Extension to Building of Primary Health Center Karak Karawali, Tal.Rajapur, For the Year 2025 - 26

Item No. 1 :- Excavation for Foundation in Earth, Soil of All Types, Sand, Gravel & Soft Murum including Removing the Excavated Material upto a Distance of 50 mt. Beyond the Building Area & Stacking & Spreading as Directed, Dewatering, Preparing the Bed for the Foundation & Necessary Back Filling, Ramming, Watering including Shoring & Strutting etc. complete. (Lift upto 1.5 mt) By Mechanical Means.

Item No. 2 :- Providing & Laying Cast in Situ Cement Concrete in M - 10 of Trap Metal for Foundation & Bedding including Bailing Out Water, Steel Centering, Formwork, Laying / Pumping, Compacting, Roughening them if Special Finish is to be Provided, Finishing if Required & Curing complete, with Fully Automatic Micro Processor Based PLC with SCADA Enabled Reversible Drum Type Mixer / Concrete Batch Mix Plant (Pan Mixer) etc. complete. With Fine Aggregate (Crushed Sand V. S. I. Grade)

Item No. 3 :- Providing Laterite Stone Masonry in Cement Mortar 1:6 in Foundations & Plinth including Racking Out Joints when Plastering is to be Done / Striking Joints when No Plastering is to be Done, Watering & Scaffolding.

Item No. 4 :- Providing & Laying Cast in Situ / Ready Mix Cement Concrete M - 20 of Trap Metal for R. C. C. Beams & Lintels as per Detailed Designs & Drawings or As Directed including Steel Centering, Formwork, Cover Blocks, Laying / Pumping, Compaction & Roughening the Surface if Special Finish is to be Provided & Curing etc. complete. (Excluding Reinforcement & Structural Steel) with Fully Automatic Micro Processor Based PLC with SCADA Enabled Reversible Drum Type Mixer / Concrete Batch Mix Plant (Pan Mixer) etc. complete. With Fine Aggregate (Crushed Sand V. S. I. Grade)

Item No. 5 :- Providing & Laying Cast in Situ Cement Concrete M - 20 of Trap Metal for R. C. C. Slabs & Landings as per Detailed Designs & Drawings including Steel Centering, Formwork, Cover Blocks, Laying / Pumping, Compaction, Finishing the Formed Surface with Cement Mortar 1:3 of Sufficient Minimum Thickness to Give a Smooth & Even Surface or Roughening if Special Finish is to be Provided & Curing etc. complete. (Excluding Reinforcement & Structural Steel), with Fully Automatic Micro Processor Based PLC with SCADA Enabled Reversible Drum Type Mixer / Concrete Batch Mix Plant (Pan Mixer) etc. complete. With Fine Aggregate (Crushed Sand V. S. I. Grade).

Item No. 6 :- Providing Sand Faced Plaster Externally in Cement Mortar using Approved Screened Sand in All Positions including Base Coat of 15 mm. Thick in Cement Mortar 1:4 using Water Proofing Compound at 1 Kg. / Cement Bag, Curing the Same for Not Less than 2 Days & Keeping the Surface of the Base Coat Rough to Receive the Sand Faced Treatment 6 to 8 mm. Thick in cement mortar 1:4 Finishing the Surface by Taking Out Grains & Curing for Fourteen Days Scaffolding etc. complete.

Item No. 7 :- Providing Laterite Stone Masonry in Cement Mortar 1:6 in Super Structure including Racking Out Joints when Plastering is to be Done / Striking Joints when No Plastering is to be Done, Watering & Scaffolding.

Item No. 8 :- Providing & Fixing Frame With / Without Ventilator of Size as Specified with Country Non Teak Wood for Doors & Windows including Chamfering, Rounding, Rebating, Iron Holdfast of size 300 mm. x 40 mm. x 5 mm. with Oil Painting etc. complete.

Item No. 9 :- Providing Sills of Polished Kadappa Stone 25 mm. to 30 mm. Thick on a Bed of 1:4 Cement Mortar including Cement Float, Filling Joints with Slurry, Curing, Polishing & Cleaning etc. complete.

Item No. 10 :- Providing & Fixing Country Cut Teak Wood Single Leaf Paneled Door Shutters 35 mm. Thick Style & Rail & 19 mm. Thick T. W. Panels as per Detailed Drawing including Wrought Iron Hold Fast, Stainless Steel Fixtures & Fastening & Three Coats of Oil Painting etc. complete

Item No. 11 :- Providing & Fixing Fiber Glass Reinforced Polyester Door Shutter 30 mm. Thick as per IS 14856 (2000) (Reaffirmed 2006) without Ventilator including Chromium Plated Fixtures & Fastening with Chromium Plated Handles on Both Sides etc. complete

