COMPREHENSIVE REPAIR TO SECURITY AND GATE PILLAR, PATH, FENCING AND OTHER MISC AT TEYLERABAD, NAD, PORT MOUT, PROTHRAPUR PLANT, BHATU BASTI AND CHOULDARI DAM UNDER AGE B/R-II AT GE MINNIEBAY, SRI VIJAYA PURAM

Amount

M & L for complete removal of existing treatment and Preparation of plastered wall surfaces using mechanical means and removing all fungus, black stains, algae elc and applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of WHITE colour with silicon additives @ 1.67 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and as directed by Engineer-in-charge. Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total), Shalimar Paints (Westherpro+ Super Luxury Emulsion)

M & L for complete removal of existing treatment and Preparation of plastered wall surfaces and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/itre and UV resistance as per IS 15489:2004, Alkali & fungel resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.67 litre/ 10 sqm over over old surfaces complete all as specified and as directed by Engineer-in-charge. Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+ Super Luxury Emulsion)

M&L preparing old putty/plastered surfaces of wall and applying two coats of high sheen, Anti-Fungal, Excellent Stain Resistant interior plastic emulsion paint over a coat of primer complete all as specified and as directed by Engineer-in-charge Make: Asian Paints (Apcolite Advanced Shyne), Berger (Easy Clean), Nerolac (Pearl), Shallmar (Superla Stay Clean)

MaL preparing old Putty/plastered surfaces of Ceiling and applying one coats of high sheen, Anti-Fungal, Excellent Stain Resistant interior plastic emulsion paint over a coat of primer complete all as specified and as directed by Engineer-in-charge. Make: Asian Paints (Apcolite Advanced Shyne), Berger (Easy Clean), Nerolac (Pearl, Shalimar (Superla Stay Clean)

M & L for preparation of old steel surfaces exc 10cm width and girth and applying one coat of synthetic enamel paint all as specified and directed.

Demolition of precast concrete block walling built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed.

M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) all as specified and as directed.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering on concrete or block masonry surfaces or surfaces other than fair faces of brick surfaces, 15mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

M&L proparing newly plastered surfaces of wall and applying two coats of high sheen, Anti-Fungal, Excellent Stain Resistant interior plastic emulsion paint over a coat of primer complete all as specified and as directed by Engineer-in-charge. Make: Asian Paints (Apcolite Advanced Shyne), Berger (Easy Clean), Nerolac (Pear), Shalimar (Superla Stay Clean)

M & L for rendering 15 mm thick In cement mortar 1.4 on concrete or brick masonry surfaces including mixing water proofing compound as par manufacurers instructions and finishing the top surface even and fair complete all as specified and as directed by Engineer-in-charge. Note: Water proofing compound will be measured and paid separatoly

Supply only liquid water proofing compound as per the direction of Engineer-in-Charge.

M & L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15488:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) ® over new surlaces complete all as specified and as directed by Engineer-in-charge. Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro Super Luxury Emulsion)

M & L for cleaning the existing floor / Concrete surfaces/Path by washing rubbing etc to remove caked mud / grease etc and applying high pressure wall jet of 120 PSI or move for obtaining a clean surfaces free from algac/organic particles and applying two coat of weather resistant floor paint over chequred/interlocking tiles complete all as specified and as directed. Make - Indigo or equivalent

Demolition of cement concrete in ground floor and pavings nexc 15cm thickness (below or above ground level) of complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 type C-1 (20mm graded aggregate ) plinth protection /sub base and similar work of complete all as specified and directed.

M&L PCC 1:2:4 type B1, using 20 mm graded aggregate as in coping etc., including necessary formwork of complete all as specified and as directed.

100 mm thick plain Cement concrete (1:4:8) type C-2 (using 40mm graded stone aggregate) in sub base of floor of complete all as specified and as directed.

M & L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment complete all as specified and as directed.

M&L for chequered cement concrete tiles mixed with grey cement and with pigment of size 300x300 x22-25 mm thick set jointed and pointed in neat cement slurry in floors incl 20 mm thick screed in CM 1:4 of complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Providing and laying vitrified parking tiles of sizes (400X400) of 10-15 mm thickness conforming to IS 15622 in all colors and shades in outdoor floors and skirting meant for parking of cars and trucks, grouting the 3 mm width joints using epoxy grout mix of 0.70 kg of organic coated filler of desired shade including filling/grouting and finishing set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete.all as sppecified and directed.

M&L for Coloured Non-skid/matt finish Ceramic tiles 7 to 8 mm thick exc. 0.11 sqm but n.exc 0.18 sqm area of each tiles in floor/ steps etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

M&L for Glazed Ceramic tiles 450 x 300 x 8.10 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing in cement mortar (1:3) all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.

M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate all as specified.

M&L PCC in surface channel with type B2 (1:2:4) using 40 mm graded stone aggregate all as specified.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in soft/loose soil complete all as specified and directed

Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25cm complete all as specified and directed.

Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for all as specified and directed.

M&L for Design mix RCC M-30 (using 20mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concretecomplete all as specified and directed.

M&L for Design mix RCC M-30 (using 20mm graded stone aggregate) in Walls, retaining walls,basement walls, ballast walls and the like; anythickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.

M&L for Design mix RCC M-30 (using 20mm graded stone aggregate) in Columns, pillars, piers, post & struts complete all as specified and directed.

