Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹24.1 LAccepted-AOC HOUSE NO 1310 SECTOR 4 URBAN ESTATE GURUGRAM 122001 | GURUGRAM | HARYANA | 122001 | 1 | Accepted-AOC Lowest Rate | |
| 2 | 2₹22.1 L+₹74,086 (3.47%)Rejected-Finance PLOT NO 172 22 GALI NO 09 GANDHI NAGAR GURGAON 122001 | GURGAON | GURUGRAM | HARYANA | 122001 | 2 | Rejected-Finance Highest Rate | |
| 3 | 3₹22.1 L+₹74,424 (3.49%)Rejected-Finance VILLAGE DUMERKHA KALAN POST OFFICE DUMERKHA KALAN TEHSIL UCHANA DISTRICT JIND 126115 HARYANA | DUMERKHA KALAN | JIND | HARYANA | 126115 | 3 | Rejected-Finance Highest Rate | |
| 4 | 4₹23.6 L+₹2.3 L (10.6%)Rejected-Finance | 4 | Rejected-Finance Highest Rate |
Tender Value
₹24.9 L
EMD Value
₹49,820
Closing Date
22 Sept 2022, 5:00 pmClosed
Vishal Garg
Municipal Corporation Gurgaon
Providing and fixing of 9 Mtr Mini High Mast with LED Light 400 watt and Music System at ward No-21 under limit of Municipal Corporation Guurugram.
2022_HRY_236869_1
2022E758EB75 E18D 4ECC BEDD B5CF0A9B8086285ULB
Open Tender
Electrical Works
Works
200 days
Gurugram
Providing and fixing of 9 Mtr Mini High Mast with LED Light 400 watt and Music System at ward No-21 under limit of Municipal Corporation Guurugram.
2 documents required · 2 mandatory
₹1,000
₹49,820
20 Dec 2022
30 Aug 2022
23 Sept 2022
30 Aug 2022
22 Sept 2022
30 Aug 2022
Amount
Providing and fixing of 9 Mtr Mini High Mast with LED Light 400 watt and Music System at ward No-21 under limit of Municipal Corporation Guurugram.
Supply and Erection of Timer Contractor, DP, MCB mounted on Bakelite sheet and Installed in water proof CRCA Sheet 18 SWG duly painted with powder coated paint Box of Size 12''x 15''x 5'' duly lockable including Input and Out Put Connectors Bakelite/Porcine of 63A Rating and necessary service cable up to 10 mtr, complete with internal copper wiring and installing the same on pole/pedestal with suitable means at height desired by Engineer in charge to avoid theft upto entire sanctification of engineer incharge with following specification. Timer :-Quartz Analog/Digital 24 Hour Operation (L&T/Siemens/Schneider) Contractor :- 3Pole 40A, 415Volt. (L&T/Siemens/Schneider) DP MCB :- 40A 2 pole. (L&T/Siemens/Schneider)
Supply and erection of Low Impedance (Bollard type) 40watt garden speaker in suitable fixture, water resistant polyproplene , power input 1800watt and making of foundation 1:1.5:3 for foundation of size 0.4 m x 0.4 m x 1 m minimum 4 nos. 12 mm dia longitudinal MS reinforcement rods with rings of 4 nos 8 mm dia with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work. Make - Ahuja Gs-6301T or equivalent Syco, JBL, Pioneer
Supply and erection of PA Amplifier designed to five high power clean sound with Aux input, suitable for CD/DVD/USB/Pen drive with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work (Suitable for 30 speaker of 40 watt) . Make - Ahuja, Syco, JBL, Pioneer
Supply & erection of Speaker Cable PVC Copper 1 Sq.mm x 3 core insulated and sheathed circular flexible wire (make:Havells, RR, Polycab) with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work
Cost of RCC 1:1.5:3 for foundation of size 700x700x1500mm include base 1200x1200x300 with with minimum 8 nos. 12 mm dia longitudinal MS reinforcement rods with rings of 4nos 8 mm dia manufacturing from special steel along with nuts, washers, anchor plate & template all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work.
Supply and erection of Decorative Mini High Mast Fixture Brix 400 watt IP-65, Total height of the GI pole is 9 meter lower part of the pole is having 140 mm dia with 4.3 mm thickness height 3meter. Base plate having 400*400*20mm thick elliptical shape service window having loop in loop our 4way connector 40 amp suitable for 10Sqmm wire with 6amp single pole MCB, middle part of the pole having 114mm dia with 4mm thickness height 3 meter. top part of the pole having 90mm dia with 3.7mm thickness height 3 meter. At the bottom of pole there is a cast iron base having dia 260mm and height of base is 220mm. decorative cast iron/aluminum casting are used at the joint of pole. Pole & decorative casting parts are PU panted in three layers coating in which 1st layer with ETCH primer, 2nd layer with EPOXY primer and 3rd final layer with PU paint, light fixture is made of cast aluminum housing having width of 700mm and height of the fixture is 270mm. light fixture is suitable for 350w(As per drawing). LED is mounted on MCPCB with single piece lens on 12 led. T2 lens is used for wide distribution of light fixture is IP65. including Hydra, labour & material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work. Make- Glowmac make Modal No- GL-A-BRIX-ESTILO, Twinkle (Lite), Philips, Wipro, Crompton, Vak lighting or equilent.
Supply and erection of under ground Armoured cable loose in existing pipe or trenches complete with necessary connection. Make RR / Havells / Polycab. 16 Sq. mm 2 Core Cable .
Supply and erection of MS wire mesh jall (welded) on MS angle iron frame duly welded on MS angle frame including the cost of primer coating and painting charge of MS jall and MS steel frame in all respect upto entire satisfaction of Engineer-in-charge of the work.
Bidder Name
Amount
Bharat Pumps and Projects(GSTN-06AAFFB8981N1ZT)
Royal Traders(GSTN-06BDLPK6716N1Z1)
DHEERAJ ENTERPRISES(GSTN-06AAKFD3784C1ZI)
Fortune Enterprises(GSTN-NA)
DHEERAJ ENTERPRISES
Fortune Enterprises
Royal Traders
Bharat Pumps and Projects
Fortune Enterprises
DHEERAJ ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .