GE 861 EWS-46/2021-2022

Amount

Excavation in trenches n exc 1.50m wide and n exc 1.50m in depth for foundation etc or for shaft wells, cesspits manholes, pier holes,poles/stays/cable etc n. exc 10 sqm on plan and n. exc 1.5m in depth and getting out in any type of soil, complete all as specified and directed.

Removing of surplus soil to a distance n exc 50 mtr and depositing where directed at a level n exc 1.5 mtr above the starting point, complete all as specified and directed.

Returning filling in (soil) including spreading, levelling , watering and well ramming in layers n exc 25cm thick, complete all as specified and directed.

PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified.

M&L for brick work with sub class 'B' brick straight or curved on plain exceeding 6m mean radius built in CM 1:6 complete all as specified and directed. Including demolition

Description all as srl item No 5 above but except bricks complete all as specified and directed.

M&L Hardcore broken stone or bolder of gauges exc 63mm but n exc 100mm deposited spread and levelled oin layers n exc 15cm thick watered and rolled/rammed to a true surface complete all as specified.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound finished even and fair without using extra cement complete complete all as specified. Note:Water proofing compound shall be measured and paid separately

Supply only water proofing compound all as specified and directed.

M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L Rendering 5mm thick in cement mortar 1:3 on fair faces of concrete surfaces finished even and smooth without using extra cement complete complete all as specified

M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint over a coat of primer , complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying three coats of white wash on walls complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.

75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of floor, complete all as specified and directed.

25 mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded crused stone aggregate) as in floors to recieve floor finishes, complete all as specified.

Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as spcified and directed.

Glazed ceramic coloured tiles 450mm x 300mm x 7mm thick as in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed.

S&F Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to in stiles & rails with suitable PVC sheet beading and joinned together with solvent cement supplying & fixing in frames at site as per specification and drawing shown in SSR Part -II, complete all as specified and directed.

S&F 200mm long, aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed

S&F 150mm long, extruded aluminium alloy handles, fabricated type, anodised, all as specified and directed.

S&F 100 mm long, mild steel cold rolled Butt hinges, medium weight, complete all as specified and directed.

M&L for 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed, worught, framed rebated on the solid, rounded of chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S&F 35mm thick factory made shutter plain framed, panelled shutter (two panel ) with lock rail and panel 12 mm veneered particle board with commercial veneeringon both faces. The size of rail and style as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated 2nd class HW rail and style complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

S&F 250mm size aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.

S&F steel ventilator with top hung shutters including hinges ,steel peg stay complete all as specified and directed.

S&F Mild steel framed works such as grills, framed guard bars, etc. and similar work conforming to Fe 290 Gde E-165, including bending, cutting and welding as required, complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.

M&L for 4mm thick figured glass,pin head type and glazing with oil putty in squares not exceeding 0.5sq.m in each pane complete all as specified and directed.

S&F 10 litre capacity PVC valveless, low level, synphonic action type, flushing cistern, with inlet, ball valve, float valve, handle including brackets, complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 600mm, complete all as specified and directed.

S&F grating square 150mm size of PTMT(Minimum weight 50gms) complete all as specified and directed.

S&F 110mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors etc, complete all as specified and directed.

S&F 75mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors etc, complete all as specified and directed.

S&F 75mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls etc, complete all as specified and directed.

S&F 110mm bore dia PVC (SWR) bends, complete all as specified and directed.

S&F 75mm bore dia PVC (SWR) bends, complete all as specified and directed.

S&F 75mm bore pipe PVC (SWR) vent cowl and fixed, complete all as specified and directed.

S&F PVC (SWR) floor trap 75mm bore dia with grating setting and jointing ton waste pipe fixed in cement concrete type B-1(1:2:4) complete all as specified and directed.

S&F Rotational moulded polythylene 500 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position complete all as specified

S&F 20 mm ball valve high pressure of PTMT with epoxy coated alu rod & high density plastic ball complete all as specified and directed.

S&F Mild steel galvanised iron water tubing 15 mm bore with screwed & socket joints, medium grade with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. fixed to wall or ceiling or laid in floor complete, all as specified and directed.

S&F Mild steel galvanised iron water tubing 20 mm bore with screwed & socket joints, medium grade with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. fixed to wall or ceiling or laid in floor complete, all as specified and directed.

Supply, fixing, jointing and testing, ISI Marked, of approved quality, gun metal globe/gate valve 20mm dia with iron wheel head, both ends screwed for iron pipe complete all as specified and directed.

