 percent of capacity 4KVA for split AC of 1.5 TON complete all as specified and as directed.

Supply and fixing power unit for AC sheet metal enclosure with socket & plug top and MCB, single pole and enclosure with a two pin and earth plug socket complete with single pole MCB of 20 Apms, 240 volts complete all as specified and as directed.

Supply and fixing PVC rigid conduit pipe 20/25 mm dia including all accessories and necessary saddles with fixing screws, gutties etc.for drain out waters complete all as specified and as directed.

Supply and fixing split AC stand of outdoor unit suitable for 1.0/ 1.5 ton including necessary fixing arrangement complete all as specified and as directed.

SPECIAL ITEMS FOR VEHICAL WASHING EQUIPMENT

Supply and fixing washing equipment having specifications, discharge -26.3 lpm, delivery per gun-11.5 lpm, No of plungers-01, operating pressure-22 Kgf/cm2, 3 Hp motor, pump speed-350 rpm, type of monting base/tank, single phase 240 V with PCC Control Panel Box, hose pipe, brass nozzle complete all as specified and as directed.

Supply and fixing sheet metal enclosure 2 way for MCB SPN 32A, 240 volts complete all as specified and as directed. Note: MCB shall be measured and paid separately.

Supply and fixing MCB SPN, 32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc complete all as specified and as directed.

DG SET

Supply, install, testing and commissioning of Eco friendly Generating Set Diesel Engine driven of capacity 62.5 KVA/50 KW at 0.8 PF or nearest higher size 415 volts AC, 3 phase, 50 Hz 4 wire, directly coupled alternator and engine, water cooled common base platform with inbuilt fuel tank and including all excavation, PCC foundation, anti vibration pads/dampers as per manufacturer instructions and as directed by manufactured. The DG set shall work at ambient conditions of Gurgaon and produce specified out put.The derating factors, if any, shall be taken in to consideration while arriving the capacity to give specified out put. The DG set shall be factory assembled by the OEM of the engine manufacturer and all components shall be accommodated in enclosure and other accessories comprising of the following:-

(A) Engine : Eco friendly emission limits for Diesel engine as per CPCB documents vide latest notification GSR 105(E) dated 17 Feb 2015 at Ser No. 95 issued by Ministry and Forest Govt.of India and noise level (CPCB norms compliance) diesel engine conforming. Engine : Eco friendly for emission and noise (CPCB NORMS COMPLIANCE) diesel engine confirming to BS/IS standard,confirming to BS:5514/DN-6271 / IS 10002/ISO-3046, BHP as per the standered design of OEM to run the DG set in full load / 110% overload with out any change of out put parameters, (not less than 608 BHP),1500 RPM, water cooled complete under NTP condition, with a provision for 10% over load for one hour on 12 hours continious running with the following:- (i) Radiator/Heat exhanger cooling system (ii) Corrosion inhibitor coolent (iii) Engine mounted water pump (iv) Thermostats (v) Fly wheel with housing complete. (vi) Fuel pump system with heavy duty injectors and self contained piping. (vii) Spin on type fuel filters (viii) Lub oil pump with self contained piping. (ix) Heavy duty Turbo Charger (x) Air intake manifold with necessary connections.

(xi) Dry type replaceable paper element air filter. (xii) Exhaust manifold with flexible piping system and exhaust chimney extended up to a height as per statutory requirement of local pollution control board. (xiii) Hospital grade silencer. (xiv) Electronic Control panel with Digital governor (xv) Self starter, 12 V, DC (xvi) Display for fault (xvii) Lead acid DC battery 12 volts,80AH - 01 Nos (xviii) Battery charging alternator with inbuilt regulator. (xix) Electronic instrument Panel

(B) Alternator : Synchronous alternator 62.5 KVA, 1500 RPM, 415 Volts, 50 Hz, 3 phase system self excited, self regulated, self ventilated in brushless design provided with suitable automatic voltage regulator with ± 1% all load between no load to full load and power factor 0.8 to unity with 10% overload capacity for one hour in any 12 hours of operation without exceeding temp rise limit, Confirming to BS:5000/IS 4722 with standared design with IP 23 protection and class of "H" insulation & having surge seperator for protection of alternator for reverse supply .The alternator shall be capable of carrying an unbalanced load of 25% with out injurious heating of any part, provided rated current is not exceeded.The alternator shall withstand a short circuit at its terminals for three seconds with excitation adjusted to develop rated voltage at noload without any damage.