M&L for Design mix RCC M-30 (using 20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5mtr span complete all as specified and directed

M&L for use and waste form work to sides of concrete foundations, footings, rafts, and raft beams sides and soffit of foundations and plinth beam and similar work for flat rough finished surface all as specified

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, griders, bressummers, lintels incluing supports, overhangs, cantilivers, shelves etc. also splays between floors and beams etc. of complete all as specified and as directed.

M&L for use and waste form work to pillars, posts, struts, piers, columns and stanchions and like for flat rough finishesd surface all as specified

M&L for use and waste form work to faces of walls retaining walls, abutments, parapets and like for flat rough finishesd surface all as specified

S&F TMT steel bars 10mm dia and over as reinforcement cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M&L for TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups spaces and binder cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by engineer-in-charge.

Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer of complete all as specified and as directed by engineer-in-charge.

Site Clearance in soft/loose soil by clearing shrubs, vegetation, grass, bush , weed, trees and saplings not exceeding 30 cm in girth, measured at a height of one metre above ground level and disposing rubbish/ useless materials upto a distance 50 m outside the periphery of the MD area. Roots of trees and saplings shall be removed as described under felling of trees and the hollows filled up with earth, levelled and rammed. complete all as specified and directed by Engineer in charge.

Cleaning of drains by destiling mud, vegetation, debries waste materials depositets etc, cleaning/removing manually/mechanically up to a depth of 1-2 mtr and removing the materials outside md land complete all as specified and as directed by Engineer-in-Charge.

Cleaning of drains by destiling mud, vegetation, debries waste materials depositets etc, cleaning/removing manually/mechanically up to a depth of 60 cm and removing the materials outside md land complete all as specified and as directed by Engineer-in-Charge.

Dismantling of plain or corrugated steel sheeting any guage thickness or similar pattern roof coverings complete all as specified

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instruction and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing all as specified and as directed.

M & L aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering of complete all as specified and as directed by engineer-in-charge.

S & F Mild Steel work as in Tubular Trusses, Posts etc including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS - 1161, Grade YST - 240, Medium Grade of any dia complete all as specified and as directed.

S&F mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment with grade Fe 410-W (Gde-E- 250) quality- A complete all as specified and as directed.

Boulder pitching, laid dry, hand packed tightly and pitching is grouted with cement and sand mortar 1:6 including raised pointed in cement mortar 1:4 (including dressing and levvelling the surface) complete all as specified and as directed by engineer-in-charge.

Supplying and Laying in repair CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with outer dia 20mm including taking down complete all as specified.

Supplying and Laying in repair CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with outer dia 25mm including taking down complete all as specified.

Supply and fixing 20 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) of complete all as specified and as directed by engineer-in-charge.

Supply and fixing 25 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) of complete all as specified and as directed by engineer-in-charge.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) coloured (including two Nos fixing bolts incl PVC seat cover but excluding flushing cistern and flush pipe) complete including making good to floor with and including fixing of P or S trap, complete all as specified and as directed.

Supply and fixing PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repair brass chromium plated over head shower rose with arm 125 mm size with long body with swivel joint including fixing to steel pipe or union, complete all as specified and as directed.

Supply and fixing in repair 10 litre capacity PVC low level valve less syphonic action type flushing cistern, white, with inlet, ball valve, float and handle including brackets, and bends complete all as specified and as directed.

S&F in repairs tubular towel rail of 20mm dia of 60cm in length, D shaped bracket brass chromium plated including brackets all as specified and directed.

S&F in repairs, 15mm CP 2 Way Bib Cock heavy duty all as specified and directed

S&F in repair 100 mm dia CP grating incl joints with solvent cement complete all as specified and directed.

S & F 32 mm (Dia of discharge pipe) Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) of complete all as specified and as directed.

S&F in repairs PVC flexible waste pipe of 32 /40 mm for wash hand basin and Kitchen sink of complete all as specified and as directed.

S & F in repair Bib Taps with flange, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed.

S&F in repairs stop valves/angle valve cast copper alloy chromium plated with long shank and cup fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore,including necessary cutting and making good wall or floor tiling to match existing(tiles to be paid supplied only rates) etc complete all as specified and as directed.

S&F brass chromium plated telescopic Hand shower(Health Faucet) (ABS Body) with 1 Meter long Easy Flex Tube in Chrome Finish& wall Hook all as specified

S & F in repairs Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repair Soap Dish with screws complete all as specified and as directed. Model No: Jaquar AKP-35731P

PVC (SWR) floor trap, 100mm dia plain with grating including jointing with solvent cement of complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in treanches incuding necessary clamps etc to fixing on walls as required all as specified.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. complet all as specified and as directed.

M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M & L for 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over 10 mm thick rendering in CM 1:4 jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Vitreous china white heavy duty Counter Top wash hand basin of 520x440x180mm size, including waste coupling and waste pipe all as specified and directed. (Make : Cat No P1614PW of Johnson /110501 of Somany)

S & F in repair Vitreous China urinals, bowl decorative type type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe of complete all as specified and as directed. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

M/s Harjas Construction & Waterproofing Co (BID ID -3500779)

ANITA VARMA ENTERPRISES (BID ID -3501414)

M/s Ramesh Lal (BID ID -3502592)

Sri Ram Construction (BID ID -3502789)

Nirman Construction Company (BID ID -3502032)

M/s K Moorthi (BID ID -3500853)

M/s Prem Enterprise (BID ID -3502120)