REPAIR/MAINT OF BLACK TOP SURFACES OF CERTAIN INTERNAL ROADS AND ROAD FURNITURES INCLUDING REPAIR TO HARD STANDING, PATH AND PROTECTIVE WORK AT JUTOGH CANTT UNDER GE JUTOGH

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces n exc 50mm deep in area n exc 400 sqm complete all as specified and directed.

M&L for preparing un surfaced water bound macadam by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly priming/tack coat with paving bitumen of Grade VG-10 at 10 Kg per 10 Sqm.complete all as specified and directed.

M&L for Premix bituminous, macadam using paving bitumen any penetration binder content of 4% by weight of total mix, binded with 0.09 cum of stone chippings, 6.3 mm size of grade VG-10 laid/rolled and compacted to required camber and gradient (consolidated thickness 50mm) with power roller 8 to 10 tonne to a uniform smooth surface complete all as specified and directed.

M&L for preparing existing black top surfaces/filled pot hole surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with Air compressure to remove all loose dirt etc in black top surfaces complete all as specified.

M&L for applying evenly priming/tack coat with bituminous primer using Paving bitumen of grade VG- 10 at 5 Kg per 10 Sqm using of mechinical sprayer complete all as specified.

M&L for Bituminous Premix asphaltic semi dense concrete 25 mm consolidated thickness with 5 % binder content using paving bitumen of Grade VG 10 by weight of total mix, spread by means of mechanical paver, rolled and compacted to required camber and gradient with power roller 8 to 10 tonne to a uniform smooth surface complete all as specified.

M&L for Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 30 mm in depth, making good by applying tack coat using paving bitumen of grade VG-10 @ 5 kg per 10 sq m, putting in premixed bituminous macadam, using paving bitumen of grade VG-10, binder content 4% by weight of total mix, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30 mm complete all as specified and directed.

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour white and yellow confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

S&F solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed

S&F cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.complete all as specified and directed.

S&F metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

S&F 50mm wide Radium sticker reflective sticker strip of any colour including removing/sticking at any type of surface and all as specified and directed.

S&F 100 Cms dia convex mirror made up of polycarbonate reflective mirror of ABS body complete with mounting hardware, clamp and GI pipe 65mm dia of required height etc including PCC 1:3:6 type C-2 foundation of size 400x400x600 mm and necessary earth work excavation complete all as specified and directed: Make : 3M India Ltd/Dark Eye/Sun Eye/Gogia Plastics.

Demolition of brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, at any height complete all as specified

M&L for Walling of random rubble,uncoursedwell bonded, built in CM(1:6)as in parapet,steps complete all as specified & directed.

M&L for Walling of random rubble,uncoursedwell bonded, built in CM(1:6)as in parapet,steps except stones complete all as specified & directed.

Taking down plastering of any description and in any position in cement mortar on brick or stone walls etc including racking out joints ,hacking for key,scrubbing down with water etc complete all as specified and directed.

M&L for rendering 20 mm thick on fair faces of stone surfaces in cement mortar 1:4 complete all as specified & directed.

M&L for preparation of new or previously untreated plastered surface and applying Two coats of synthetic enamel paint over priming paint plaster coat on surfaces of any description over 10cm girth or width, not otherwise described complete all as specified and as directed.

M&L for preparation of old painted plastered surface and applying one coat of synthetic enamel paint on surfaces of any description over 10cm girth or width, not otherwise described complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded aggregated) in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throttling, including necessary form work complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in surface channels and drains and mass concrete including necessary form work complete all as specified and directed.

Demolition of Stone slabs and tiles laid beded and pointed in any mortar description or thickness in floors, aprons etc. all as specified and as directed by Engr-in-Charge.

M&L for 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars and top brick/ stone wall in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with 20 mm thick screed bed CM 1:6 complete etc complete all as specified and as directed

M&L for Rounding to edges of stone slabs one edge,such as steps,cooking platform and other any situations all as specified and directed

M&L for surface dressing n exc 15 cm deep in Hard/ dense soil.complete all as specified and directed.

M&L 100mm thickness Moorum /Red bajri spread, rolled and consolidated to gradient and camber required complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C2, using 40 mm gragded crushed aggregate as in plinth protection path etc finished even and smooth without using extra cement complete all as specified and directed..

M&L for 75 mm thick PCC 1:4:8 type D-2 using 40 mm gragded crushed aggregate as in sub base for flooring, complete all as specified and as directed.

M&L for sand filling below paver block complete all as specified and directed

M&L for Machine pressed precast concrete interlocking paver block ,( M-40 Grade ) of any size and shape confirming to IS 15658-2006 of 80 mm thick, with grey cement and pigment etc complete all as specified.

M & L for Chequered cement concrete tiles rubber moulded pre polished with lacquer finish pre polished 30cmx30cmx22-25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors laid over a including 20mm thick screed bed in CM 1:6 Complete all as specified and directed.

M&L for Raised pointing in CM 1:3 to random or polygonal rubble, uncoursed or brought upto courses including Raking out joints/ pointing of cement or cement lime mortar to random rubbel masonry, Complete all as specified and directed.

M & L for brick work with old size kiln burnt sub class 'B' bricks, straight or curved on plan exc 6 m in mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan to any radius in half brick thick wall built complete all as specified.

M & L for rendering 15 mm thick on fair surfaces of brickwork or concrete surface in CM(1:4) finished even and smooth (without using extra cement) complete all as specified.

M&L for preparation of new or previously untreated plastered surface and applying Two coats cement base paint complete all as specified and as directed.

R. P. Suppliers and Construction Co.