(C) Base Frame : Base rail made out of suitable MS channel mounted on AVM pads as recommended by the manufacturer with integral fuel tank of suitable capacity with drain plug, air vent, inlet and outlet connection, level indicator and with provision of cleaning.

(D) Acoustic enclosure : Acoustic enclosure drip proof & screen protected meeting stringent MOEF/CPCB norms of 75 dBA @ 1 mtr at 75% load under free field conditions with air inlet louvers powder coated. Use of stainless steel hardware and insulating materials shall meet exacting IS : 8183 insulating materials. Acoustic enclosure shall be as per manufacturer"s design.

(E) Provision of DG set foundation : As recommended by the manufacturer in PCC 1:2:4 up to 30cm above ground level.

(F) Generator controller: Microprocessor based generator controller with 4 line LCD display with settable prameters for display, audio visual warning and shut down for the following parameters:- (i) Display parameters, Battery voltage,Coolent Temperature,Lubricating Oil Pressure, Engine Speed, Engine Hours,Fuel level indication in %,Generator voltage, current, PF, KWH & KW (ii) Audio visual warning for following :- Low oil pressure, High coolant temperature, low battery voltage, low fuel level (iii) shut down/trip with audio/ visual anunciation for the following parameters :- High water Temperature (HWT), Low lube oil pressure (LLOP),Over/under speed,high canopy temperature, under/ over voltage, under/over frequency, low fuel level.

(G) AMF panel : Supply, install, testing and commissioning of AMF panel indoor type suitable for 62.5 KVA DG set, totally enclosed with sheet metal enclosure with sheet (CRCA) duly powder coated, dust & vermin proof made out of min 2.0 mm thick sheet , MS angle iron frame, front door with locking arrangement & two earth points by the side of box, floor mounted cubical type with cable, glands, sockets, etc with provision of cable entry from bottom all prewired and connected complete with comprising the following:- (a) Contactor heavy duty AC3 of capacity 125 Amps , 4 pole , 415 volts with auxilary contacts ( NO+NC) - 2 Nos (b) MCCB 4 Pole of capacity 125 Amps , with adjustable setting , Ics=100% Icu, 125 Amps , 25 KA , 415 volts AC supply - 2 Nos . (c) AMF relay, microprocessor controlled with LCD Display and LEDs for anunciation and settable parameters for sensing/ supervision of rated/ low/high voltage, low/high frequency of mains and generator, over speed, number of generator cranking and cranking period, unbalanced volage in %, delay time etc with four external fault inputs for HWT, short circuit, over current and earth faults complete.

Supply, laying, testing and commissioning of XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3½ core complete all as specified and as directed.

Material & Labour for earthing complete with GI mild steel earth plate electrode 600mm X 600mm X 6 mm thick, burried directly in ground veritcally (Earth pit not less than 2.25 metre deep below ground level) with top edge of the earth plate not less than 1.5 metres below normal ground level, the earth electrode surrounded by adequate quantity of charcoal and salt to a packed thickness of 15 cm on all sides and earth plate connected to GI strip of size 32 x 6 mm by means of bolts, nuts, check nuts and washers of steel and riveted to earth plate at one end and connected to metallic bodies of equipment etc. at other end, earth strip encased in and

including 40mm bore GI light grade pipe with all fitting from top of electrode to the body of equipment fixed with and including 25 x 4mm flat iron clamps, bolts, nuts and washer and also including GI pipe 20 mm medium grade for watering from bottom of earth pit to top of electrode including GI funnel with wire mesh all as shown in electrical plate No. 3 including PCC pit (1:3:6) type C1 in cement concrete 40mm thick precast RCC cover in (1:2:4) type B1 reinforced with 8mm dia TMT bars @ 75 c/c both ways with 01 No lifting handle of 12mm dia MS plain bar, etc. complete all as specified and as directed. NOTE : Quantity of GI strip/ protection pipe beyond 7.5mtrs length shall be measured and paid separately.

