Supply of Furniture items for Op Wks Shelters in 2 Mtn Div Sector

F.O.R : DINJAN

Chair Writing Wooden. Chair Writing of size 535 x 470 x 890 mm shall be provided. Chair shall be made out of well seasoned 1st class teak wood free from knots. All wooden exposed surfaces shall be finished with to coats of French Polish high gloss finish after preparation of wooden surface. Plastic cane seat of size 470 x 470 x 535 with arm rest of size 60 x 25 mm shall be provided. The legs will be fitted with hard PVC shoe. All as per drg No FD 280 Sheet 1/1 and technical specification given in Shedule-I(A) of RFP.

Writing Table. Table of size 1145 x 610 x 760 mm shall be provided. Table top shall be 19 mm thick pre-laminated decorated particle board fixed with hollow section frame with screw @ 200 mm c/c. The frame work of table shall be of MS hollow section of size 25 x 25 mm all as per drg. End of legs will be sealed with MS sheet 1.6 mm thick with proper welding process to avoid the dust entry. 6 mm thick teak wooden lipping shall be provided on all the exposed edges of MDF duly treated with French Polish as specified. All steel surface will have two coats of synthetic enamel paint over a coat of red oxide primer. The legs will be fitted with hard PVC shoe. All as per drg No WT 1/1 and technical specification given in Shedule-I(A) of RFP.

Chair Dining. Chair dining of size 440 x 430 x 890 mm shall be provided. Chair shall be made out of well seasoned 1st class teak wood free from knots. All wooden exposed surfaces shall be finished with two coat of French polish high gloss finish after preparation of wooden surfaces. Single piece PVC seat of size 440 x 430 x 405 mm with 4 x 10 mm thick Ribbsmoulded shall be provided. The legs will be fitted with PVC shoe hard. All as per Drg No FD/MAP/03 SH 1/1 & technical specification given in Schedule-IA of RFP.

Table Dining. Table dining of size 1800 x 900 x 750 mm shall be provided. Table top shall be 19 mm thick pre-laminated decorated particle board sheet fixed with hollow section frame with screw @ 200 mm c/c. The frame work of table shall be of MS hollow section of size 25 x 25 mm all as per drg. End of legs will be sealed with MS sheet 1.6 mm thick with proper welding process to avoid the dust entry. 6 mm thick teak wood lipping shall be provided on all the exposed edges of MDF duly treated with french polish as specified. All steel surface will have two coats of synthetic enamel paint over a coat of red oxide primer. The legs will be fitted with PVC shoe hard. Refer All as per drg No DT 1/1 & technical specification given in Schedule-IA of RFP.

Stainless Steel Table. Stainless Steel Table of size 1800 x 750 x 760 mm shall be provided. Table top shall be 14 gauge stainless steel sheet on top fixed with 35mm stainless steel square pipe with screw. The frame work of table shall be made of stainless steel tube of size 35 x 35 x 1.25 mm thick all as per drg. Stainless steel wire mesh shall be fixed at the bottom of the table as per drg. The legs will be fitted with hard rubber shoe. All as per drg No SST 1/1 & technical specification given in Schedule-IA of RFP.

Almirah Steel Large. Almirah steel large shall as per drawing of size 1300x485x1985mm made up of 20 mm thick MS sheet. Four number of shelves shall be provided equally spaced to make five compartments. One chromium plated handle 150 mm long with 3 way locking device shall be provided. In addition one hasp and staple of size 150 mm long shall be provided for alternative locking arrangements. All steel surfaces internally and externally to be painted with 2 coats of synthetic enamel paint over a coat of red oxide. All as per Drg No ASL 1/1 & tecnical specification given in Schedule-IA of RFP.

Store Rack. Consists of four platforms, each made of rigid angle iron frame work to hold 4'x2',12mm thick plywood. All four rigid platforms to be supported at four corners with angle iron vertical columns as per spacing mentioned in drawing No SR-1/1 with suitable nut bolts. Angle iron size 40mm x 40mm x 5mm to be used. Bracing with MS flat of size 40mm x 5mm to be provided at the rear. All as per drawing No SR-1/1 and technical specification given in Part-II of RFP.

Hi-Tech India

Hi-Tech India