S&F 15mm bore bib tap, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule,complete all as specified and directed

S&F 15mm dia pillar taps,fancy type, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered 'Hot' and 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F 15mm bore stop valves, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union, complete all as specified and directed

S&F vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern) including provision of lime concrete bedding with P trap and connection to drain and to flushing pipe anti syphonage pipe complete all as specified and directed

S&F for vitreous china wash basin, white, flat back, size 630x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified.

S&F Vitreous china bowl urinal flat back, size 465 x 355 x 265 mm, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

M&LGranite(of any type) slab 20 mm thick machine cut ,bedded and jointedwith grey cement and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including screed bed/bedding layers 15mm thick in cement mortar 1:6 all as specified and directed .

M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

M&L RCC M-25 design mix using 20 mm graded aggregate as in slab supported on walls, beams and columns in floors, roofs landings balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L RCC M-25 design mix using 20 mm graded aggregate as in Beams, cantilevers, bressummers lintels over 1.5 m span complete all as specified and directed.

Form work to sides and soffits of suspended slab such as roof slab, floor slab, shelves and similar works n. exc. 200 mms thick (Horizontal or sloping), finishing rought the concrete surfaces, complete all as specified and directed.

Form work to sides and soffits of floor or roof beam haunching , lintels, cantilevers shelved including supports overhangs etc also splays between floors and beams, etc complete all as specified and directed.

M&L MS TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified and directed.

M&L MS TMT bars 8 mm dia and over cut to length, bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not les than 0.9 mm dia or securing with clips quality conforming to complete all as specified and directed.

M&L MS TMT Bars of 5 mm dia and over up to 10 mm dia in stirrups, spacers and binders, cut to length bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Soft/loose soil, complete all as specified and directed.

M&L Chequered cement concrete tiles of size 300mm x 300mm x 25 mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid in floors, over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

Excavating over areas, not exceeding 1.5 m deep and getting out Soft / loose soil complete all as specified and directed

Description all as srl item No 65 above but exc 1.5m but n exc 3.00m complete all as specified and directed.

100mm thick PCC 1:2:4 type B-1(using 20mm graded stone aggregate) as in floor finished even and smooth without using extra cement complete all as specified and directed.

M&L Brick work with old size bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan to any radius in half brick thick honey comb walls built in cement mortar 1:4, all as specified.

M&L Brick work with old size bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6, all as specified.

M&L Plain cement concrete type B1 1:2:4 (using 20mm graded curshed stone aggregate) cast in situ lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and necessary form work all as directed.

Precast cement concrete type 1: 2: 4, type-B1 (20 mm graded aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, hangers, shelves and similar articles with plain faces, set and jointed in CM 1:4, complete all as specified and directed.

Plain cement concrete bed 1:4:8 type D-2 (using 40mm graded crushed stone aggregates)to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore pipe, complete all as specified and directed.

M&L Salt glazed stone ware drain pipe of 150mm bore (internal bore) garde 'A' laid in trenches and jointed, complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide to rough finished surfaces of concrete, complete all as specified and directed.

Demolition of cement concrete (Unreinforced) in ground floor and paving n exc 15 cm thick below or above ground level complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles, all as specified .

M&L 25mm thick damp proof course course to horizontal or vertical surfaces including necessary formwork in cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate all as spd and directed.

M&L for 15mm thick rendering on stone surfaces or surface other than fair face of brick work work in CM 1:4 finished the surface even and smooth without using extra cement, complete all as specified and directed.

Dismantling floor hearth or wall tiling, chequered cement concrete tiles incl cement mortar bedding (but not backing) complete all as specified and directed.

Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as spcified and directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each, complete all as specified and directed.

M&L for cutting holes in brick walls in mud mortar for inserting holdfasts and making good dismantled portion in cement motar 1:3 or cement concrete 1:2:4 type B-1 complete all as specified and directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required ; hooks (stay),heavy, for large gates ; hook and pintle hinges ; large hasps and staples ; chains ; hand made slinding bolts;clamps ; hold fasts ; wall ties hooks forhanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-0 (using 12.5mm graded aggregate as in copings etc including necessary form work complete all as specified and directed.

Taking up or down 15mm dia GI tubing and connections including removal complete all as specified.

Taking up or down 20mm dia GI tubing and connections including removal complete all as specified.

S&F Rotational moulded polythylene 1000 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position inlcuding taking down existing tank complete all as specified.

S&F in repair 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&Fin repair 15mm bore bib tap, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule,complete all as specified and directed

S&F in repair 15mm bore stop valves, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union, complete all as specified and directed

S&F PVC (SWR)multi floor trap 75mm bore dia outlet with grating setting and jointing with solvent complete all as specified and directed.

