Reconstruction of Office Complex Executive Engineer, MGC W/S Division Mahendergarh situated in Canal Colony, Mahendergarh

Amount

Dismantling of Reinforced Cement Concrete

Dismantling of Brick work

Dismantling of Rubble Masonry/Stone Masonry

(a)Removing Doors

(b)Removing Windows

Earth work in execavation in foundation, trenches etc. In all kinds of soil, not exceeding 2 mtr. Depth including dressing of bottom and side of trenchers, stracking the excavated soil, clear from the edge of execavation and subsequent filling around masonry, in 15cm layers with compaction, including disposal of all surplus soil as disected with in a lead of 30 Mtrs

Earth filling under floors with surplus soil excavation from foundation and taken only from out side the building plinth in 15cm layers including ramming watering and consolidating lead up to 30 Mtrs.

Earth filling under floors with tibba sand non-plastic under floors with good earth taken from out side of campus area with all lead and lift including loading, unloading, laid in 15cm layer including ramming, watering, consolidating, compaction and compensation of earth etc. complete in all respect as per the (NS Item)

Cement Concrete 1:8:16 with stone aggregate 40mm nominal size in foundation and plinth

Cement Concrete 1:4:8 with stone aggregate 20mm nominal size in foundation and plinth

cement Concrete 1:1.5:3 with stone aggregate 20mm nominal size for reinforced concrete work in footing, strips, foundation beams, rafts, pedestals and approach slabs of bridge etc.

First class brick work laid in cement sand mortor 1:6 in foundation and plinth

Providing and infecting chemical emulsion for pre-constructionnal antitermiteatment and creating a chemical bassis under and around the columm pits wall trenches basment excavation, top surface of plinth filling juction of wall & floor along with the external perinter of building expansion joint surrounding of pipe & condits etc. complite (Carpet area at ground floor shall only be measured and paid) aldrin Embulsifiable concentrare 0.5%

Damp proof course 40mm thick of cement concrete 1:2:4 using store aggregate 20mm nominal size with coats of bitumen 20/30 prepartion at 1.65 Kg./Sqm laid hot and sanded

Base Course of floors consisting of 100mm thick cement concrete 1:8:16 and 100mm sand or store filling

Conglomerate floor 50mm thick cement concrete topping 1:2:4

Cement rendering on plaster 1mm thick

Providing and laying 80mm thick interlocking paver blocks of all shapes and colour in design mix cement M-35 ower a bed of 30mm thick fine sand complete in all respect

Preparation of Sub grade including trenching, rough dressing of soil, final dressing earth, to given levels and camber, watering, rolling with road rollers and compaction the bed

Providing and laying autoclaved aerated (Cellular) light weight block (As per 15:2185 part-3) in non load bearing walls using blocks of size 625mm x 250mm x 200mm with cement sand mortor 1:6 in supertructure complete in all respect

First class brick work laid in cement sand mortar 1:4 in first story upto 4 Mtr. Above plinth level

Cement Concrete 1:1.5:3 with stone aggregate 20mm nominal size for reinforced concrete work for wall exceeding 20cm thickness (straight and curved beams, girders, stairs, colomns , battens and lintels etc excluding steel reinforcement but including centering and shutring )

Cement Concrete 1:1.5:3 with stone aggregate 20mm nominal size for reinforced concrete work in slab with including not exceeding 25 degree with horizontal, excluding steel reinforcement, but incliding centring an dshuttering, laid in position complete in all respect

Cement Concrete 1:1.5:3 with stone aggregate 20mm nominal size for reinforced concrete work in shelves exeluding steel reinforcment, but including centering and shuttering laid in position, complete in all respect

Cement Concrete 1:3:6 with stone agregate 20mm nominal size in f&p

Cold twisted deformed (ribbed/tor steel) bars for RCC works, where not included in the complete rate of RCC including bending, biniding and placing in position complete

Terracing consisting of tiles 22.86cm x 11.43 cm x 3.81cm laid over 87.50mm mud filling on a layer of 25mm mud plaster and on coats of bitumen laid hot at 1.65 Kg./Sqm on top of RCC to be left clean etc.

