RR damages to FIS urni tehsil Nichar Distt Kinnaur

Excavation in foundations,trenches etc. in earth work, lift upto 1.5mt.stacking the excavated soil not more than 3mt clear from the edge of the excavation & then returning the stacked soil in 15cm layers, when required into plinths sides, of fundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20mtr.

Wire crate made of G.I wire filled with boulders with square cut faces against the wire. (wire crate to be measuresd and paid for separetely)

Wire crate made of G.I wire filled with boulders with square cut faces against the wire. (boulder filling to be measured and paid for separately) G.I. Wire 4mm thick to SWG-8 15cmX15cm mesh. Corresponding

Providing and laying cement concrete 1.3:6 (1 cement: 3 sand: 6 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation & plinth.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 sand: 12 graded stone aggregate 20mm nominal size) at plinth level in:CM 1:6.

P/L CC Topping in1:3:6

Stone Filling behind retaining wall

Laying ,Jointing and testing of HDPE (Hight Density Polyethyene pipes)conforming to IS 4984-2016 in proper position including hydraulic testing as per releventis code complete with in all material for jointing procedures with sockted joints including all lead and lift as directed by engineer incharge as conforming to IS-7634(Part-II).2012 amended upto date (earth work in trenches and Sockets to be measured & Paid separately)

a) 315 mm outer Diameter PE 63/PN-8

Providing and fixing high density Polyethyene pipe Socket for Jointing of HDPE Pipe 315mm OD in trenches complete in all respect (earth work in trenches to be measured & Paid separately) within all leads and lifts.

HDPE 315mm dia pipe Socket

Providing and fixing flange of high density Polyethyene pipe Socket 315mm outer dia ISI marked is -4984-1995 with upto date amendment but jointing complete in all respect (earth work in trenches to be measured & paid separately) within all leads and lifts

HDPE 315mm dia pipe Flange