Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.8 LAccepted-AOC EY 04 PODA WC CHANDIGARH A I A II B I | CHANDIGARH | CHANDIGARH | 160001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹40.5 L+₹1.5 L (3.77%)Rejected-Finance D 89 SHASTRI NAGAR MEERUT 250004 | MEERUT | UTTAR PRADESH | 250004 | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹41.3 L+₹2.4 L (6.03%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 | |
| 4 | L4₹41.5 L+₹2.5 L (6.32%)Rejected-Finance 16 21 D 2 HARJU PURA TAJGANJ AGRA | AGRA | AGRA | UTTAR PRADESH | L4 | Rejected-Finance Being other than L1 | |
| 5 | L5₹41.8 L+₹2.8 L (7.14%)Rejected-Finance | L5 | Rejected-Finance Being other than L1 |
Tender Value
₹43.3 L
EMD Value
₹86,600
Closing Date
17 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (East) Agra
Garrison Engineer (East) Agra, Military Engineer Services, Gwalior House, 62 Taj Road Agra Cantt-282001
ADDN/ALTN TO BLDG NO T-31 (OFFICE BLDG) OF 801 ENGR REGT UNDER AGE B/R-I OF GE (EAST) AGRA
2024_MES_636636_1
9618/E8
Open Tender
Civil Works
Item Rate
180 days
AGRA (UP)
Please refer tender documents
10 documents required · 10 mandatory
₹500
GE (East) Agra
₹86,600
Yes
23 Mar 2024
10 Jan 2024
24 Feb 2024
10 Jan 2024
17 Feb 2024
24 Jan 2024
Amount
Dismantling/ demolition of polymeric water proofing membrane single layer with and including plaster, PCC, Padding, brick coba etc on roofs complete including removal of material and debris away from the site etc complete all as specified and directed.
Material and labour for 25 mm thick PCC 1:2:4 type B-1 using 12.5 mm graded stone aggregate as in roof kerbs, paddings, mud stops slightly chamfered or rounded in edges including required grove cutting complete all as specified and directed.
Material and labour for applying 15 mm thick plaster in CM 1:4 including water proofing compound @ 2% by weight of cement finished even and smooth complete all as specified and directed. (Note : WPC shall Be Measured and Paid Separtly).
M & L for Provn of polymeric water proofing roof treatment to non assessable RCC roof described as under and all as specified :- (a) Preparing RCC roof surface and applying one coat of bitumen primer @ Rs. 0.30 Kg /Sqm (b) Applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm (c) Laying of water proofing treatment APP modified polymeric water proofing membrane of weight not less than 3 kg/sqm with non woven polyster mat of weight 160gms/sqm as centre core and without multiple layers of polyethylene, finished on top and bottom with 7 micron thick flammable polyethylene applied by thermo fusion using LPG torch on the bottom portion of the membrane unrolled and bonded to substance with side and end laps 75mm and 100mm as per manufacturer’s all as specified. (d) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm . (e) Applying two coats of aluminium paint @ 100 gm /sqm ( each coat) .
Supply only integral water proofing compound complete all as specified and directed.
Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and pre-cast concrete articles complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed.
M&L for 15mm thick rendering in CM 1:4 on fairface brick or concrete surface with water proofing compound @ 3% by weight of cement finished fair complete all as specified and directed. Note : Water proofing compound shall be measured and paid seperately under respective item of Sch ‘A’.
M&L for 15 mm thick rendering in CM 1:6 on other than fair faces of brick or concrete surface with finished fair and even complete all as specified and directed.
Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over 3mm thick wall care putty on wall complete all as specified and directed.
M&L for complete removal of existing treatment of old plastered surfaces of wall and applying two coat of oil bound distemper with roller on old decorated wall surfaces over 3 mm thick wall care putty complete all as specified and directed.
Material & Labour for preparing newly plastered surfaces of wall, applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm and 3mm wall care putty over new surface of wall complete all as specified and directed.
Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm including complete removal of existin treatment old wall surface complete all as specified and directed.
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete , including taking out, cleaning of flase ceiling and handling removing from site or stacking for reuse complete all as specified and directed.
Dismantling asbestos cement (corrugated semi corrugated etc ) sheets in roof covering above 12 to 15 m height complete all as specified and directed.
S&F for pre- painted galvatume aluminum zinc coating GI based corrugated steelsheet 0.50mm thick of and colour having tensilestrength of 550 Mpa as in roof covering/cladding towall, fixed with selftapping screws up to a height of 12 to 15m complete all as specified and directed.