Top khurra 0.6m x 0.6 m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement 1:8:16

Bottom khurra on ground 1.2m x 0.6m consisting on brick on edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12mm thick cement plaster 1:3

Cement concrete 1:2:4 gola 10cm x 10 cm quadrant along junction of roof with parapet wall finished smooth where specially cpecified

P&F PVC rainwater pipe 6Kg. Pressure of ISI mark in cement mortar during masonry work (b) 150mm dia PVC pipe 6Kg. Pressure note reputed make PVC pipe such as surplush, prince will be used as approved by Engineer in-charge

P&F and fixing PVC bend ISI mark (b) 150mm dia PVC bend Note-reputed make PVC bend such as supreme, finolex, prince will be used as approved by Engineer in-charge

Screed of 50mm thick cement concrete 1:8:16 to be laid below the topping

P&F vitrified tiles of size 600mm x 600mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with whit cement slurry mixed with pigment to match the shade to tiles Noe:- tiles shall be of premiun quality (first quality) of reputed manufacture like NITO, KAJARIA & RAK double charge tiles be used

P&F vitrified tiles of size 600mm x 600mm of approved make in skirting/dado laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with whit cement slurry mixed with pigment to match the shade to tiles Noe:- tiles shall be of premiun quality (first quality) of reputed manufacture like NITO, KAJARIA & RAK double charge tiles be used

P&F 1st quality ceranic glazed wall files confirning to IS 15622 (Thickness to be speeified by manufactures) of approved make in all colours shade except burgundy etc.

P & F Ceramic tile/Anti skid tiles of size 400mmx400mm or above size of approved make in flooring, laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tile.

Laying & fixing granite stone in all shades 15mm to 18mm thickin skirting laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of granite stone (Excluding the cost of granite stone).

Laying & fixing granite stone in all shades 15mm to 18mm thickin flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of granite stone (Excluding the cost of granite stone).

12mm thick cement plaster 1:4

10mm thick cement plaster of 1:4

P&F aluminium work for door window, ventilators and partions with extruded build standred etc.

P&F glazing in aluminium door, window, ventilators, shutter & pastitions etc

P & F Aluminium jali of thichness 7mm thick with opening 75mm x75mm of including anodizing and fixing in frame with cost of screws etc. Complete

Pressed steel sheet frame of size 127 x 50mm with 40mm wide double rabate

Pressed steel sheet frames of size 89mm x50mm with 40 mm wide single rebate

Wrought iron and mild steel

Supply & fixing glass panes in windows etc

P&F stainless steel falling of 304 heavy duty made (NS Item)

Factory manufactured solid flush door shutters with block board core as per I.S number 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hot pressed confirming to I.S 2202 part I & II etc.

Factory manufactured wire gauge door and window shutter of commercial hard wood such as hollock,champ,chikrassy and chaplash, etc(non-coniferous timber other teak conforming to i.s. Specification no. 1003,kiln seasoned)with 100 mm wide lock rail 200mm wide bottom rail,and wire gauge of 140G or 120G designation including cost of iron hinge,screws,chock/cleats,stops nails etc.,complete in position (excluding the cost of any fittings other than specified above but including labour for fixing the same in position)

Cost of aluminium fittings in doors and window

P&F Hydraulic door closer I.S.I mark,with necessary screws,etc.complete

P&F sliding bolt with nuts & screws etc complete Aluminium

P&F False ceiling with grooves 12mm to 15 mm thick 600mmx600mm best quality mineral fibre tiles of approved make fixed on MS steel runners frames I/C cost of screws angles,cleats, rawel plugs with taping & painting etc complete in all respect as approved by the Engineer -In-charge

Preparation of plywood surface for smooth paint etc.

Applying pink primer or aluminium priming coat on wood work including preparation of surface, knotting and sopping etc

Painting two coats execluding priming coat with synthetic enamel paint in all shades on wood work or metallic or plastered or concrete to give an even shade.

Applying priming coat with metal primer on new steel or iron work including down old paint

Painting two coats excluding priming coat with ready mixed paint for metallic surface in all shades on new stel or iron work

P&L average 6mm thick POP coating on wall, ceilings, beams & intels etc in all respect as approved by Engineer-in-charge

Distempering with washable oil bound distemper (of approved manufacture) 2 coats excluding priming coat on new work

Finishing external walls with Apex Paint two coats

P& F G.I Sheet 0.80mm thick

Providing steel pipe I.S.I. Mark in columns of C.I Pipe of Dia 100mm Complete fixed in position 100 mm (NS Item)

Wire Gauze fixed on chowkhats with 25 mm thick cover moulding of full widths of commercial hard wood such as hollock, champ chik-rassy and chaplash etc. (non-coniferous timber other than teak, confirming to I.S. Specification No 1003, kiln seasoned)

