Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹26.5 LAccepted-Finance | L-1 | Accepted-Finance FIT | |
| 2 | L-2₹28.1 L+₹1.6 L (6.21%)Accepted-Finance JAMMU PYRAMID CONSTRUCTIONS SAINIK COLONY JAMMU JAMMU 29 SECTOR SAINIK COLONY JAMMU JAMMU KASHMIR 180011 | JAMMU | JAMMU AND KASHMIR | 180011 | L-2 | Accepted-Finance FIT | |
| 3 | L-3₹21.8 L−₹4.7 L (17.8%)Accepted-Finance C O SECTOR 02 HOUSING COLONY CHANNI HIMMAT JAMMU J K PIN 180015 | JAMMU | JAMMU AND KASHMIR | 180015 | L-3 | Accepted-Finance FIT | |
| 4 | L-4₹36.1 L+₹9.6 L (36.2%)Accepted-Finance | L-4 | Accepted-Finance FIT | |
| 5 | L-5₹47.9 L+₹21.4 L (81.0%)Accepted-Finance | L-5 | Accepted-Finance FIT |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
13 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh Tanuj Bagla, EE
GE Kaluchak Pin-900673 C/O 56 APO
REPAIR AND MAINT TO EXTERNAL WATER SUPPLY DISTRIBUTION AND INSTALLATION AT RATNUCHAK MIL STN UNDER GE KALUCHAK
2023_MES_632736_1
GE/KC/NIT-58/2023-24
Open Tender
Civil Works
Item Rate
270 days
Kaluchak
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE kaluchak
₹80,000
Yes
27 Feb 2024
16 Dec 2023
15 Jan 2024
16 Dec 2023
13 Jan 2024
30 Dec 2023
16 Dec 2023 - 23 Dec 2023
Amount
15mm bore GI Socket medium grade ISI Marked including dismantling of old unserviceable GI socket, complete all as specified & directed.
20mm bore GI Socket medium grade ISI Marked including dismantling of old unserviceable GI socket, complete all as specified & directed.
25mm bore GI Socket medium grade ISI Marked including dismantling of old unserviceable GI socket, complete all as specified & directed.
40mm bore GI Socket medium grade ISI Marked including dismantling of old unserviceable GI socket, complete all as specified & directed.
50mm bore GI Socket medium grade ISI Marked including dismantling of old unserviceable GI socket, complete all as specified & directed.
15mm bore GI Elbow medium grade ISI Marked including dismantling of old unserviceable GI elbow, complete all as specified & directed.
20mm bore GI Elbow medium grade ISI Marked including dismantling of old unserviceable GI elbow, complete all as specified & directed.
25mm bore GI Elbow medium grade ISI Marked including dismantling of old unserviceable GI elbow, complete all as specified & directed.
40mm bore GI Elbow medium grade ISI Marked including dismantling of old unserviceable GI elbow, complete all as specified & directed.
50mm bore GI Elbow medium grade ISI Marked including dismantling of old unserviceable GI elbow, complete all as specified & directed.
15mm bore GI long bend medium grade ISI Marked including dismantling of old unserviceable GI long bend, complete all as specified & directed.
20mm bore GI long bend medium grade ISI Marked including dismantling of old unserviceable GI long bend, complete all as specified & directed.
25mm bore GI long bend medium grade ISI Marked including dismantling of old unserviceable GI long bend, complete all as specified & directed.
15mm bore GI union medium grade ISI Marked including dismantling of old unserviceable GI union, complete all as specified & directed.
20mm bore GI union medium grade ISI Marked including dismantling of old unserviceable GI union, complete all as specified & directed.
25mm bore GI union medium grade ISI Marked including dismantling of old unserviceable GI union, complete all as specified & directed.
40mm bore GI union medium grade ISI Marked including dismantling of old unserviceable GI union, complete all as specified & directed.
50mm bore GI union medium grade ISI Marked including dismantling of old unserviceable GI union, complete all as specified & directed.