Item No. 12 :- Providing & Fixing in Position (as per I. S.1868 / 1982) Aluminum Sliding Window of Two Tracks with Rectangular Pipe having Overall Dimension 63.50 x 38.10 x 1.02 mm. at Weight 0.547 Kg./Rmt. & Window Frame Bottom Track Section 61.85 x 31.75 x 1.20 mm. at Weight 0.695 Kg./Rmt. Top & Side Track Section 61.85 x 31.75 x 1.30 mm. at weight 0.659 Kg./Rmt. The Shutter should be of Bearing Bottom 40 x 18 x 1.25 mm. at Weight 0.417 Kg./Rmt. Inter Locking Section 40 x 18 x 1.10 mm. at Weight 0.469 Kg./Rmt. & Handle Section 40 x 18 x 1.25 mm. at Weight 0.417 Kg./Rmt. & Top Section 40 x 18 x 1.25 mm. at Weight 0.417 Kg./Rmt. as per Detailed Drawings & as Directed by Engineer In Charge with All Necessary Aluminum Sections Fixtures & Fastenings such as Roller Bearing in Nylon Casting & Self Locking Catch Fitted in Vertical Section of Shutter including 5 mm Thick Plain Glass with All Required Screws & Nuts etc. complete. With Powder Coating Without Box.

Item No. 13 :- Providing & Fixing in Position Powder Coated Aluminum Louvered Windows / Ventilator of Various Sizes with Powder Coating as per Detailed Drawing & Specifications including Aluminum Frames 80.00 mm. x 38.00 mm. x 1.22 mm. Box Type, 5 mm. Thick Sheet Glass Louvers of Approved Quality etc. complete.

Item No. 14 :- Providing & Fixing Mild Steel Grill Work for Windows, Ventilators etc. 15 Kg./Smt. as per Drawing including Fixtures Necessary Welding & Painting with One Coat of Anticorrosive Paint & Two Coats of Oil Painting complete.

Item No. 15 :- Providing & Laying Cast in Situ / Ready Mix Cement Concrete M - 20 of Trap Metal for R. C. C. Chajja as per Detailed Design & Drawings including Steel Centering, Formwork, Cover Blocks, Laying / Pumping, Compacting, Roughening the Surface if Special Finish is to be Provided & Curing complete. (Excluding Reinforcement & Structural Steel) with Fully Automatic Micro Processor based PLC with SCADA enabled Reversible Drum Type Mixer / Concrete Batch Mix Plant (Pan Mixer) etc. complete. With Fine Aggregate (Crushed Sand V. S. I. Grade)

Item No. 16 :- Providing & Fixing in Position TMT - FE - 500 Bar Reinforcement of Various Diameters for R. C. C. Pile Caps, Footings, Foundations, Slabs, Beams, Columns, Canopies, Staircase, Newels, Chajja, Lintels, Pardi, Copings, Fins, Arches etc. as per Detailed Designs, Drawings & Schedules including Cutting, Bending, Hooking the Bars, Binding with Wires or Tack Welding & Supporting as Required complete.

Item No. 17 :- Providing Internal Cement Plaster --- mm Thick in Single Coat in Cement Mortar ---- Without Neeru Finish to Concrete or Brick Surfaces in All Position including Scaffolding & Curing etc. complete. A) 12 mm Thick, C. M

B) 20 mm Thick, C. M Plaster

Item No. 18 :- Providing Internal Cement Plaster 6 mm Thick in a Single Coat in Cement Mortar 1:4 Without Neeru Finish to Concrete Surfaces in all Position including Scaffolding & Curing etc. complete.

Item No. 19 :- Providing & Applying Two Coats of Wall Care Putty on Plastered Surface & Ceiling & Walls to Prepare Surface Even & Smooth of Approved Make etc. complete.

Item No. 20 :- Providing & Applying Plastic Emulsion Paint of Approved Quality, Colour & Shade to Old & New Surfaces in Two Coats including Scaffolding, Preparing the Surface. (Including the Primer Coat) etc. complete.

Item No. 21 :- Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete. NOTE: ForItem One Number 15 to 18 prior approval of Superintending Engineer will be necessary

Item No. 22 :- Providing & Laying Vitrified Mirror / Glossy Finish Tiles Decorative Type having Size 590 mm. to 605 mm. x 590 mm. to 605 mm. of 8 to 10 mm. Thickness & Confirming to I. S. 15622 - 2006 (Group Bla) of Approved Make, Shade & Pattern for Flooring in Required Position Laid on a Bed of 1:4 Cement Mortar including Neat Cement Float, Filling Joints, Curing & Clearing etc. complete.

Item No. 23 :- Providing & Laying Vitrified Mirror / Glossy Finish Tiles having Size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm Thickness & Confirming to I. S. 15622 - 2006 (Group Bla) of Approved Make, Shade & Pattern for Dado & Skirting in Required Position Fixed in 1:4 Cement Mortar including Neat Cement Float, Filling Joints, Curing & Clearing etc. complete.

Item No. 24 :- Providing & Laying Matt Finish Ceramic Tiles of having Size 30 cm. x 30 cm. Confirming to I. S. 15622 / 2006 (Group D II - A) & 7 to 8 mm. Thick for Flooring in Required Position Laid on a Bed of 1:4 Cement Mortar including Cement Float, Filling Joint with White / Colour Cement Slurry, Cleaning, Curing etc. complete.

