Up Gradation of DFO Residence at Forest Complex Reasi under UT CAPEX FY 2025-26

Amount

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on old work

Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution old work

Chequerred precast cement concrete tiles 22mm thick in footpath on 20 mm thick bed of cement mortar 1:4 Dark shade using ordinary cement

Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws 1 st class kail wood

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

wall to wall carpeting in the room

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades,in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600 mm

Providing and fixing Wiring for light poin/exhaust fan point/ ceiling fan point hesting pointwith 1.5/2.5/4 sqmm FRLS PVC insulated copper conducter single core cable in surface/rocessed medium class PVC conduit, with modular switch,modular plate suitable GI box as required. Make:- Anchor Havells or equvalent.

Power point

CFL saver 14 watt of approved quality Make-Anchor/Havels/Orient etc

providing and fixing 19mm plywood with both side sunmica

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class deodar wood (35mm)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screw (35mm)

GOURAV VERMA (BID ID -2429460)

M/s Joginder Kumar (BID ID -2433456)

AJAZ AHMED (BID ID -2432824)

renu sharma (BID ID -2433253)

Rajeshwar Singh Kalhuria (BID ID -2432832)