Supply and fixing trapezoidal/corrugated sheeting system in galvalume in colour coating steel atleast covered width of 1000 mm corrugated sheet be made from base metal having 0.8 mm thickness in steel of grade 345 as per ASTMA 792M coated with alloy of AI &Zn to grade AZ minimum alloy mass 150 gm/sqm total, both side with colour coating having complete dip tank pre-treatment process with chromat conversion (Cr+3) as main pre-treatment followed by PU primer of 05 micron DFT on each surface, finished with special polyster paint to grade 20 of min. 20 micron DFT on exposed surface and 5 micron in grey shad on unexposed surface. Fixing of above sheets with necessary shelf drilling and trapping screws/ bolts and nuts EPDM wasers with 150 mm laps where ever required make TATA/ Jindals, JSW/ Birla, HIL/SF Note: 1- The rates shall include costs of fixture like SD/Self trapping screws with EPDM washers incl. Stiching as required

Moulded case cricuit breakers supplying and erection of moulded case circuit breakers on wall or on exesting pedestal including bonding to earth and necessary connection (i) 15 amp to 60 amp 415V, 10 KA-3- phase

Supply and erection of M.S angle iron frame duly welded for housing M.S sheet & main switches etc. On it fixed on wall by means of suitable size of bolts with cement cocrete, duly painted with three coats of approved paint including one coat of red oxide (ii) size 40mm x 40mm x 6mm

M.S Steel supply and erection of 3mm thick mild steel sheet duly welded on existing M.S angle iron frame for fixing the maoin switches etc. As required duly painted with three coats of approved paint including one coat of red oxide.

Distribution board with plug and soket supply and erection of sheet steel enclosure 2 pole/3 pole with earth plug and soket suitable incorporatiing single pol/triple pole MCB on wall/on existing pedestal complete with necessary connection etc. S.P.N. enclosure for single pole MCB 20 amp

Blanking sheet supply and erection of bianking sheet in existing distrubtion board

Miniature cricuit breaker and isolator supply and erection of miniature circut breaker/solator 240/415 V in the existing distribution board including making necessary connection (a) miniature circuit breakers of 9 KV breaking capacity (i) MCB 6 amp

(ii) SP MCB 10 amp

(iii) SP MCB 20 amp

(i) making suitable hole in the wall upto 450 mm sweep exhaust fan including finishing the same and fixing of wire mesh duly fixed with deodar wood frame of section 40mm x 25mm thick

(ii) Providing and fixing required size of deodar wood frame of section 50mm x 32mm for fixing exhaust fan upto 450mm sweep

(i)Supply and erection of PVC pipe ISI marked (Medium) recessed in wall/celling etc. Including the cost of PVC bends inspection boxes, iron hooks and cement concrete etc. Complete in all respect upto the entire satifaction of Engineer in-charge of work PVC Pipe 32 mm dia

(ii) PVC Pipe 40 mm dia

(i)Earthing earthing with G.I earth pipe 4.5 Mtr.long and 40mm dia with masonry enclosure on the top etc. As required

(ii) Extra for using salt and charcoal/cocke for pipe earth electrode as required

(iii)Pdg. And laying earth conncetions fron each electrode with 4mm dia G.I wire in 15mm dia G.I pipe from earth electrode as required

(iv) pdg. For fixing 4.00mm dia G.I wire on surface or in recess for loop earthing as required

(i)Miscellanceous (HSR 31.35) (iii) supply and erection of caution notice plate in three languages

(ii) Supply and erection of shock restoration chart in glass frame

(iii) Supply and erection of 75mm x 75mm x 60mm deep M.S box for telephone an dinter communication systen including 2 pin 5 amp soket including cost of sheet

(i) PVC wiring in recessed conduit (HSR 31.36(i) b) wiring in 1.5 Sq. Mm PVC insulit copper conductor cable in 1.6 mm thick conduit pipe (i) fan point medium point

(ii) long point

(iii) Light point short point

(iv) medium point

(v) long point

(vi) Twin control light point with 2 way 5 amp single pole switch long point

call bell point including M.S box of size 180mm x 100 mm x 60mm deep for call long ponit

3 pin 5 amp plug point including earthing the 3rd pin etc. Short point

Mediium Point

Long point

3 pin 15 amp plug point including earthing the 3rd pin etc. With 4 sq. Mm PVC insulated copper conductor cable long point