S&F in repair 40mm Low density polyethylene (LDPE) pipes of pressure rating 6kg/sq.cm complete all as specified and directed

Demolition of cement concrete in any position not otherwise specifically provoded for complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan ( pedestal pattern ) white complete including ‘P’ or ‘S’ trap , seat cover and fixing to flushing cistern, brackets, flushing pipe etc complete all as specified.

S&F in repair 10 litre capacity PVC valveless, low level, synphonic action type, flushing cistern, with inlet, ball valve, float valve, handle including brackets, complete all as specified and directed.

S&F in repair soap dish any type fixed to plugs with chromium plated screwscomplete all as specified and directed

S&F in repair 110mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors etc, complete all as specified and directed.

S&Fin repair 110mm bore dia PVC (SWR) bends, complete all as specified and directed.

S&F in repair 110mm bore dia PVC (SWR) branch piece double (double Y) complete all as specified and directed.

S&F in repair 75mm bore pipe PVC (SWR) vent cowl and fixed, complete all as specified and directed.

Material & labour cutting into existing manholes for connecting new drains of 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4, type B-1 smooth finished complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of white wash complete all as specified and directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frames) exceeding 1.50 Sqm but n exc 4 Sqm each, complete all as specified and directed

S&F in repair 15mm dia pillar taps,fancy type, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered 'Hot' and 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

M&L in repair 32mm dia waste fittings,brass,chromium plated for glazed ware sinks,basins,etc.with long screwed and fly-nuts,flange end bedded In red lead cement and other end fixed.

S&F in repair vitreous china, wash hand basin, flat back of size 550mmx400mm including brackets and pinning ends of brackets or errecting stand, complete all as specified and directed.

M&L for chromium plated fancy type towel rail with hooks , complete all as specified and directed.

Point wiring concealed for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green color) as earth lead in and including PVC pipe medium grade of suitable size concealed with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

All as per srl item No-110 here in above but for one 3 pin 5A socket outlet independent controlled by one switch.

All as per srl item No 110 here in above but for one 5A socket outlet on the same board controlled by one switch.

All as per srl item No-110 here in above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable as earth lead.

M&L for Switch piano flush button single pole one way 5 amps 240 volts all as specified and directed.

M&L for Switch Socket combination, 6 pin 5 and 15 amps multi purpose 2 in 01 flush type, 230 volts all as specified and directed.

Ceiling rose surface bakelite 2 to 3 terminals all as specified and directed.

S & F Lamp holder insulated body with back plate for batten fittings all as specified and directed.

S & F LED Lamp 09W fixture with in built electronic driver complete with all accessories prewired and connecting electrically to ceiling rose using PVC FRLS insulated and overall sheathed cable Make- Havells , Cat Part no LHLDEUHEML8R009 or equivalent of make phillips or Crompton complete with LED lamp.

S & F in heavy duty PVC flat two core cable weather proof with aluminium solid conductor 1100 volts grade 16 sqmm 2 core for service wire pole passing through pipe including all fitting all as specified and directed. .

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed. Make Cat Part No BIBWP 9W LED, Bajaj or equivalent in Philips/Crompton.

S&F of double door type SPN DB 08 Way ,240V with 100A copper busbar each phase , with metalic double door type IP-43 IK 09 protection suitable for housing MCB's all as specified and directed by EIC. Note : MCB DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding all as specified and directed.

S & F MCB SPN 40 Amps,10KA 'C' series 240V complete all as specified and directed.

S & F LED Lamp 1x18W,220 volts AC decorative box type with driver holder including LED tube light connecting up three core flexible copper conductor of suitable sizes complete all as specified and directed. Make Cat Part No : Bajaj BCLAB SD 18 NW or equivalent in Philips/Crompton.

M&L for earthing complete with GI earth plate electrode 600x600x3.15 mm thick burried in ground ( earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level , connecting to the coppers strip 20x3.15 by means of bolts,nuts, checks, nuts , bolts & washers of copper and 20x3.15 mm earth lead protection by provision of GI light grade pipe 40mm bore including provision of concrete pit made from PCC (1:2:4) type B-1 using 20 mm graded stone aggregate with 40 mm thick cover of RCC (1:3:6) reinforced with XPM(weight not less than 4 kg/Sqm) and frame o f angle iron 25x25x6 mm with lugs 02 nos and with 6 mm dia MS bar handle made to shape GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 meter long placed on top edge of earth plate , common salt and charcoal filling , test point made out of phosporous , bronze test point terminal fixing arrangement , funnel , wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 meter all as per electrical plate No. 03 of SSR Part-I 2009 connecting to earth test point all as specified or indicated including testing on completion. Note:- (i) item of earthing includes cost of 7.5 meter long copper strip 20mmx3.15mm size ,protection pipe of 15mm dia GI medium grade any variation in length shall be adjusted through deviation order based on SSR rates enhanced by (-)14.5%(Minus). (ii) On testing after completion of earthing if the desired earth resistance is not obtainted earthing will be re-done by the contractor at his own risk and cost to the entire satisfaction of Engr-in Charge.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as reqd 32mmx6mm galvinsed iron complete all as specified.