15mm bore GI nipple of different length as per requirement, both end screwed, medium grade ISI Marked including dismantling of old unserviceable GI nipple, complete all as specified & directed.
20mm bore GI nipple of different length as per requirement, both end screwed, medium grade ISI Marked including dismantling of old unserviceable GI nipple, complete all as specified & directed.
25mm bore GI nipple of different length as per requirement, both end screwed, medium grade ISI Marked including dismantling of old unserviceable GI nipple, complete all as specified & directed.
40mm bore GI nipple of different length as per requirement, both end screwed, medium grade ISI Marked including dismantling of old unserviceable GI nipple, complete all as specified & directed.
50mm bore GI nipple of different length as per requirement, both end screwed, medium grade ISI Marked including dismantling of old unserviceable GI nipple, complete all as specified & directed.
20mm x 15mm bore GI reducing socket medium grade ISI Marked including dismantling of old unserviceable GI reducing socket, complete all as specified & directed.
25mm x 20mm bore GI reducing socket medium grade ISI Marked including dismantling of old unserviceable GI reducing socket, complete all as specified & directed.
15mm x 15mm x 15mm bore GI Tee, medium grade ISI Marked including dismantling of old unserviceable GI Tee, complete all as specified & directed.
20mm x 20mm x 20mm bore GI Tee, medium grade ISI Marked including dismantling of old unserviceable GI Tee, complete all as specified & directed.
25mm x 25mm x 25mm bore GI Tee, medium grade ISI Marked including dismantling of old unserviceable GI Tee, complete all as specified & directed.
15mm bore GI solid plug, heavy duty, ISI Marked including dismantling of old unserviceable solid plug, complete all as specified & directed.
20mm bore GI solid plug, heavy duty, ISI Marked including dismantling of old unserviceable solid plug, complete all as specified & directed.
25mm bore GI solid plug, heavy duty, ISI Marked including dismantling of old unserviceable solid plug, complete all as specified & directed.
Notes for Srl Item No.1 to 31 (i) Any material required for attending complaints shall be measured and paid under respective item here-in-before. (ii) The complaints shall be attended and the defects shall be rectified by a team of expert and experienced plumber/pipe fitter as directed. (iii) The complaints shall be attended and defect shall be rectified within 08 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 100/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from contractor's dues. Contractor rep shall be available wef 0800 Hrs to 2000 Hrs to receive and notify the complaint. (iv) In case, after checking and attending the defect, it is not possible to rectify the defects within 08 Hrs the facts shall be brought to the notice of Engineer-in-charge by the contractor /his rep. If Eng-in-charge is satisfied with contractors view, no recovery will be made. (v) Cutting of GI pipe in position and threading is also deemed to be included in the unit rate of the respective item No. 1 to 31. (vi) The pipe fitter shall always be in possession of die set complete with cutters, taps, pipe wrench, chain wrench, caulking tools, complete set of spanners and ladders etc., as required at site. (vii) The complaints for the above work shall be collected by contractor rep from MES maint incharge / JE E/M on daily basis.
Run lead including spurn yarn suitable for 80mm bore CI/DI pipe including taking out old unserviceable run lead / spurn yarn, complete all as specified & directed.
Run lead including spurn yarn suitable for 100mm bore CI/DI pipe including taking out old unserviceable run lead / spurn yarn, complete all as specified & directed.
Run lead including spurn yarn suitable for 150mm bore CI/DI pipe including taking out old unserviceable run lead / spurn yarn, complete all as specified & directed.
Run lead including spurn yarn suitable for 200mm bore CI/DI pipe including taking out old unserviceable run lead / spurn yarn, complete all as specified & directed.