(i) Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe cable size 1.5 Sqm (3/0.81mm)

(ii) cable size 6.0 Sqm (7/1.05mm)

Supply and erection of double door sheet steel enclosure distribution board suitable for MCB and ELCB etc. Recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in-charge of work 16 way TP & N (Horizontle)(8+48)

Supply and erection of PVC conduit pipe ISI marked (Medium) recessed in wall/celling etc. Including cost of PVC bends, inspection boxes and all other material required to complete the job in all respect upto the entire satifaction of Engineer in-charge of work b25mm dia

Providing and fixing modutar type accessories of approved make in existing box including fixing and making necessary connection complete in nall respect (i)10 amp 1 way switch

(ii) 10 amp 2 way switch

(iii) 20 amp switch

(iv) 10 amp socket

(v) 16 amp socked

(vi) Bell Push

(vii) Fan Regulator

(viii) Call Bell Ding-Dong (Monica)

(ix) Blanking Plate

Providing and fixing GI concaled sheet metail boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respect 11 & (i) 2 Modules

(ii) 3 Modules

(iii) 4 Modules

(iv) 6 Modules

(v) 8 Modules

(vi) 12 Modules

Supply and erection of PVC pipe ISI marked (Medium) recessed in wall/celling etc. Including the cost of PVS bends inspection boxes, iron hooks and cement concrete etc. Complete in all respect upto the entire satifaction of Engineer in-charge of work (ii) PVC pipe of 40mm dia

Execavation for pipe lines running under pressure in trenches and pits in open areas, where disposal of surplus earth is done along with the aligment including trimming 7 DRESSING SIDES, LEVELLING OF BEDS OF TRENCHES TO CORRECT GRADE CUTTING joint holes cutting trees and bushes etc. refilling consolidation and and watering of unmetalled or unpaved surface to its orignal condition including the cost of dewatering of rain water diversion of traffic night signals, fixing caution borads, watching, fencing etc, and outside the town in ordinary soil up to 1.5 m depth.

Labour for laying jointing, fixing and testing G.I/PVC/W.I pipe line and specials tees bends, sokets, elbows etc. Inside building and testing etc. Complete including cutting threading Including cost of specials 15 mm.

Extra for fixing & jointing union couplings in GI on WI pipe line 15mm

Drilling and tapping cast iron pipe line of all diameters and screwing in ferrule and connetion

Cutting holes upto 23cm square through brick work in mud walls for pipe and making good including repointing replastering and finishing according to existing finish whwre required. 11.43 cm thickness of wall

22.86 cm thickness of walls

Fixing galvanised malleable iron holer bats hold fast to pipe lines fixed on walls and ceiling including all cutting to walls and making good to original condition 15 mm internal diameter of pipe line

20mm internal dimeter of pipe line

25mm internal diameter of pipe line

40mm internal diameter of pipe line

Fixing and jointing gun metal peet valves (heavy pattren) with hand wheels on GI pipelines laid in the ground of inside building including cartage rom divisional dtores or nearest railway station to site of work 15 mm internal diameter

20mm internal diameter

25mm internal diameter

40mm internal diameter

Bailing out water from the trenches for making new connection in fully charge pipe lines including cleaning trimming and dressing the trenches to correct aligment and grade as required by the Engineer in-charge upto 200 mm I/D

Constructing brick masonry inspection chamber size as given below upto 0.60 Mtr. Average depth in cement mortar 1:5 lime concrete with 40 percent concrete 1:2:4 benching 12mm thick cement plaster 1:2 with a floating coat of 1mm rhick of neat cement RCC 1:2:4 slab 100mm thick of thick/C.C topping 50mm thick with 455 mm x 455mm/455mm x 610mm inside light duty C.I inspection chamber cover and frame weight as per ISI specification painted with 3 coats of black bitumastics superior paint complete as per standrad design (c) size 600 mm x 900 mm inside (with 455 x 455 mm cover and frame light duty single seal weighting 20 kg with C.C topping RCC slab

Providing and laying SW pipe grade A in standred length of 600mm each pipe marked with IS 651 and their lowering cutting, jointing & testing as described in HSR item No. 29.38 to 29.40 including the cost of jointing material as well as carriage, loading unloading, stacking handling, rehandling etc. complete in all respect to the satfaction to the Engineer (ii) 150 mm I/D

Providing and fixing in position best Indian make (to approval of the Engineer in-charge) Indian type orisa or orya water clost suit for sinking into floor with raised foot treads complete with 100mm H.C.I. "P" trap with or wihput vent as required and all other necessary fitting as fully described in item No. 301.1 aboe (i) White

Providing and fixing in position best India make European type water closet suit with concealed 'P or 'S trap with or without vent (as approved by the Engineerin-charge) and all other necessary fitting as fully described in item no.30.3 above white

Providing and fixing 15 liters capacity low level vitreous china ware cistern complete with flush bend all other necessary fitting instead of C.I high level cistern complete with fitting White

Providing and fixing best indian make plastic hygenic seat with lid complete instead of holloe black or plastic seat and lid White

Providing and fixing in position best Indian make a range of four squatting urinals in vitreous were with two nos 5 Ltr. Capacity and flush pipe complete as fully described Item No. 30.33 above White

Providing and fixing 25mm thick marble backes for the different type of urinals Size 60mm x 1050mm

Providing and fixing in position HDPE water Storage tank

Providing and fixing in position 32mm dia G.I waste pipe embedded in wall or lead waste pipe (weighin 3.47 Kg. Per metre and 2.8mm thick) upto floor leval including cost of wipped solder joint etc. Complete (as required by the Engineer in-charge)

Providing and fixing in position best indian make towel rails fixed in with rawlslugs embedded in walls with C.P Brass screws, complete in all respect including cutting and making goods the walls etc (a)25mm dia C.P brass adjustable (ii) 600mm long

Providing and fixing in position glass shelf fixed in with rawl plugs with C.P brass screws complete including cutting and making good the walls etc. (a) With C.P Brass and guard rail (i) 600mm x 125mm

Providing and fixing in position best Indian make bevelled edge 5.5mm thick mirroi mounted on asbestos of 4 nos chromium plated brass screws and washers over rubber washers and rawl plug embeded in the wall or chromiun plate brass clamps with C.P brass screw (as required by the Engineer in-charge) complete including cutting and making good the walls etc. (a) Indian make (I) 600mm x 450mm

Providing and fixing in position 15mm I/D C.P. Brass bib cocks of best qualtiy (as required by the engineer i charge) (a) Bib cock long body

(c) Bib cock short body

Providing and fixing positon C.P brass stop cocks (as approved by the Engineer in-charge) (a) 15mm stop cock (i) Stop cock male and female end

(ii) Concealed stop cock with flange

providing and fixing in position best Indian make flexible tube connection C.P Brass (i) 15mm x 300.mm

Providing and fixing in position H.C.I. Soil waste vent or antisyphonage pipes to ISI specification of E.L.C. Manufacture or of any other required firm including cutting and wastage etc. And cutting hoels in walls, roofs or floor etc. And making good to its original condition but excluding cost of lead jointing 100mm internal diameter

75mm internal diameter

Providing lead caulked joints to HCI pipes and spcials conforming to I.S.I specificatio of E.L.C manufacture of any other reputed firm inclding cost of lead yarn, fuel and tools etc.100mm internal diameter (1.13Kg.)

75mm internal diameter (0.91Kg.)

Providing and fixing in position M.S or heavy flat iron clamps made out of M.S flat not less than 5mm of the approved deign for fixing C.O soil waste vent or anti pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting For 100mm internal dimeter pipes

For 75mm internal dimeter pipes

Providing and fixing HCI floor traps ISI marked od the self clening design with C.P brass hinged grating with frame with or without vent arm and including cement cencrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors etc. minimum depth of water should be 150mm with a minimum seal of 50mm (b) With 75mm I/D outlet

Providing and fixing in position HCI 50mm internal diameter outlet plain nahani trap ISI marked of the self celaning design with CP brass hinged granting with frame weighting 6.80Kg. Each fixed complete as fully described in item No.30.89 with 75mm i/d outlet plain Nahani

Providing and fixing in position H.C.I special for soil, waste, vent or anti syphonage pipes to I.S.I marked including cutting and wastege etc. Cutting holes in walls roofs of floors etc. And making good to its original condition but excluting cost of lead jointing 100mm i/d pipes (i) Heals rest bend

(xvi) Cowls @ 164.25

(xiii) Bend with door @ 270.00

(xxii) Collars @ 123.75

Credit of Bricks

Credit of Stone

Credit of Steel

Rakesh Kumar Contractor