Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹74.5 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹76.4 L+₹1.7 L (2.33%)Rejected-Finance 129 PANCH SHEEL VENUE DEEP NAGAR JALANDHAR CANTT PB | JALANDHAR | PUNJAB | 144001 | L2 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | NATIONAL ROAD BUILDERS L1 | s s construction L2 |
|---|---|---|---|---|---|
| 1.00 | Repair to pot holes any depth, not exc 1 sqm each including sweeping free from dirt and mud of water sunken surface in roads, paths etc. cutting around edges to at least 25mm in depth making good by appling tack coat on bituminous surface with cationic bitumen emulsion RS-1 grade conforming to IS:8887 @ 5 Kg per Ten Square Metre, putting in Pre-mixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm, binded with 0.09 Cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of pot holes exc 30 mm complete, all as specified and as directed | 10 | Ten Square metre | 2,500 ₹25,000 Lowest | 2,500 ₹25,000 Lowest |
| 2.00 | Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with compressed air to remove all loose dirt etc., and applying evenly a priming / tack coat on existing cleaned black top surface with bitumen primer @ 05Kg per Ten Square Metre and including Bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% paving bitumen using bitumen VG-30 paving grade ( 50 -70 penetration) binder content by weight of total mix with hydrostatic sensor paver finisher rolled and compacted with 8 to 12 tonne power roller to required camber and gradient, complete, all as specified and as directed by the Engineer-in-Charge. | 1,260 | Ten Square metre | 4,200 ₹52,92,000 Lowest | 4,300 ₹54,18,000 |
| 3.00 | Material and labour for premix bituminous, macadam with 4% binder content (paving bitumen VG-30) by weight of total mix by hot mix process laid/ rolled and compacted to required gradient and camber consolidated thickness 75 mm or less
Note: Repair to pot holes any depth not exc 1 sqm each and depression in patch over 50mm, shall also be carried out under this item. | 40 | Cubic metre | 6,000 ₹2,40,000 Lowest | 6,000 ₹2,40,000 Lowest |
| 4.00 | Applying evenly a priming / tack coat with paving cationic bitumen emulsion SS-1 grade conforming to IS:8887 @ 5 Kg per Ten Square Metre, by mechanical sprayer, complete, all as specified & directed. | 80 | Ten Square metre | 400 ₹32,000 Lowest | 600 ₹48,000 |
| 4.01Note for item No. 1 to 4. (a) Preparation of mix in hot mix plant, spreading by self propelling mechanical paver and rolling and compaction by set of rollers as specified in particular specifications shall be carried out. Hot mix plant may be installed at any distance but the contractor shall be responsible for maintaining the required temperature of mix under all conditions till it is laid and compacted. Unit rate against these items shall include for carrying out the works with deployment of these machinery for which nothing extra shall be payable and no delay in completion of work shall be acceptable on this account. (b) To achieve marshal stability of 1050 KN and all as per SSR Part-I Clause No. 20.B.4. (c) If qty of binder contents is less than the qty as specified in respective items of BOQ, it shall be adjusted at supply only rates of paving bitumen @ Rs 60.00 Per Kg and if qty of binder contents is more than the qty as specified in respective items of BOQ no adjustment shall be made. | |||||
| 5.00 | Preparation of butuminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc and the like n. exc 10 cm wide on road/pavements with hot applied thermoplastic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machineall as per manufacturer's instruction, complete all as specified and directed.
Note : Contractor shall have to furnish the detail that quantity minimum used per square meter is 5.00 Kg/Sqm. | 350 | Square metre | 500 ₹1,75,000 | 50 ₹17,500 Lowest |
| 6.00 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PMMA striplens reflector of model No. DA-972 fixed with and incl MS stud of suitable size as per manufactures instructions., complete all as specified and directed. | 400 | Each | 400 ₹1,60,000 Lowest | 400 ₹1,60,000 Lowest |
| 7.00 | Solar cat eye aluminium alloy shall ( 100% water proofing design according to 65 ) of size 125mm x 125mm x 25mm ( shank 65mm ) of high efficiency Mono rystafie solar panel 2.4V / 0.3 watt one NI -ed rechargeable battery ( 1.2V / 1600MA ) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufactures instructions etc. all as specified and directed with stem self illuminating in dim areas during night time . Solar rechargeable batteries for continual performance without much maintenance . Super bright LEDs with a viewing distance of 500 meters . Equipped with prismatic reflective lens on each side ensure maximum reflectivity make up of highly compressive material cosustain over 10 tones water resistant. | 200 | Each | 1,800 ₹3,60,000 | 1,700 ₹3,40,000 Lowest |
| 8.00 | Metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed by the Engineer-in-Charge. | 150 | Each | 800 ₹1,20,000 | 600 ₹90,000 Lowest |