Item No. 25 :- Providing & Laying Ceramic Tiles of having Size 30 cm. x 30 cm. & Confirming to Corresponding I. S. for Dado & Skirting in Required Position with Readymade Adhesive Mortar of Approved Quality on Plaster of 1:2 Cement Mortar including Joint Filling with White / Colour Cement Slurry, Cleaning, Curing etc. complete.

Item No. 26 :- Providing & Fixing Orissa Type White Glazed Earthenware 575 mm Water Closet Pan including S Trap with Earthenware Foot Rests, Cast Iron Soil & Vent Pipe upto Outside Face of the Wall, 1:2:4 Brick Bat Lime Concrete Bedding without Flushing Tank & its Accessories etc. complete.

Item No. 27 :- Providing & Fixing White Glazed Earthenware Wash Hand Basin of 55 cm. x 40 cm. size including Cold Water Pillar Tap / Cold & Hot Water Pillar Tap Brackets, Rubber Plugs & Brass Chain, Stop Tap & Necessary Pipe connections including P. V. C. Waste Pipe & trap up to the Outside Face of the Wall. Making Good the Damaged Surface, Testing etc. complete.

Item No. 28 :- Providing & Fixing 75 mm. Diameter Stabilizer Pipe / P. V. C. Soil Vent / Waste Pipe & with Necessary Fixtures & Fitting such as Bends, Tees, Single Junctions, Slotted Vent, Clamps etc. complete

Item No. 29 :- Providing, Laying & Fixing P. V. C. Pipe of 15 mm. Diameter with Fittings such as Bends, Tees, Reducers, Clamps etc. including Necessary Excavation, Trench Filling etc. complete including Removing Existing Pipe Line if Necessary & Conveying & Stacking the Same in P. W. D. Chowky or as Directed etc. complete.

Item No. 30 :- Providing & Fixing 15 cm. Rigid P. V. C. Nahani Trap including PVC Grating, Bend, Connecting Piece of U. P. V. C. Pipe up to the Outside Face of Wall, Making the Good Damaged Surface & Testing etc. complete (Prior Approval of Sample & Brand by Ex. Engg. is Necessary before Use)

Item No. 31 :- Providing & Fixing 15 mm. Diameter P. V. C. Type Approved Make Super Bib Tap with Flange including All Accessories etc. complete.

Item No. 32 :- Providing sills of polished Kadappa stone 25 mm to 30 mm thick, on a bed of 1:4 cement mortar including cement float,filling joints with slurry,curing polishing and cleaning etc. complete.

Item No. 33 :- Providing and fixing white glazed earthenware lipped flat back / corner type Urinal with PVC 5 liters flushing cistern with fittings ,inlet pipe with stop tap ,brackets for fixing the cistern ,32 mm diameter P.V.C. flush pipe with fitting including lead soil pipe,lead trap and soil pipe connection up to the outside face of wall.

Item No. 34 :-Providing and fixing White Glazed Earthenware Squatting plate ( Ladies Urinal ) with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern ,32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe,lead trap,soil pipe connection upto the outside face of the wall

Item No. 35 :- Providing Soak Pit of size 120 cm. x 120 cm. x 120 cm. including Excavating & Filling with Brick Bats.

Item No. 36 :- Providing & Fixing in Position U. P. V. C. Ultra Violet Stabilized 110 mm. Outer Diameter Cowl Dome Confirming to I. S. 4985 including Making Joints with Solvent Cement etc. complete

Item No. 37 :- Providing & Fixing Reinforced Cement Concrete Cover of size 60 cm. x 45 cm. with Frame Over Inspection Chamber etc. complete. Medium Duty (100 Kg.)

Item No. 38 :- Providing, Painting & Lettering for Name Board which Describing Details of Such Work etc. complete.

Item No. 39 :- Royalty Charges for Various Material Utilized for this Work

Item No. 40 :- Repayment of Quality Control Material Testing Charges for Various Material Utilized for this Work

1) Cement

1) Standard Consistency, Fineness, Specific Gravity, Setting Time (Initial & Final), Compressive Strength, Soundness etc. Group Test, (SSR P/I 764/1)

2) Fine Aggregate

1) Fineness Modulus (Sieve Analysis), Silt & Clay Content etc. Group Test, (SSR P/I 764/10)

3) Aggregate

1) Water Absorption, Specific Gravity, Impact Value / Crushing Value Test etc. Group Test (SSR P/I 764/2)

4) Stone / Rubble

1) Crushing Value / Compressive Strength, Water Absorption & Specific Gravity etc. Group Test, (SSR P/I 765/28)

5) Steel

1) Tensile Strength, % Elongation, Yield Stress, Weight Per Meter, Bend / Rebend Test, Proof Stress etc. Group Test Upto 16 mm Dia. (Set of 3 Bars) (SSR P/I 766/72)

6) Concrete

1) Compressive Strength of C. C. Cube (Set of 3 Cubes) (SSR P/I 764/19)

Please Enable Macros to View BoQ information