Notes for Srl Item No. 32 to 35 (i) Any material such as lead, spun yarn, CI specials, lead joints, D-joints, mechanical joints, clamps, joints etc required for attending complaints shall be measured and paid under relevant items. (ii) The complaints shall be attended and the defects shall be rectified by a team of expert and experienced plumber/pipe fitter as directed. (iii) The complaints shall be attended and defect shall be rectified within 08 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 100/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from contractor's dues. Contractor rep shall be available wef 0800 Hrs to 2000 Hrs to receive and notify the complaint. (iv) In case, after checking and attending the defect, it is not possible to rectify the defects within 08 Hrs the facts shall be brought to the notice of Engineer-in-charge by the contractor /his rep. If Eng-in-charge is satisfied with contractors view, no recovery will be made. (v) Cutting/ welding/ connecting of CI/DI pipe in position and threading for insertion CI/DI specials and fittings is also deemed to be included in the unit rate of the respective item No. 32 to 35. (vi) The pipe fitter shall always be in possession of die set complete with cutters, taps, pipe wrench, chain wrench, caulking tools, complete set of spanners and ladders etc., as required at site. (vii) The complaints for the above work shall be collected by contractor rep from MES maint incharge / JE E/M on daily basis.
Lifting defective submersible pumpset, column pipes (any number) from bore well (any depth/size), setting aside and stacking column pipes for reuse, lowering of submersible pumpset alongwith column pipes in the bore well as existing and making water and electrical connections as existing for running of pump motors, complete all as specified & directed. Notes : (i) Rubber gasket, nut, bolts, washer shall be measured and paid for separately under appropriate item as 'Supply only' of this schedule. (ii) Lifting / lowering shall be measured and paid only once for same nature of repair. (iii) Contractor shall attend and rectify the breakdown within 8 hours failing which a recovery of Rs 500/ hour shall be effected. (iv) In case the submersible pump set falls down during Extn/ Lowering/ Lifting, No extra payment to be made to the contractor for this work.
Supply only rubber gasket required against Serial Item No 36 here-in-before as per existing dia, complete all as specified & directed.
Supply only nut and bolt and washer required against Serial Item No 36 here-in-before as per existing dia and length, complete all as specified & directed.
Repairs to submersible pumpset of capacity 30 to 35 HP, 3 phase, 415 volts involving of following operations :- (a) Opening of the defective motor in MES yard / Pump House/ Workshop ( as approved by GE), cleaning the covers and parts as applicable in presence of Engineer-in-Charge to ascertain the quantum of defects and repairs involved. (b) Transporting the defective motor to contractor's workshop for repairs as directed by the Engineer in Charge and carrying out the necessary repairs including replacement of defective unserviceable parts. (c) Assembling the motor after repair. (d) Spray painting the repaired motor externally with two coats of synthetic enamelled paint of shade as approved by the Engineer-in-Charge. (e) Transporting the repaired motor to MES yard/ Pump House and carrying out necessary test in presence of Engineer-in-Charge to establish the functionability of the repaired motor up to the entire satisfaction of the Engineer-in-Charge.
All as per Srl item No.39 above but submersible pumpset of capacity 20 to 25 HP.
All as per Srl item No.39 here-in-before but submersible pumpset of capacity 15 to 17.5 HP.
All as per Srl item No.39 here-in-before but submersible pumpset of capacity 10 to 12.5 HP.
All as per Srl item No.39 here-in-before but submersible pumpset of capacity 5 to 7.5 HP.
Notes for Serial Item No 39 to 43 here-in-before : (i) Any parts required to be replaced during servicing, overhauling of motor, pump set etc. shall be measured and paid for separately under appropriate item as 'Supply only' of this schedule. However labour element involved in replacement is deemed to be included in quoted rates against these items. (ii) Any minor repairs involved to make the motor, pump functional even if notified by the Engineer-in-Charge shall be carried out by the contractor without any extra cost to the department. (iii) Rewinding of stator of motor, any machine to pump where involved shall be measured and paid for separately against relevant item of this schedule. (iv) Greasing/oiling etc of parts as required shall be done by the contractor without any extra cost to the department..