| 9.00 | Supply and fixing conves mirror of 800mm dia , made of plycorbonate material provided with 50mm mild steel medium weight pipe cost, duly powder coated fixed on ground with PCC 1:2:4 type B-1 of block size 60x60x60cm including excavation earth work and removing excavated soil to a distance n.exc 50m, complete all as specified as direct by Enginner-in-Charge. | 8 | Each | 5,000 ₹40,000 | 4,000 ₹32,000 Lowest |
Tender Value
₹70 L
EMD Value
₹1.3 L
Closing Date
22 May 2026, 6:00 pmClosed
Col Neelima CWE
Military Engineer Services, Commander Works Engineer, Udhampur, PO - Garhi, Udhampur-182121
REPAIRS AND RESURFCAING TO ROADS AND OTHER ALLIED MISC WORKS INCLUDING ROAD FURNITURE IN MD AND OTM ACCN AREA OF 874 AT BN AND 5171 ASC BN RWA 25 RWA 22 5071 ASC BN AND ADJOINING AREA OF JNE UNDER AOR OF AGE B/R II UNDER GE (NORTH) UDHAMPUR
2026_MES_761949_1
CWE/U(N)-16/2026-27
Open Tender
Civil Works
Item Rate
120 days
UDHAMPUR
As per NIT
7 documents required · 7 mandatory
₹1,000
GE (North) UDHAMPUR
₹1.3 L
8 Jul 2026
24 Apr 2026
25 May 2026
24 Apr 2026
22 May 2026
15 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Repair to pot holes any depth, not exc 1 sqm each including sweeping free from dirt and mud of water sunken surface in roads, paths etc. cutting around edges to at least 25mm in depth making good by appling tack coat on bituminous surface with cationic bitumen emulsion RS-1 grade conforming to IS:8887 @ 5 Kg per Ten Square Metre, putting in Pre-mixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm, binded with 0.09 Cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of pot holes exc 30 mm complete, all as specified and as directed | - | Ten Square metre | - | - |
| - | Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with compressed air to remove all loose dirt etc., and applying evenly a priming / tack coat on existing cleaned black top surface with bitumen primer @ 05Kg per Ten Square Metre and including Bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% paving bitumen using bitumen VG-30 paving grade ( 50 -70 penetration) binder content by weight of total mix with hydrostatic sensor paver finisher rolled and compacted with 8 to 12 tonne power roller to required camber and gradient, complete, all as specified and as directed by the Engineer-in-Charge. | - | Ten Square metre | - | - |
| - | Material and labour for premix bituminous, macadam with 4% binder content (paving bitumen VG-30) by weight of total mix by hot mix process laid/ rolled and compacted to required gradient and camber consolidated thickness 75 mm or less
Note: Repair to pot holes any depth not exc 1 sqm each and depression in patch over 50mm, shall also be carried out under this item. | - | Cubic metre | - | - |
| - | Applying evenly a priming / tack coat with paving cationic bitumen emulsion SS-1 grade conforming to IS:8887 @ 5 Kg per Ten Square Metre, by mechanical sprayer, complete, all as specified & directed. | - | Ten Square metre | - | - |
| - | Preparation of butuminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc and the like n. exc 10 cm wide on road/pavements with hot applied thermoplastic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machineall as per manufacturer's instruction, complete all as specified and directed.
Note : Contractor shall have to furnish the detail that quantity minimum used per square meter is 5.00 Kg/Sqm. | - | Running metre | - | - |
| - | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PMMA striplens reflector of model No. DA-972 fixed with and incl MS stud of suitable size as per manufactures instructions., complete all as specified and directed. | - | Each | - | - |
| - | Solar cat eye aluminium alloy shall ( 100% water proofing design according to 65 ) of size 125mm x 125mm x 25mm ( shank 65mm ) of high efficiency Mono rystafie solar panel 2.4V / 0.3 watt one NI -ed rechargeable battery ( 1.2V / 1600MA ) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufactures instructions etc. all as specified and directed with stem self illuminating in dim areas during night time . Solar rechargeable batteries for continual performance without much maintenance . Super bright LEDs with a viewing distance of 500 meters . Equipped with prismatic reflective lens on each side ensure maximum reflectivity make up of highly compressive material cosustain over 10 tones water resistant. | - | Each | - | - |
| - | Metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed by the Engineer-in-Charge. | - | Each | - | - |
| - | Supply and fixing conves mirror of 800mm dia , made of plycorbonate material provided with 50mm mild steel medium weight pipe cost, duly powder coated fixed on ground with PCC 1:2:4 type B-1 of block size 60x60x60cm including excavation earth work and removing excavated soil to a distance n.exc 50m, complete all as specified as direct by Enginner-in-Charge. | - | Each | - | - |
| - | 75mm thick Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in floors or pavings, complete all as specified and as directed. | - | Square metre | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.57 MB
BOQ_853497.xls
BOQ • 0.58 MB
Tenderdcuments.pdf
Tender Documents • 1.46 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .