Repairing and Interior works of Executive Engineer office and Entrance Lobby in Division Office Havlock Road, Lucknow.(Lot-6)

Amount

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Up to 10 mm thick

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.

Dismantling cement concrete or brick or granolithic floors, including base concrete and including stacking of dismantled materials as directed by Engineer-in-charge with in a distance of 60 meters. As in item 697 above but floors to be stone flagged or tiled floor.

Dismantling doors & windows, Chaukhats with hold fast & including stacking of materials as directed by the Engineer-in-charge with in a distance of 60 meters (200ft.)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engieer-in- Charge. with cement mortar 1:4 ( 1Cement :4 Coarse Sand)

Treatment of soil under existing floors using chemical emulsion@one liter per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2(1 Cement :2 Coarse Sand ) to match the existing floor : with Chlorpyriphos/Lindane E.C. 20% with 1 % concentration

Scraping old white or colour wash including disposal of refuse as directed by Engineer-in-charge with in a distance of 60m.

Providing and appling plaster of putty 2mm thickness over plasterd surface to prepare the surface even and smooth complete.

One priming coat and two coat oil bound distemper including supply of all materials, labour and T&P etc.required for proper completion of work.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Sal wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Ply wood 5 ply, 9 mm thick ii- Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type

Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). 21.18

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.21.13

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. 14.34

Supply & fixing of anodised/aluminium portion having 2 mm thick aluminium section excluding coating & an average coating of 20 micron fully glazed made of aluminium door tube size 83.5x44.65 mm as vertical member & 114.00 x 44.45 mm size tube in bottom and horizontal members door chaukhat should be of aluminium tublar vertical with two openable shutters. The rate will include cost of material fixtures, 5 mm glass handles, locks, screw necessary beading & excluding cost of floor spring if required for proper completion of work as per direction of Engineer-in-charge.

Painting or varnishing on iron work in small areas or new wood work with one coat of ready mixed paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc required for proper completion of work

Providing and laying vitrified tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, in skarting, riser of steps over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600mm

Providing andfising 1 qualiity ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, botlle green, black or any size as approved by Engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cment mortar 1:3 (1 cement :3 coarse sand) and jointing with grey cment slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kichen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1cement : 4 coarse sand) joints trated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing , curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade. area of slab over 0.5 sqm

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or Wuropean type water closet (Anglo Indian WC pan) with seat & lid fixed with CP brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. white vireous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and CP flush bend.

Providing and fixing 8 mm dia CP/SS jet with flexible tube upto 1 meter long with SS Triangular plate to Eueopean Type WC of Quality and make as approved by Engineer-in-Charge.

Providing and fixing wash basin with CI brackets, 15 mm CP brass pillar taps, 32 mm cp brass waste of standard paattern, including painting of fittings and brackets, cutting and making good the walls wherever require. white vitreous china wash basin size 630x450 mm with a pair of 15 mm CP brass pillar taps

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore.

Providing and fixing PVC waste pipe for sink or wash basin including PVC wast fittings complete 32 mm dia / 40 mm dia

Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. a) 15mm nominal bore

Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 a) 15mm nominal bore

Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers.

Providing & fixing 15 mm thick densified tegular edged ecofriendly light weight false ceiling tiles of approved texture having size 600x600 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sacion of size 15x24 mm ultraline false ceiling tiles shall have specification as giving below 1-Light eflection 90% 2- Humidity resistance panel upto 95% R.H 3- NRC 0.60 4- Sound absorption EN ISO354 5- Reaction to fire A-2-SI, do as per EN 13501-1 6- Smoke developing rate o.5 % 7- Flame spread rate upto 5% thickness 15 mm 8 weight as 4.5 Kg/sqm 9- white colour .There should be minimum of 1 hanger per 1.5 sqm of ceiling area and 1200 mm cross tees to be fixed between main runner at 600mm center to from 1200x600mm module and 600 mm cross tees fitted centrally between 120mm cross tees to create 600x600mm module. The product shoud be certified in accordance eith quality assurance standard to ISO 9001 and ISO 14001.All the false ceiling panels shall be of non carcinogenic in nature and shall be 100% Biodegredable and 100% recyclable

Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver setcomplete in all respect.. CAT-AAA

M/S WARIS CONSTRUCTION

vajid ali

BHARAT TRADERS