S&F GI snap grid frame work for false ceiling all as specified of grid 605 x 605 including GI hangers of suitable dia and fixed to purlin/rafters as specified.
S&F 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.
Fixing only 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws but fixed for using old Non asbestos fibre cement building boards complete all as specified and directed.
S& F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.
M&L glazed ceramic non skid joint free coloured tiles (1st quality/premium quality) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18Sqm but not exc. 0.38 Sqm as in floors etc set and joint free in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed.
M&L for coloured glazed ceramic tiles (Digital & designer Pattern) in vertical surface 350 x 250 x 7 mm / 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:3 on brick wall complete all as specified and as directed .
M & L for Vitrified tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor over and including 15mm thick cement screed bed in CM (1:6) complete all as specified & directed.
M&L MS work as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, complete all as specified and directed.
Dismantling timber scantlings 40 Sqcm and over in section, in any position complete all as specified and directed.
S & F Mild steel angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps, plain angle cleats for securing purlins and similar small articles confirming toFe-290 Gde-E-165 including for drilling the members for site, fitting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats connections complete all as specified and directed.
S&F joist, channel, angle or tee sections fixed independently without connecting platges, etc (cut to ordinary length) including welding to other steel members of Fe 410 Gde complete all as specified and directed.
S&F Rolled steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe-290 grade E-165 including for drilling the members for site, Fabrication, fitting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting connections complete all as specified and directed.
Taking up or down 15mm bore steel tubing and connection complete all as specified and directed.
Taking up or down 20 mm bore steel tubing and connection complete all as specified and directed.
Supply and fixing 20 mm bore galvanised tubes medium grade , with all fitting and fixed complete to walls and ceilings,roofs or laid in floors complete all as specified and directed.
Supplying and laying 20 mm outer diameter of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.
S & F 20 mm outer diameter of CPVC brass elbow fixing to CPVC pipes any location complete all as specified and directed.
S & F 20 mm outer diameter of CPVC female brass Threaded Adaptor (FTA/ FBTA fixing to CPVC pipes any location complete all as specified and directed.
S & F 20 mm outer diameter of CPVC brass tee fixing to CPVC pipes any location complete all as specified and directed.
Cutting chases for pining in for GI pipe, conduit complete all as specified and directed.
Dismantling Water tanks, open or closed, hoisted and fixed in position complete all as specified and directed.
S&F 500 Ltr Rotational moulded polyethylenewater storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.
S&F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed.
S & F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.
S&F in repair PVC connection 15mm size with PTMT nuts, 450 mm long complete all as specified and directed.
S&F in repair PVC connection 15mm size with PTMT nuts, 600 mm long complete all as specified and directed.
S&F in repairs Vitreous China wash hand basin white flat back size 550x400mm including cutting for and pinning in ends of brackets or erecting stand , 32 mm dia Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm 45gms/40mm-60 gm) and 32 mm PVC flexible waste pipe 800mm long etc complete all as specified and directed.
S&F in repair 15mm bore, brass chromium plated pillar cock (foam flow) screwed down for pipe and fixed complete all as specified and directed.
S&F in repair 32 mm bore PVC pipe as in waste pipes for sinks & WHBs, complete all as specified and directed.
S & F in repair tubular towel rail brass chromium plated 20 mm Dia with brackets type fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
S&F in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimumweight 90gms) complete all as specified and directed.
S& F in repair single piece EWC with UF seat cover hinges,fixing accessories set,cistern fittings,rim Less tornado flushing size 360 680x750 mm complete all as specified and directed.
S & F in repairs CP health faucet ABS body with wall hook and 1 mtr SS braided connection pipe, fancy type with necessary brass nuts & rubber washers, covered with chromium plated spring complete all as specified and directed.
S & F in repairs 15 mm bore chromium plated fancy bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair 15 mm bore CP Stop valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.
S & F in repairs toilet paper holder with flat recessed type stainless steel, chromium plated or stainless steel with necessary brass nuts & rubber washers, covered with chromium plated spring complete all as specified and directed.
S & F in repairs 75x125mm dia of PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete all as specified and directed.
S & F in repairs 125/110 mm dia of PVC (SWR) Gully trap, plain with grating incl jointing with solvent cement complete all as specified and directed.
S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall and floor complete all as specified and directed.
S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall and floor complete all as specified and directed.
S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
S & F 75 mm bore PVC (SWR) bends with access door of any radius complete all as specified & directed.
S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
S & F 110 mm bore PVC (SWR) bends with access door of any radius complete all as specified & directed.