Supply only the following items to be incorporated against Serial Item No 39 to 43 above, suitable for submersible pumpset of capacity 5 HP to 35 HP of existing make, complete all as specified & directed :
Water lubricant seal suitable for motor
Bowl assembly
T-bolt for motor
Thrust bearing for motors as per existing
MS Flanged reducer as per existing
Stud as per existing size
Neck ring
Stainless steel key for impeller shaft
Impeller ( CI)
Stainless steel motor - pump coupler
Bush (gun metal) for pump as per existing
Bush (rubber) for pump as per existing
Repair to pump shaft
Repair to motor shaft
Bush to motor shaft as per existing
Repair to impeller by brazing or as required for 5 to 35 HP Pump set complete all as specified and directed.
Sand guard
Motor adaptor
Impeller sleeve(SS)
Rewinding of stator/rotor of submersible motor pump working on three phase 415 Volt to 440 Volts, 50HZ of capacity 5 - 7.5 HP with water proof insulated copper wire of existing gauge (IS:8783:1995) and size to achieve the specified / required RPM /discharge including taking out old unserviceable winding, complete all as specified & directed.
Rewinding of stator of submersible motor pump working on three phase 415 Volt to 440 Volts, 50HZ of capacity 10 - 12.5 HP with water proof insulated copper wire of existing gauge (IS:8783:1995) and size to achieve the specified / required RPM /discharge including taking out old unserviceable winding, complete all as specified & directed.
Rewinding of stator of submersible motor pump working on three phase 415 Volt to 440 Volts, 50HZ of capacity 15 - 17.5 HP with water proof insulated copper wire of existing gauge (IS:8783:1995) and size to achieve the specified / required RPM /discharge including taking out old unserviceable winding, complete all as specified & directed.
Rewinding of stator of submersible motor pump working on three phase 415 Volt to 440 Volts, 50HZ of capacity 20 - 25 HP with water proof insulated copper wire of existing gauge (IS:8783:1995) and size to achieve the specified / required RPM /discharge including taking out old unserviceable winding, complete all as specified & directed.
Rewinding of stator of submersible motor pump working on three phase 415 Volt to 440 Volts, 50HZ of capacity 30 - 35 HP with water proof insulated copper wire of existing gauge (IS:8783:1995) and size to achieve the specified / required RPM /discharge including taking out old unserviceable winding, complete all as specified & directed.
Servicing/ overhauling of centrifugal pump, monoblock motor pump set up to the capacity of 300 gallons/ min of 35 m head, 2900 RPM coupled with 25 to 40 HP 3 phase, 415 V, 50HZ induction motor including carrying out maintenance check along with following repairs :- (a) Dismantling of monoblock motor pump set in presence of MES representative and display all the parts without damage any portion for inspection of Engineer-in-Charge to ascertain the serviceability of existing parts. (b) Heating, varnishing to stator, rotor with super quality varnish and drying out properly with external heat. (c) Cleaning, washing of bearing and use right quantity of ball bearing grease for bearing. (d) Checking play of impeller and bushing of pump. (e) Assembling of motor with old serviceable parts and replacement of unserviceable parts with new as ordered where necessary. (f) Installation of motor by making connections as per existing and testing on load. (g) Cost for loading/ unloading, any type of T&P like chain pulley/ crane or any transportation required to take the centrifugal pump or motor of any size and capacity to workshop (as approved by GE) and back shall be deemed to be included in this item.
All as per Serial Item No 50 above but centrifugal pump, monoblock motor pump set of capacity 12000 gallons/ hr of 80-100 m head, 2900 RPM coupled with 60 to 75 HP induction motor.
All as per Serial Item No 50 here-in-before but for centrifugal pump, monoblock motor pump set of capacity 15000 gallons/hour of 100 -125 m head, 1450/2900 RPM coupled with 100-125 HP.