Total amount of Schedule 'A' Part XIV carried over to General Summary

Blank

Blank

GENERAL SUMMARY

Lumpsum price worked out by the contractor for "BUILDING AND STRUCTURES" as listed in Sch ‘A' Part I representing above / below the lumpsum price of Rs. 3,25,84,800.00 as inserted by MES for Sch ‘A’ Part I on Srl Page No.34(R)(R)

Lumpsum price worked out by the contractor for “SITE CLEARANCE, EXCAVATION & EARTHWORK” as listed in Sch ‘A” Part II representing above / below the lumpsum price of Rs. 25,84,522.21 as inserted by MES for Sch ‘A’ Part II on Srl Page No.36(R)

Lumpsum price worked out by the contractor for "INTERNAL WATER SUPPLY ” as listed in Sch ‘A” Part III representing above/below the lumpsum price of Rs.43,086.42 as inserted by MES for Sch ‘A’ part III on Srl Page No.38(R)

Lumpsum price worked out by the contractor for "INTERNAL ELECTRIFICATION ” as listed in Sch ‘A” Part IV representing above/below the lumpsum price of Rs. 9,21,981.70 as inserted by MES for Sch ‘A’ part IV on Srl Page No.43(R)

Lumpsum price worked out by the contractor for “CONDUIT FOR TV / TELE / AF NET” as listed in Sch ‘A” Part V representing above/below the lumpsum price of Rs. 43,949.00 as inserted by MES for Sch ‘A’ Part V on Srl Page No.45(R)

Lumpsum price worked out by the contractor for “COMPOUND WALL / GATE & FENCING" as listed in Sch ‘A” Part VI representing above/below the lumpsum price of Rs. 41,36,654.76 inserted by MES for Sch ‘A’ Part VI on Srl Page No.50(R)(R)

Lumpsum price worked out by the contractor for “ROAD/PATH/CULVERT/HARDSTANDING"' as listed in Sch ‘A” Part VII representing above/below the lumpsum price of Rs. 26,38,252.16 inserted by MES for Sch ‘A’ Part VII on Srl Page No.55(R)(R)

Lumpsum price worked out by the contractor for “AREA DRAINAGE” as listed in Sch ‘A” Part VIII representing above/below the lumpsum price of Rs. 4,06,684.04 as inserted by MES for Sch ‘A’ Part VIII on Srl Page No.57(R)(R)

Lumpsum price worked out by the contractor for “EXTERNAL SEWAGE DISPOSAL” as listed in Sch ‘A” Part IX representing above/below the lumpsum price of Rs. 3,49,592.63 as inserted by MES for Sch ‘A’ Part IX on Srl Page No.59(R)(R)

Lumpsum price worked out by the contractor for “EXTERNAL WATER SUPPLY” as listed in Sch ‘A” Part X representing above/below the lumpsum price of Rs.1,61,852.28 as inserted by MES for Sch ‘A’ Part X on Srl Page No.61(R)

Lumpsum price worked out by the contractor for “EXTERNAL ELECTRIC SUPPLY” as listed in Sch ‘A” Part XI representing above/below the lumpsum price of Rs.16,84,483.60 as inserted by MES for Sch ‘A’ Part XI on Srl Page No.65(R)

Lumpsum price worked out by the contractor for “AIR CONDITIONING” as listed in Sch ‘A” Part XII representing above/below the lumpsum price of Rs.1,15,482.06 as inserted by MES for Sch ‘A’ Part XII on Srl Page No.68(R)

Lumpsum price worked out by the contractor for “SPECIAL ITEMS FOR VEHICAL WASHING EQUIPMENT” as listed in Sch ‘A” Part XIII representing above/below the lumpsum price of Rs.23,800.64 as inserted by MES for Sch ‘A’ Part XIII on Srl Page No.70(R)

Total amount of SCHEDULE 'A' PART XIV (MISC B/R & E/M ITEMS) brought forwarded from Serial Page No. 90(R)(R)

NIHAL ENTERPRISES

M/S Darshan Singh Plaha