S&F 110 mm bore PVC (SWR) single T with access door of any radius complete all as specified & directed.
S & F 110 mm bore PVC (SWR) cowl of any radius complete all as specified & directed.
Taking down Chowkhats or frames not exc. 1.5 sq. m but (without taking off shutters from the frames each complete all as specified and directed.
Taking down Chowkhats orframes exc. 1.5 sq. m but n. exe 4 sqm (without taking off shutters from the frames each complete all as specified and directed.
Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed.
Refixing the shutters of any description exc 1.00 Sqm but not exc. 2 Sqm each in the same opening or in other opening complete all as specified and directed.
M&L for mild steel farmed work as in doors (as in chowkats) or gates of angle or other section with guest plates rail, brasses rail etc exculsive of steel sheeting or other covering hanging also fastening and fixing complete confirming to GdeFe-410-W (Gde-E-250) quality-B including shop coat of red oxide including prepration of surface before fixing complete all as specified and directed.
S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed.
S& F Factory made Solid PVC Moulded Door Shutter with Particle Boarde core, 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2 mm thick Moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing. complete all as specified and directed.
S& F 150 mm Aluminium handles, cast type,anodised fixed complete all as specified and directed.
S& F 200mm long Aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 300 long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S & F in repairs rubber gasket for aluminium door and window complete all as specified and directed.
S&F in repairs Stainless steel drapery rods, 20mm internal diameter including decorative type brackets and PVC curtain rings 8 Nos per RM including fixing arrangement with drilling holes in walls, brackets etc complete all as specified and directed.
M&L PCC 1:3:6 C-2 (using 40mm graded crushed stone aggregate) as in plinth protection, path ( 75 mm thick ) finished cement concrete surface even and smooth without using extra cement complete all as specified and directed.
M&L for Preparation of New or previously untreatedwood and wood based surface of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.
M&L for Preparation of New or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide complete all as specified and directed.
M & L for applying one coat of synthetic enamel paint including preparation of old wooden surface of any discription not otherwise discribed over 10 cm width or girth, complete all as specified and directed.
M&L for Preparation of old wood and wood based surface of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint complete all as specified and directed.
S&F 3 mm thick sheet glass, ordinary quality, plain/frosted on one side for window/ventilators in square not exceeding 0.50sqm each pane complete all as specified & directed.
S&F 2nd class hard wood plain, solid, straight chowkats or frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified & directed.
S&F or skeleton factory made door shutter, 35mm thick of 2nd class hard wood (hollock), open rebated and prepared to receive glass, gauge ( without sash bars) with plain, chamfered or rounded, mitred beads for glass etc , size of members of shutters shall be as specified in SSR Part I, section -8 clause 8.24 (a) complete all as specified and directed.
S & F Second class hardwood factory made door 35mm thick plain framed, panelled shutter (Two pane) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part I) klin seasoned and chemically pressure treated complete all as specified and directed.
S & F factory made steel windows with side hung shutters including box type hinges with Z section steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S & F factory made steel windows with side hung shutters including box type hinges with Z section steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.
S & F Butt hinges, medium weight,cold rolled mild steel, 100mm size complete all as specified and directed.
S&F in repair 4 mm thick sheet glass, ordinary quality and fixed with aluminum beading and gaskit suitable for aluminum frames/glass putty in MS windows not exceeding 0.5 sqm in each pane complete all as specified and directed.
S & F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed in steel frame/wooden and fixed with stainless wire staples complete all as specified and directed.
S&F in repair of galvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tack or galvanised wire staples complete all as specified and directed.
S&F for 150 mm long Aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F in repairs 150 mm long Aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F in repair floor door stopper of aluminium alloy body and tongue, anodized of lentgh 150 mm including rubber shoed fixed wooden or aluminium frame (door/shutter) complete all as specified & directed.
S&F in repair Door closer (aluminium ectruded section)hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in widthand of weight between 61 to 80 kg and fixed complete all as specified and directed.
S&F lnsulated PVC Wall Lining (25mm)consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC\ sheet duly fitted into the wall as per specifications and drawing but PVC Insulated Panel with wood grain printed PVC sheet used instead of plain colour sheet complete all as specified and directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.
S & F steel ventilators with top hung shutter & glazing bars hinges, steel peg stay etc dovetailed or welded, size and thickness of members confirming to IS 1038 complete all as specified and directed.
S&F powder coated anodized aluminium door & frame with reqd size of aluminium sections weighing 0.55 kg/mincluding 5 mm thick tinted glass coloured in half portion and in other half portion 4 mm thick ACP sheet of any colour complete and fixed with anodized aluminium snap beading, glazing clips, joining clips, screws and 02 Nos of aluminium handle on each door shutter, aluminium anodized tower bolt 200mm long 02 Nos on each shutter and mortice lock device complete with double keys for each lock, 01 No Hydraulic door closer for each shutter complete all as specified and directed with following specifications:- (a) Aluminium door frame = 101.50x44.45mm (b) Aluminium style/top & middle rails of shutter = 83.5x44.45mm (c) Aluminium bottom rail of shutter = 114.50x44.45mm (d) Aluminium door frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and directed.
S & F in repairs Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.
S & F powder coated Anodised aluminium three track sliding window made of extruded profiles with reqd size of aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings and plain glass on two shutters and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples on one shutters with two nylon roller on each shutters including star lock handle complete all as specified and directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, fan regulators, ceiling roses, pendants, lamp holders incl CFL/Bulb, light fitting etc, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.
M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts. grade FRLSH PVC insulated unsheathed cable with proper colour coding drawn in including PVC concealed conduit not less than 20 mm dia with all accessories and FRLSH PVC insulated 1.5 Sqmm multi standard sheathed copper wire for continues earth, including cutting and chasing of wall surface for laying PVC conduit and sunken box and connecting earth and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles. Note : Heavy duty Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit is not feasible at no extra cost for the following :- (a) One light point or one fan point controlled by one switch
One 3 pin socket outlet 5 amps on the same board with other switches complete all as specified and directed.
One 3 pin socket outlet 5/6 Amps on independent board complete all as specified and directed.
One bell/buzzer point controlled by one push button complete all as specified and directed.
All as per item No 104.00 here in before but with cable FRLSH size 4 Sq mm for one 15 Amps / AC socket out let with multistrand insulated copper earth continuity conductor FRLSH of size 4 sqmm complete all as specified and directed.
S&F switch piano flush button single pole one way 5 amps 240 volts with polycarbonate body complete all as specified and directed.
S&F switch piano flush button single pole one way 15 amps 230 Volts with polycarbonate body complete all as specified and directed.
S&F socket 5 amps 5 pin flush type, 240 volts. with polycarbonate body complete all as specified and directed.
S&F socket out let, 6 pin 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts with polycarbonate body complete all as specified and directed.
Supply and fixing Bell push, flush type, 5 amp, complete all as specified and directed.
S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed.
S&F ceiling rose , PVC/polycarbonate, insulated body surface Bakelite 65mm dia three terminals complete all as specified and directed.
S&F call bell, Ding dong type, 230 volts AC single pole complete all as specified and directed.
S&F in repair LED batten Tube Light surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption <20W (4 feet 20W) luminaire lumen >1000 lm, system efficiency of >120 lumens /W, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 450C, driver efficency>85%, power factor>0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and seafty extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification including dismantling of old unsv light fittings complete all as specified and directed.
S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC, 6500 K surface/ recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver and connecting the same to electric source with & using PVC sheathed and insulated three core copper conductor cable of size 0.75 Sqmm and fixing arrangements for fixing the light fitting complete all as specified and directed.
S & F LED light fitting 1x9W/1X10W bulkhead luminaires made of die cast aluminium with poly carbonate cover IP 65 including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F in repair LED batten Tube Light surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption <10W (2 feet 10 W) luminaire lumen >1000 lm, system efficiency of >120 lumens /W, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 450C, driver efficency>85%, power factor>0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and seafty extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification complete all as specified and directed.
Supply and fixing in replacement LED building security light fitting 35 Watt 230 V AC out-door type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, fixed to pole or wall of building with and including suitable Bracket made out of 25 mm dia GI light grade pipe, 1.20 m long bent to shape by cutting & welding as required & directed and fixed with two Nos of FI clamps 35x6 mm to be tightened with suitable size of bolts, nut and washers and including painted with two coat of aluminium paint over a coat of red oxide primer, and including connecting the fitting to electric source with & including twin twisted copper flexible wire of size 0.75 sqmm three core with suitable size flexible PVC conduit including all accessories and fixing arrangements for fixing the light fitting and writing the date of fixing on security light with permt marker complete all as specified and directed.
Supply and fixing of ceiling fans (copper winding) complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
S&F exhaust fan made of sturdy Engineering plastic and copper winding 5 star rating complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed.
Dismantling, taking down exisitng ceiling fan and re-fixing & connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.
S&F sheet metal enclosure with socket plug top and MCB single pole and neutral with two pin and earth plug top with one SP MCB 20 Amp 240 volts complete all as specified and directed.
Supply, fixing, connecting & testing factory made, epoxy powder coated, distribution board (sheet metal encloser) , triple pole and neutral, 4 ways, (Vertical DB's) Ekinox³ TPN DB-VTPN DPX³ 160 MCCB DB's5, IP 43, IK 09 with metal door, As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 250 A Copper Busbar for each phase, With 2 Neutral bar, 2 Earthbar and Cable ties for Cable management, Fully insulated busbar & shrouded Neutral bars, Improved Pan assembly for ease of installation, Prefitted masking sheet, With provision for DPX³ 160 MCCB as incomer and SP/TP MCB's as outgoing including dismantline of old unsv DBs and MCBs complete all as specified and directed.
Supply and fixing MCCB 4 pole, 160 Amps, 50 Hz, Icu=16 KA at 415 volts with thermal magnetic alongwith adjustable magnetic protection for current setting Icu=Ics = 100% with adjustable over load setting (minimum 80% to 100%) value from 10 to 15 times of related capacity as per IEC-60947-1 and 60947-2 standard complete all as specified and directed.
Supply and fixing in repair MCB DB single pole with neutral sheet metal enclosure double door type, 240Volts AC, with 200 amp rated bus bar of suitable size plate and common neutral link all en-closed in standard steel sheet flush mounting type factory fab-ricated, powder coated complete with out MCB and with enclo-sure blank plates for unused way suitable for 4 way ISI marked, including taking down old unsv MCB DB and MCBs complete all as specified and directed.
Supply and fixing in repair MCB DB single pole with neutral sheet metal enclosure double door type, 240Volts AC, with 200 amp rated bus bar of suitable size plate and common neutral link all en-closed in standard steel sheet flush mounting type factory fab-ricated, powder coated complete with out MCB and with enclo-sure blank plates for unused way suitable for 8 way ISI marked, including taking down old unsv MCB DB and MCBs complete all as specified and directed.
Supply and fixing in repair MCB DB single pole with neutral sheet metal enclosure double door type, 240Volts AC, with 200 amp rated bus bar of suitable size plate and common neutral link all en-closed in standard steel sheet flush mounting type factory fab-ricated, powder coated complete with out MCB and with enclo-sure blank plates for unused way suitable for 12 way ISI marked, including taking down old unsv MCB DB and MCBs complete all as specified and directed.
Supply and fixing MCB single pole of capacity 5-32 Amps rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Supply and fixing MCB single pole and neutral of capacity 40-63 Amps rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Supply and drawing Submain wiring with two single core FRLSH 6 sqmm copper conductor, PVC insulated, multistranded, unsheathed cable ISI marked drawn in conduit concealed in wall or ceiling for sub main connection including FRLSH 6 sqmm PVC insulated multistranded unsheathed copper conductor used as earth wire to cdommon earth and connec-tion to earth dolly complete all as specified and directed. Note:- Two single core FRLSH 6 sqmm copper conductor, one run PVC conduit and one run of FRLSH 6 sqmm earth wire shall be considered & measured as one unit.
Supply and drawing Submain wiring with two single core FRLSH 10 sqmm copper conductor, PVC insulated, multistranded, unsheathed cable ISI marked drawn in conduit concealed in wall or ceiling for sub main connection including FRLSH 10 sqmm PVC insulated multistranded unsheathed copper conductor used as earth wire to cdommon earth and connec-tion to earth dolly complete all as specified and directed. Note:- Two single core FRLSH 10 sqmm copper conductor, one run PVC conduit and one run of FRLSH 10 sqmm earth wire shall be considered & measured as one unit.
Materials and labour as in replacement for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel wire 4mm dia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 15mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.
Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire complete all as specified and directed.
Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 Sqmm 3.5 Core, including dismantling of Old Unsv cable complete all as specified and directed.
Excavating in trenches n exc 1.5m wide and n exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25cm complete all as specified and directed.
Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.
Supply and laying in High density polyethylene pipes (HDPE) double wall corrugated pipe (6mtr length) of 63mm of outer dia and 50mm inner dia laid in trenches complete all as specified and directed.
mohanlal gupta
CREATIVE CONSTRUCTION
scjha&sons
milan enterprises
3Krishna Enterprises
rohan traders
M/S SHARADA ASOCIATE
N.K. ENTERPRISES
Balaji Associates
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .