WBPHED/AE/CMSD/eNIT04/S22

Amount

Satgachi ph-3

Fault finding for low discharge from pumping machinery by dismantling CIDF items, valves etc. & also checking electrical accessories as per direction of EIC.

Hiring charges of derrick set for withdrawing of pumping machinery as per direction of EIC.

Withdrawing of defective 10 HP submersible pump motor set along with 80 mm dia M.S column pipes by necy. arrangement & skilled labour after disconnection of power line & delivery pipe line as per direction of EIC.

Supply & delivery of following materials -

Carrying charges for Departmental supplied one no. 12.5 H.P submersible pumping machinery set from PHE Office (Purta Bhavan) to above mention pump house for installation including loading and unloading complete as per direction of EIC.

4 sq. mm. 3 core copper 1.1 KV grade PVC insulated water proof flat submersible cable. (Make : Finolex/ Gloster/ Mescab/ Currency/ Netco/ Polycab/ Approved Make)

80mm. dia uPVC column pipe 7.1mm. thick having 70mm. long 8TPI threaded both side with heavy type one socket & 'O' ring biax technology with wiring lock system non corrosive, high tensile having I.S.O. 9001 standard. (Make : Ashirbad/ Oriplast/ Raksha/ Approved Make).

10ft. long (3 mtrs)

Making safety device for above pump by supplying 1" dia nylon rope

Steel Plug, M.S. Nipple, Flange, Nuts, Bolts, gaskets etc

65 mm dia x 150 mm long G.I Short piece

80 X 65 mm dia G.I Reducer

Installation of departmental supply 12.5 H.P submersible pumping machinery with cable, rope etc. for making delivery & washout pipe line and testing the whole installation complete as per direction of EIC.

Satgachi ph-1 & 2 & 3 & 4.

Distribution wiring in 1.1KV. Grade, (2X1.5mm2) single core stranded 'FR' PVC insulated & unsheathed copper wire (approved make) in suitable size PVC casing capping (Precision make) with (1.5 Sqmm) single core stranded 'FR' PVC insulted & unsheathed copper wire for ECC, including necessary PVC clips, fittings etc. to light/fan point with piano key type switch (anchor make) fixed on pvc/sheet steel fabricated switch board with Perspex/bakelite top cover on wall including necessary connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface]

a) average run 4. 5 mtr. -

Supply and delivery of following materials-

200 mm/ suitable sweep Exhust fan (Make: Approve make of P.H.E. Dte.)

Labour charges for fitting fixing of above items and testing complete as per direciton of EIC.

Supply and fitting fixing of 45 watt. LED light fixture set [Make: Philips (Type- BRP)/ Havells/ PHED approved make] with 40 mm dia x 2.5 mtr. long G.I pipe bracket fixed on the roof of the pump house with M.S clamp properly grouting including making power connection with supply & drawing 2.5 sq. mm FR grade flexible copper wire through PVC casing/conduit with drawing earth conductor (1.0 sq mm copper flexible wire), S&F of 15 amp switch with pvc board including electrical connection & testing complete as per direction of EIC. (2 set for each P.H No.- I & II)

Add GST @ 18%

Add Cess @ 1%

RS Electromechanical Corporation (BID ID -6611636)

ELECTRICAL AND MECHANICAL ENGINEERING CORPORATION (BID ID -6611416)