Construction of Annadhana Koodam

Amount

Earthwork excavation for foundation in all soils and sub soils to full depth as may be directed except hard rock requiring blasting inclusive of shoring, shuttering bailing out water wherever necessary and depositing with initial lead of 10 m and lift of 2m etc clearing and levelling the site etc complete complying with standard specification and as directed.

Supplying and filling in foundation and basement with filling M-Sand in layers of 150mm thickness well watered rammed and consolidated complying with relevant std specification including cost of supplying filling Sand.

Supplying and filling in foundation and basement with gravel layers of 150mm thickness well watered rammed and consolidated complying with relevant std specification .

Cement concrete 1:5:10 (One of cement five of M-Sandand ten of HBG jelly )for foundation using 40mm gauge HBG jelly inclusive of shoring strutting and baling out water where ever necessary ramming curing etc.,complete as per Std, Specification and as directed by the Dept, Officers

Damp proof course with Cement Mortar 1:4 (One Cement and Four crushed stone sand) 12mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used, finishing and curing etc. complete complying with standard specification.

Supplying and erecting for sides and soffits including neccesary supports upto 3.29 mht plane surface in all floors with all cross bracing using m.s sheets 90 × 60 cm and 10 gG Stiffend with welded m.s angle 25 × 25 × 3mm for Loading laid over silver oak joints 10 × 6.50cm spaced at 90 cm c/c and supported by casurina props of 10 cm to 13 cm spaced at not more than 15 cm c/c etc complete. a)Centering footing and Grade Beam

b)Centering for beams and slabs for above 3m ht. Up to 4.5 mt ht.

c)Centering for column

d)Centering for curved surface

Providing and laying position,Standardised concrete mi M-20 Grade in accordance with IS :456-2000,using 20mm and down graded hard brocken granite stone jelly for all Rcc items of works with minimum cement content of 3250 kg/cum and maximum water cement ratio of 0.55,inculding admiture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retart setting of concrete, improve workablity without imparing strengh and durability with about (5 cum)7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m)5156 kg of 10-12 mm machine crushed stone jelly and with about(4.79 cu.m)7670 kg of M-Sand,but eculding cost of reinforcement grill and fabricating charges,centering and shuttering and also inculding laying, vibrating with mechanical vibrtors,finishing,curing,etc,complete complying with standred specification and ass directed by the departmentel officers.the coarse and fine aggregates to be used shoul comply with the requirments of IS standreds.(No separate payment will be made by the Department for the excess usage of materials.) a)For Foundation & Basement

b)For Above Basement ( super structure)

Providing Anti-termite treatment to soil adjecent and under building foundation, plinth periphery of the building by application of chemicals of IS 63613 part I to IV in stages to suit the progress of work consist as per the detailed specification as below. Including breaking of termite mounds, making holes with crow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport and storing etc., complete and as directed by the departmental officers.

Supplying fabrication and placing in possition of MS or RTS bars for all RCC works including cutting bending and placing in position and also the cost of binding wire also etc., complete.

Brick work in Cement Mortar 1:5 ( one cement and five m sand) usingFly ash bricks size 9" x 43/8" x 23/4" including cost and conveyance of all materials and labour charges and all other incidental charges etc completc complying with standard specification.

Brick work in Cement Mortar 1:6 ( one cement and six m sand) usingFly ash bricks size 9" x 43/8" x 23/4" including cost and conveyance of all materials and labour charges and all other incidental charges etc completc complying with standard specification.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Plastering with Cement Mortar 1:5 (One Cement and five Plastering Sand) 12mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.

Weathering course concrete with broken jelly 20mm size and pure slaked lime over RCC roof slab, the proportion being 32:12.5 for required depth of 80mm for giving required slope and thickness of roof on required, well beaten with wooden beater etc, complete with standard specifications.

Finishing the top of roof with one course of machine pressed tiles 20cmx 20cmx20mm of approved quality laid in Cement Mortar 1:3, ( one cement three m sand)12mm thick mixed with water proofing compound 2% by weight of cement used etc, complete with standard specifications.

Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Paving the flooring with anti skid step tiles in all floors over a base layer of Cement Mortar 1:3, ( one cement and three m sand) 20mm tk and pointed with white cement mixed with colouring pigments at the rate of 0.40kg/m2 curing etc complete (The tiles should be got approved by the Executive Engineer before use on works.

Providing & fixing rain water down fall pipes of 110mm dia pvc pipes 4Kg/Sqcm with necessary shoes bends clamps screws nails etc complete with standard specifications.

Supplying and fixing of Teak wood frames including Labour wrought and put upt as per standard specifications.

Supplying & fixing Teak wood temple type door including all materials, labour charges for manufacturing and fixing in position including all furniture fittings etc complete with std. Specifications

Supplying and fixing of Flush door shutter in position using 35mm thick solid core Flush shutters with commercial ply on both sides with teak wood lipping alround including cost and labour for fixing the hold fasts and furniture fittings etc.,complete as directed by the departmental officers complying with standard specification.

UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Supplying and fixing mild steel grill for windows / Gate including cost conveyance of all materials and fixing in position including priming coat etc complete with standard specifications.

Painting two coats with emulsion Paint White using best quality including cost and conveyance of all materials and all labour charges etc. complete complying with standard specifications.

Painting two coats of newly plastered wall surface with Water based Exterior & Interior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Best varnish two coats for wood works etc, complete complying with standard specifications.

Painting new iron works such as gate, steel doors windows ventilators with two coats of approved quality and color of synthetic enamel paint over the existing red oxide primer in all floor etc, complete complying with standard specifications.

Dadooding glazed tileDadooing walls with Glazed tiles of sizes 300 X 450 X 8mm size of approved make and quality and color lSet in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Brick masonry in L.M 1:2, using stock bricks including all vaarivargams, moulds, sthambams, mukhapathramsa, koodu, nasi and all ornamental birck work complete, all pancharams, agarais, karnrakoodus, etc., forming core wlls of

Providing Vargapoochu over the corewalls of Vimanams / Gopurams, with lime Mortar 1:4 complete including shaping the mukhapathram, mahanasi, Koodu all ornamentals works to proper shape by embedding broken bricks of shaped/chiseled bricks, rough-plastering with Cement Mortar1:4and finishing with final ornamental plastering and nayam theervani including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc, complete including all extra for folding and including clearing from the vimanams/gopurams 100sft superficial area. for kalkaram

Providing new sudhai vigrahams in the vimanams and Rajagopurams with galvanized iron rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in CM 1:3 finishing the same with CM 1:3 bringing to the correct shape (Lakshana) in conformist with silpa sastra inclusive of special ornaments, weapons, peedam etc., complete and providing C.M. Nayam theervai wherever necessary. inclusive of cost and conveyance of all materials, such as cement broken bricks, and Copper rods. binding wire all labour for working in heights, curing lifting of materials etc., complete including cement painting 2 coats over a primary coat (one vigraham is accountable with one head, 4 hands with weapons, ornamental costumes etc., as per prathima lakshans, Vigraham height is measurable from the crown top to the bottom of foot only If peetam is provided the rate with peetam may be adopted as detailed hereunder) New suthai1'0"-2'6"

Painting with multicolour (Panchavarnam) good water based exterior emulson paints complete for the Vinamans/Gopurams, including cost and conveyance of all materials, lobour charges including Artist painter, working in heights, lifting of material, cost of brushes etc, complete-which including all extra for foldings-100sft, superficial area.

Supplying and Fixing Stainless steel sink 1200*550*180mm etc complete and as directed

Supplying and fixing steel handrail using 304 grade

Supplying laying and jointing U.P.V.C pipes ( 10Kg/SqCm ) of approved quality and best variety conforming to I.S.S and with I.S.I mark, of the following sizes including cutting and fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. Above ground level upto 4 m height. A) 32mm UPVC Pipe

B) 25mm UPVC Pipe

Supplying laying and jointing UPVC Specials (6Kg/SqCm) of approved quality and best variety conforming to I.S.S and with I.S.I mark, of the following sizes including cutting and fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. Above ground level upto 4 m height. a)32 mm UPVC UNION

b)32 mm UPVC Bend

c)32 mm UPVC TEE

d)32 mm UPVC VALVE

e)25 mm UPVC UNION

f)25 mm UPVC Bend

g)25 mm UPVC TEE

h)25 mm UPVC Valve

Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S and with I.S.I mark, of the following sizes including cutting and fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. Above ground level upto 4 m height. a)20mm UPVC union

b)20mm UPVC Bend

c)20 mm UPVC Tee

d)20 mm UPVC valve

Paving the Floor with Granite Tiles slabs, (Superfine polishedwith Machine cut edges) of size 4'0x2'0 (1200mm x600mm )and above 18mm to 20mm thick free from all defects in all floors over a base layer of CM 13:, 20 mm thick. The Granite slab slab shall be laid over the cement mortar by applying white cement slurry in between base mortar and Granite slab.

Labour charges for Double Nosing the Granite Slab including all other incidental charges etc complete complying with standard specification sl no 32(a)

Supplying and Fixing Cuddapah slabs of the following thick ness over a Brick partion walls for cubboard and pointed with cement mortar 1:3 ( one cement and three M-sand) complying with standard specification.

Supply and Filling 40MM HBGS jelly including cost and conveyance of all materials and all labour charges, curing etc,complete complying with standard specifications.

Supply and Filling 20MM HBGS jelly including cost and conveyance of all materials and all labour charges, curing etc,complete complying with standard specifications.

Supplying and fixing of Brass Chromium Plated screw down tap heavy tyoe 20mm dia of approved make conforming to I.S.specifications and quality including cost of shellac , thread etc.complying with standard specifications and including cutting and threading wherever necessary (Taps should be got approved by the executive Engineer before use on the work.

Supplying and Fixing PVC water tank of approved quality and good variety of 1000lt Capacity including Lid and fixing in Position etc., complete with standard specifications.

Supplying and erecting in position of 250 litres capacity Industrial Model Reverse Osmosis Water-cumPurifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories.(a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow eter - 1 No. 20” Filter with Housing - 1 No. Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings.The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install theSystem in position and intact(Sro 212)pg 61

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light / fan Point (for electronic regulator) (5 points per coil))

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed single core copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with Modular switch box and 5A 1M switch in flush with wall with Cover Plate sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point/ fan point (for electronic regulator)

Supply and fixing of single box type 4' 20W LED Wall fitting complete with TW round blocks on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of single box type 4' 20W LED Wall fitting complete with TW round blocks on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of 48W LED STREET LIGHT with 32mm dia GI pipe (Class 'B') with 1 No. 32mm GI bend complete on the existing post / wall with PVC unsheathed copper leads MS clamps and aluminium painting.00W 2M regulator with 300mm down rod on the existing clamp and painting etc complete

Supply and fixing of 1200mm sweep (48") AC ceiling fan High speed complete with stepped electronic regulator with 1 mtr down rod on the existing clamp

Supplying and fixing the AC Exhaust(SD114)Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening andmaking good of the wall

Supplying and fixing the EXHAUST of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan etc complete

Supply and fixing of 3 Nos. 5A (3 pin and 2 pin) combined flush type wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket) etc complete

Supply and fixing of 5A / 15A 3 pin combined flush type wall socket with 15A flush type switch concealed in suitable MS box flush with wall with painting etc complete

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. (Higher End) etc complete

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour etc complete

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour etc complete

Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V on7/20 GI bearer wire for service connection main etc complete

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains etc complete

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on(SD 125) wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit etc complete

Supply and fixing of 40ADPELCB / RCCB in sheet enclosure box with electrical connection complete.

Earthing as per PWD standard with an earth electrode of 2 metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work

Supply and run of 1 of No.8 SWG GI wire for earth connection

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD) 18%

S M R BUILDTECH (BID ID -1082197)