Notes for Serial Item No 50 to 52 :- (i) Any parts required to be replaced during servicing, overhauling of motor, pump set etc shall be measured and paid for separately under appropriate item as 'Supply only' of this schedule. However labour element involved in replacement is deemed to be included in quoted rates against this item. (ii) Any minor repairs involved to make the motor, pump functional even if notified by the Engineer in Charge shall be carried out by the contractor without any extra cost to the department. (iii) Rewinding of stator, replacement of old unserviceable bearings of pumps and motors, any machine to pump where involved shall be measured and paid for separately against relevant item of this schedule. (iv) Greasing / oiling etc of parts as required shall be done by the contractor without any extra cost to the department.
Rewinding of stator of induction motor working on 3 phase, 440 volts, 50HZ for centrifugal monoblock motor pump set of capacity 25 HP with bare copper winding of appropriate gauge recommended by OEM and as approved by GE, complete all as specified & directed.
Rewinding of stator of induction motor working on 3 phase, 440 volts, 50 HZ for centrifugal monoblock motor pump set of capacity 60 HP with bare copper winding of appropriate gauge recommended by OEM and as approved by GE, complete all as specified & directed.
Rewinding of stator of induction motor working on 3 phase, 440 volts for centrifugal monoblock motor pump set of capacity 75 HP with bare copper winding of appropriate gauge recommended by OEM and as approved by GE, complete all as specified & directed.
Rewinding of stator of induction motor working on 3 phase, 440 volts for centrifugal monoblock motor pump set of capacity 100-125 HP with bare copper winding of appropriate gauge recommended by OEM and as approved by GE, complete all as specified & directed.
Supply only the following items to be incorporated against Serial Item No 53 to 56 above, suitable for centrifugal monoblock motor pumpset of capacity 25 HP to 125 HP of existing make, complete all as specified & directed :-
Body Spacer Bush
Gland shaft sleeve (SS) suitable for pump of capacity 25HP capacity as per site.
Gland shaft sleeve (SS) suitable for pump of capacity 60-75HP capacity as per site.
Gland shaft sleeve (SS) suitable for pump of capacity 100-125HP capacity as per site.
Ball/Thrust bearing Nos NU 208 K suitable for different pump motor of 25 - 60HP capacity as per site.
Ball/Thrust bearing Nos NU 210 K suitable for different pump motor of capacity as per site.
O Ring Cart Part No. 52201/ 52203/ 52202
Oil seal (DE & NDE) as per existing
Ball/Thrust DE bearing Nos NU 307 suitable for different pump motor of capacity as per site.
Ball/Thrust DE bearing Nos NU 306 suitable for different pump motor of capacity as per site.
Ball/Thrust DE bearing Nos NU 308 suitable for different pump motor of capacity as per site.
Ball/Thrust DE bearing Nos NU 309 suitable for different pump motor of capacity as per site.
Ball/Thrust DE bearing Nos NU 310 suitable for different pump motor of capacity as per site.
Ball/Thrust DE bearing Nos NU 319 suitable for different pump motor of capacity as per site.
Ball/Thrust DE bearing Nos NU 411 suitable for different pump motor of capacity as per site.
Ball/Thrust DE bearing Nos NU 412 suitable for different pump motor of capacity as per site.
Ball/Thrust bearing Nos 6305 suitable for different pump motor of capacity as per site.
Ball/Thrust bearing Nos 6306 suitable for different pump motor of capacity as per site.
Ball/Thrust bearing Nos 7308 suitable for different pump motor of capacity as per site.
Ball/Thrust bearing Nos 7309 suitable for different pump motor of capacity as per site.
Ball/Thrust bearing Nos 7310 suitable for different pump motor of capacity as per site.
Ball/Thrust bearing Nos 7311 suitable for different pump motor of capacity as per site.
Ball/Thrust bearing Nos 7312 suitable for different pump motor of capacity as per site.
Ball/Thrust bearing Nos 7313 suitable for different pump motor of capacity as per site.
Ball/Thrust bearing Nos 7315 suitable for different pump motor of capacity as per site.
Ball/Thrust bearing Nos 7316 suitable for different pump motor of capacity as per site.
Ball/Thrust bearing Nos 6316 suitable for different pump motor of capacity as per site.
Ball/Thrust bearing Nos 6311 suitable for different pump motor of capacity as per site.
Thrust plate set of CI.
Bearing protection water shallenger
Brg bracket for 25 to 50 HP Pump motor set
Brg bracket for 60 to 125 HP Pump motor set
Neck ring
Body bush
Stud with nut of any size
Pump Shaft welding and machining
High quality plastic/ rubber coupling having No. TC-15, TC-17, TC-19 or star coupling as required at site suitable for coupling of motor pump of different cap varying from 25 HP to 125 HP and all as specified.
Gland packing as per existing size
Gland Bush with gland plate as per existing size
Coupling bolt
Coupling set
Tyre coupling as per existing
Pin bush coupling (as per existing OEM design)
Column pipe made of MS pipe 100mm bore, heavy duty, ISI marked, 3 Mtr length each welded with MS flanged drilled for nut bolt and washer including rubber gasket 3 mm thick, complete all as specified & directed.
PVC insulated and sheathed flat 3 core, 10 Sqmm copper stranded conductor water proof submersible cable fixed to submersible monoblock pump set to starter as directed including testing & taking out old unserviceable cable, complete all as specified & directed.
PVC insulated and sheathed flat 3 core, 16 Sqmm copper stranded conductor water proof submersible cable fixed to submersible monoblock pump set to starter as directed including testing & taking out old unserviceable cable, complete all as specified & directed.
Cast lron sluice valve, non-rising type conforming to IS:14846-2000 of 150 mm bore consisting of SS spindle as per IS:6603, cast iron body, dome & wedge as per IS:210, greasy jute type gland packing, fasteners as per IS:1367, natural rubber gasket, CI manual hand wheel etc, complete double end flanged and drilled, of Class PN-1 ( ISI marked) including all jointing materials such as rubber gasket insertion sheet nuts, bolts and washers etc, testing, taking out old unserviceable sluice valve from pipeline and removing from site, complete all as specified & directed.
Cast iron non return valve, single door confirming to IS:5312, Part-1 / BS EN 12334 (BS:5153) of 150mm bore, class PN 1.6 gun metal sheat and flap with flanged and drilled flanged ends including having bypass arrangement, complete all as specified & directed .
Cast iron non return valve, single door confirming to IS:5312, Part-1 / BS EN 12334 (BS:5153) of 100mm bore, class PN 1.6 gun metal sheat and flap with flanged and drilled flanged ends including having bypass arrangement, complete all as specified & directed .
Gun metal gate valve confirming to IS : 554/ BS21/ ISO 7 with iron wheel head screwed both ends for iron pipe including taking down old unserviceable valve, complete all as specified & directed for the following sizes :-
25mm bore
40mm bore
50mm bore
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out in any type of soil for water supply pipe line etc complete all as specified & directed. Note : Due care shall be taken while deciding cable route for excavation. However any damage to Signal, BSNL, MES cable water/sewage pipe or any other service while excavation will be made good by the contractor and cost of the same for jointing material & labour is deemed to be included in the cost of excavation.
Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, complete all as specifed & directed.
Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified & directed.
Taking out cast iron water main/ ductile iron pipe line (including all fittings) with spigot and socket ends/ flanged pipes including burning out lead joints and recovering lead and removing to store for reuse, complete all as specified & directed for the following sizes :- Note : Earth work shall be measured and paid for separately under respective items.
80mm bore
100mm bore
150mm bore
Ductile iron pipe, socket & spigot with bulb type rubber tyton gasket and jointing material as per standard complete of class K-7 confirming to IS: 8329:2000 (latest revision), ISI marked laid in trenches/ fixed on pedestals etc including complete mortar lining (CML) and outside black bitumen coating etc complete all as specified & directed for the following sizes :- Note: Earth work & DI fittings will be measured and paid for separate under respective items.
