Sinking of Borewells, Providing Submersible Pumpsets and other accessories to new Borewells in ward no.104 (Varthur)

Sinking of Borewells, Providing Submersible Pumpsets and other accessories to new Borewells in ward no.104 (Varthur)

Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Sinking of Borewell of 165mm dia clear using super Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burd...

Borewell depth of 50 to 100 m

Borewell depth of 100 to 150 m

Borewell depth of 150 to 200 m

Borewell depth of 200 to 250 m

Borewell depth of 250 to 300 m

Borewell depth of 300 to 350 m

Borewell depth of 350 to 400 m

Borewell depth of 400 to 450 m

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supply of ISI mark 175mm nominal bore,plain and Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendme...

Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)...

Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per ne...

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments (Water S...

Providing wrought mild steel (galvanized) 50 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any. (Water Supply and UGD Works (Common SR 2023-24 Volume-5- Page No.129,SL.N...

Supply and delivery at site wrought middle steel (galvanized) GI union confirming to IS 1239-II, 1991 with latest amendments if any.For 50 mm dia GI Union (Water Supply and UGD Works (Common SR 202...

Supply and delivery at site wrought middle steel (galvanized) GI hexagonal nipple confirming to IS 1239-II, 1991 with latest amendments if any For 50 mm dia GI hexagonal nipple (Water Supply and UGD ...

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments (Water Supply and UGD Works Common SR 2023-24 Volume-5- Page No....

Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for:(Water Supply and UGD Works Common SR 2023-24 Volume-5- Page ...

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as p...

Supplyng of TPST with rewireable porcelain channels in SM inclosure made out of 14SWG powder coated paint of Approved colour 32 amps (Ele SR-2,2023-24 P.NO-14,SL.NO-5.5,I.NO-5.5.1)

Supplying and fixing polished wood board made of not less than 15mm thick planks on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs, screws et...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440V A.C.50 Hz 12/24v.D.C (Ele SR-2,2023-24 P.NO-19,SL.NO-5.38)

Supplying fixing and wiring heavy duty low voltage capacitors confirming to IS 2834,3phase 400/440 volts grade for power factor improvement of rotating machinaries like induction motor. 2KVAR (Ele SR...

Supplying and fixing miniature circuit breakers on existing MCB, distribution boards using necessary fixing materials and c type curve,indicator ON/OFF,energy cross-3 with short circuit breaking capac...

Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...

Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...

Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools a...

Providing,Supplying and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with necessary materials...

Supplying and fixing of porcelain fuse channel with cutout on existing wooden /pannel using necessary nuts, bolts and washers 32amps (Ele SR-2,2023-24 P.NO-14,SL.NO-5.7,I.NO-5.7.2)

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...

Providing and installing at site of work P.V.C. pipes including cost of pipes and Specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...

For 65 mm dia GM (Copper alloy) Gate valves I/No.16.7 SOR Code N180G