Aluminium strip 25mmx3.15 mm with saddles and fixing screws etc. for roof conductor and down conductor above ground complete all as specified.

Supply and fixing single pointed air termination Aluminium rod 12mm dia 300 mm long for fixing on GI strip duly suitable fixing arrangement and making threading in one end and suitable nut with check nuts of air termination rod all as specified and directed by Engr-in- Charge.

M&L Test point terminal block made of gun metal or phosphrus bronze size 7mm5x75mmx25mm drilled and screwed including 3 no.8mm dia 25mm long hexagonal head screw complete all as specified.

M&L for 40mm dia medium grade galvanised iron pipe with all fittings and fixed complete to walls, floors of air termination rod complete all as specified.

M&L Sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete all as specified. Note : Only punned thickness shall be measured.

M&L Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' laid across the cable complete all as specified.

Supply & laying and testing cable XLPE insulated ,screened PVC bedded, galvanised steel strip or wire armoured, electric power cables heavy duty 1100 volts grade with standerd aluminium conductor of size 25 sqmm 3.5 core complete all as specified.

Supply and fixing cable jointing kit for 1.1 KV grade cable for outdoor termination , heat shrink type, joint complete with jointing material and accessories suitable for 3.5core XLPE, armoured, conductor cable of size 25sqmm complete all as specified.

Supply and lay galvanized iron pipe “Medium class”, including fittings 80mm dia,including road cutting and complete earth work,directed by Engr-in-charge complete all as specified.

Supply and fixing in repair LED flood light 35 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. Make Cat Part No ENXTP36 LWNCR PCSD, Bajaj or equivalent in Philips/Havells.

Supply & fixing in replacement of junction box of size 250mmx200mmx150 mm made of MS Sheet 1.6mm thick, front door openable with fixing screw painting with two coats of synthetic enamel powder coated paint over a coat of red oxide including alumn bus bar 4 Nos of size 25mmx3mm mounted on epoxy based post insulators and drilled holes for connection including 01 Nos MCB SPN 20 Amps , 1 Nos MCBs 06 amps incl magnetic lock system all as required and fixed to poles using MS strip of size 32mmx6mm and nuts & bolts of required size all as required at site or directed by Engr-in-charge.

S&F Mild steel galvanised iron water tubing 25 mm bore with screwed & socket joints, medium grade with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. fixed to wall or ceiling or laid in floor complete, all as specified and directed.

Supply, fixing, jointing and testing, ISI Marked, of approved quality, gun metal globe/gate valve 20mm dia with iron wheel head, both ends screwed for iron pipe complete all as specified and directed.

Material & labour for repair of earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx6mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level. connecting to the GI wire 4 mm dia by means of bolls, nuts, check nuts and washers of galvanised iron and earth wire protected by provision of GI light grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and handle of 6mm dia MS bar made to shape, GI medium grade 20mm bore pipe for watering , perforated at bottom. 1.75 metre long placed on top edge of earth plate. charcoal and common salt filling with fixing arrangement, funnel wire mesh and earth work in soft soil returning filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate 3 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion. NOTE :- (i) Item of earthing includes cost of 7.5 m long GI wire of size 4 mm dia with protection pipe of 15mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates adjusted by (-)14.5%(Minus). (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost.

Supply, laying and testing cable XLPE insulated screened PVC bedded galvanized steel strip or wire armored electric power cable heavy duty 1100 volts grade with slandered aluminum conductor of size 95 Sqmm 3.5 core complete all as specified.

Supply and fixing cable jointing kit for 1.1 KV grade cable for outdoor termination , heat shrink type, joint complete with jointing material and accessories suitable for 4 core XLPE, armoured, conductor cable of size 95Sqmm complete all as specified.

M/S GH MOHAMMAD DAR

M/S Hilal Constructions

FIRDOUS AHMAD BABA

M/S NEW JOHAN TRADERS