80mm bore
100mm bore
150mm bore
Cast iron/ Ductile iron fittings confirming IS:9523 2000 of class K-12, PN-10 for spigot and socket pipe such as bends (any type, radius and angle), tapers any type (straight, bend, radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc),Tee pieces single branch,Y junction, double branch, cross (all sockets or socket and spigot) collars caps and plugs upto 200 mm bore pipes, complete all as specified & directed Note : Earth work shall be measured and paid for separately under respective items.
Taking out existing old unserviceable /rusted / broken galvanised iron water main pipe line including all fittings, complete all as specified & directed for the following sizes :- Note : Earth work shall be measured and paid for separately under respective items.
20mm bore
25mm bore
40mm bore
50mm bore
80mm bore
100mm bore
Galvanised iron medium grade water tubing with all fittings and fixtures (ISI marked) confirming to IS:1239, laid in trenches or fixed on wall or in any position including necessary saddles and iron clamps, complete all as specified & directed for the following sizes :- Note: The work shall be carried out at various locations under GE Kaluchak on external building walls upto a height of 4th story. Cost of necessary scaffolding arrangement shall be deemed included in the unit rate for these items.
20mm bore
25mm bore
40mm bore
50mm bore
80mm bore
100mm bore
PCC 1:4:8, nominal mix, type D-2 using 40mm graded crushed stone aggregate as in foundations, filling, mass concrete, pipe line supports etc complete all as specified & directed.
Carrying out physical, chemical & bacteriological analysis all as per IS:10500 - 2012 for drinking water (Fresh potable/ raw water from Pump Houses at various locations under GE Kaluchak) from approved govt or other approved labs, complete all as specified & directed. Notes : (a) The rate quoted deemed to inclusive of collecting and transporting water sample in sterilised bottle/ PVC container & submitting the same for testing on same day. (b) Water sample from one borewell will be considered as one job.
Repacking stuffing box of sluice valve spindle, replacement of worn out check nuts, repairs to gate assembly, replacement of jointing materials such as rubber gasket, nuts, bolts and washers gland rope including taking apart and reassembling for 80mm bore, complete all as specified & directed.
Repacking stuffing box of sluice valve spindle, replacement of worn out check nuts, repairs to gate assembly, replacement of jointing materials such as rubber gasket, nuts, bolts and washers gland rope including taking apart and reassembling for 100mm bore, complete all as specified & directed.
Repacking stuffing box of sluice valve spindle, replacement of worn out check nuts, repairs to gate assembly, replacement of jointing materials such as rubber gasket, nuts, bolts and washers gland rope including taking apart and reassembling for 150mm bore, complete all as specified & directed.
Repacking stuffing box of sluice valve spindle, replacement of worn out check nuts, repairs to gate assembly, replacement of jointing materials such as rubber gasket, nuts, bolts and washers gland rope including taking apart and reassembling for 200mm bore, complete all as specified & directed.
Painting of pump motor, rising mains, delivery mains and distribution header, distribution diagrams which includes sluice valves, NRV fittings, sockets, elbows etc , rising mains of overhead tanks, overflow mains, delivery mains of overhead tanks with color coding of various tubewell installations as directed and specified by Engr in charge (Rate quoted will be composite of material, labour and T&P throughout the periodicity as and when required)
M&L for chlorine test kit with coloured sample complete with all testing fitments and OT solution in rexene finish box. Make: Rmco KOLKATA
Taking out sluice valves ,refacing,regrinding ,threading and refixing for 80mm bore all as directed.
Taking out sluice valves ,refacing,regrinding, threading and refixing for 100mm bore all as directed.
Taking out sluice valves ,refacing,regrinding, threading and refixing for 150mm bore all as directed.
Taking out sluice valves ,refacing,regrinding,threading and refixing for 200mm bore all as directed.
M&L for packing glands of size 6-10mm complete all as specified and as directed.Make: Spitmaan/ champion
M&L for packing glands of size 11-25mm complete all as specified and as directed.Make: Spitmaan/ champion
Pyramid constructions
MAMTA ENTERPRISES
Warne Builders
M/S S K Electricals Regd
M/S SHREE KRISHANA ENERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .